

Minixpad
Personal XInput controller project for ESP32
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 39
- Pads
- 85
- Tracks, vias
- 72, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Aug 2022
- Updated
- 5 Sep 2022
Overview
Minixpad is an open-source printed circuit board by mordae, from the mordae/mxpad repository on GitHub, published under the ISC licence. It is a 2-layer board with 9 parts on 39 nets, routed with 72 tracks and 4 vias.
It is built around the FSM103A, COM-09032 and WS2812B. Its parts include 2 ICs, 1 resistor, 1 diode and 1 connector. It belongs with the ESP8266 boards of this library.
Main components
3FSM103A
插件-35℃~+85℃ 100,000 Cycles 12mm 12mm 2.6N 24V 50mA 7.28mm PC Pin Round Button SPST-NO Through Hole Plugin Tactile Switches ROHSTE ConnectivityTactile SwitchesCOM-09032
插件插件 Multi-Directional Switches ROHSSparkFun ElectronicsMulti-Directional SwitchesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
9More from mordae/mxpad
3Similar boards
- 2 layers98 × 27 mm

BuildGun
ravinrabbid/BuildGun
Drop-in replacement for the electronics of the Satisfactory Build Gun replica.
36 parts1MIT - 2 layers111 × 99.1 mm

Projet Final GI Equipe2
FishyG/ProjetFinalGI
Git pour le projet final en GI. Contient l'activité 1 et 3
30 partsGPL-3.0 - 2 layers100 × 100 mm

Macropadultra
LimesOrLemons/Macropaduno
An ESP32-S3 handheld controller with a custom PCB and 3D-printed enclosure for numerous programmable functions.
67 parts - 2 layers30 × 100 mm

DroidVR PCB
xxdamlaxx/DroidVR
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
49 parts1 - 2 layers304.8 × 95.2 mm

LMN
FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project
106 parts106CC-BY-SA-4.0 - 2 layers27.3 × 34.3 mm

- 2 layers235.8 × 117.2 mm

- 2 layers130 × 109 mm

Right
Hex-4/glyph
[ a custom split keyboard for portably and comfortably interfacing with computing systems ]
49 parts11MIT
Questions
What parts does the Minixpad use?
9 parts, built around the FSM103A, COM-09032 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Minixpad KiCad files?
From the mordae/mxpad repository on GitHub, at the commit this page was made from: the board is hw/minixpad/minixpad.kicad_pcb and its schematic hw/iluxpad/iluxpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Minixpad design in my own project?
Its repository publishes it under the ISC licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

