2 layers327.9 × 139 mm
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
147 parts446
2 layers
Stonehenge
Moragor/PCB_Stonehenge4Stonehenge out of SMD components. PCBArt I guess.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 8
- Pads
- 77
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Oct 2021
- Updated
- 22 Oct 2021
Overview
Stonehenge is an open-source printed circuit board by Moragor, from the Moragor/PCB_Stonehenge repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board with 2 parts on 8 nets.
It is built around the NE555P.
Main components
1README
README.mdPCB Stonehenge
Inspired by the tombstone effect I created this silly little project.
Provided are the KiCad files including a custom footprint for the main stone circle. This is the third PCB I've ever made, so don't expect miracles xD
To manufacture the PCB you only really need front copper and mask and the edge cuts. The back is empty an there are no holes or silk screen. The pre-packed gerber zip in the files was accepted by JLC without issues.
The Assembly folder contains a picture with numbered pads and a list of which size component goes on which pad in which orientation. There's also a folder with pictures of the finished board which you can use for reference. You'll need 28x 1206, 12x 0805, 5x 0603 and 13x 0402.
Based on your experience the assembly might be a bit of a challenge. The pads are tight for aesthetic reasons, but keep in mind that it doesn't matter if you heat a component for too long since they don't need to work. I used a small chisel tip and a needle tip for my iron as well as a 10x optical stereo microscope which worked really well. You'll definitely need some form of magnification, especially for the 0402 components.
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | NE555P | Stonehenge:Stonehenge | U1 |
The 1 most common of 2 parts.
Similar boards
- 2 layers370.8 × 298.5 mm
8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers200 × 96 mm
Touchtone555
DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus
73 parts33 - 4 layers340 × 210 mm
- 2 layers152.9 × 74.9 mm
- 2 layers88.9 × 50.8 mm
SynthCard
benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.
16 parts19MIT - 4 layers194.5 × 188.6 mm
MyCpu
fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.
162 parts18MIT - 2 layers145.3 × 129.9 mm
C128Diag
hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
61 parts16
Questions
What parts does the Stonehenge use?
2 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stonehenge KiCad files?
From the Moragor/PCB_Stonehenge repository on GitHub, at the commit this page was made from: the board is KiCad_files/Stonehenge/Stonehenge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stonehenge design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).