Skip to the content
2 layers357.7 × 136.8 mmDIY Keyboard, the printed circuit board in 3D

diy keyboard for blueprint

Size
357.7 × 136.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
173
Nets
119
Pads
645
Tracks, vias
859, 0
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Oct 2025
Updated
2 Jan 2026

Overview

DIY Keyboard is an open-source printed circuit board by moritz-prenner, from the moritz-prenner/DIY_Keyboard repository on GitHub. It is a 2-layer board of 357.7 × 136.8 mm with 173 parts on 119 nets, routed with 859 tracks and 0 vias.

It is built around the PEC11R-4215F-S0024. Its parts include 84 diodes, 83 switches and 1 IC. It belongs with the keyboards and input boards of this library.

Main components

1

README

README.md

DIY_Keyboard

This project is a full size Keyboard powered by a rp2040 pro micro and a custom pcb designed by myself :) After I am going to build it it should (hopefully) function like a regular storebought keyboard. It even contains a knob to control volume for example. I built this project to get better at pcb design and learn something new about keyboard firmware.

Note for the reviewer:

As you probably already seen, my total (in the bom) is around 95$. But this number is without the filament cost for the printing of the case. Even tho I am probably going to spend my tickets I am going to earn with this project on filament, I still estimated the cost and added it to the bom total. That makes my funding request (around 120 - 130 $) - of course I am going to return the rest if it is cheaper than expected.

image image (1) image (2) Screenshot 2025-11-16 191924

Parts

173
QtyValueFootprintReferences
841N4148Crystal:Crystal_SMD_G8-2Pin_3.2x1.5mm_HandSolderingD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +68
69SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +53
8SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.25u_PCBSW59, SW73, SW74, SW75, SW77, SW78, SW79, SW80
3LOGOLOGOG***, G***, G***
1PEC11R-4215F-S0024My-Lib:XDCR_PEC11R-4215F-S0024MT1
1SSD1306displays:oled_screenBrd1
1SW_PushButton_Switch_Keyboard:SW_Cherry_MX_6.25u_PCBSW76
1SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.75u_PCBSW46
1SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.50u_PCBSW31
1SW_PushButton_Switch_Keyboard:SW_Cherry_MX_2.75u_PCBSW71
1SW_Pushkeyboardkey:SW_Cherry_MX_ISOEnter_PCB_v2SW44
1SW_PushButton_Switch_Keyboard:SW_Cherry_MX_2.00u_PCBSW29
1~My-Lib:pro_micro_rp2040U1

Similar boards

  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 6 layers66 × 66 mmPD240W kicad, the printed circuit board in 3D

    PD240W kicad

    theohg/PD240W

    PD240W is a complete hardware and firmware project converting USB-C Power Delivery into a programmable 240W (48V 5A) bench power supply, featuring C++ code for Raspberry Pi Pico, custom PCB Gerbers, and a 3D-printable…

    299 parts125
  • 2 layers139.7 × 123.2 mmPOC TB, the printed circuit board in 3D

    POC TB

    mquerostudio/MQ-One

    Archivos del MQ One y mi Trabajo Final de Grado :)

    296 parts58
  • 2 layers365 × 160 mmOrthoCodeCase, the printed circuit board in 3D

    OrthoCodeCase

    Jrodna/OrthoCode

    Ortholinear keyboard with thumb clusters and a rotary encoder designed with all THT components and regular keysets.

    214 parts18GPL-3.0
  • 4 layers29.3 × 187.1 mmLeft Frame, the printed circuit board in 3D

    Left Frame

    FlightDeckDIY/G1000-NXi-Mega

    Welcome to the G1000 NXi Mega project! This repository contains the schematic and PCB design files for a custom-built G1000 avionics panel, designed specifically for use with flight simulators like Microsoft Flight…

    127 parts14
  • 2 layers61.9 × 62.6 mmKeydeck, the printed circuit board in 3D

    Keydeck

    jimmydin7/keydeck

    Keydeck is a hardware project, a custom designed macropad with a fully built from scratch PCB, schematic, routing, and 3D model + printed case.

    9 parts7
  • 4 layers155 × 103 mmMEMLNaut 0 3, the printed circuit board in 3D

    MEMLNaut 0 3

    MusicallyEmbodiedML/MEMLNaut

    138 parts6
  • 4 layers81.3 × 108 mmMyriad 0.4, the printed circuit board in 3D

    Myriad 0.4

    Emute-Lab-Instruments/Myriad

    Sources for Emute Lab Instruments Myriad eurorack module

    185 parts2MIT

Questions

How big is the DIY Keyboard PCB?

It measures 357.7 × 136.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DIY Keyboard use?

173 parts, built around the PEC11R-4215F-S0024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DIY Keyboard KiCad files?

From the moritz-prenner/DIY_Keyboard repository on GitHub, at the commit this page was made from: the board is PCB_Files/DIY_Keyboard.kicad_pcb and its schematic PCB_Files/DIY_Keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DIY Keyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask moritz-prenner before reusing the design.