2 layers149.9 × 99.1 mm
2 layers53.3 × 69.9 mm
Octeleshield
moonpunchorg/octeleshieldOverclocking Telemetry Shield for Arduino Yún
- Size
- 53.3 × 69.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 51
- Pads
- 112
- Tracks, vias
- 191, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 Jan 2016
- Updated
- 2 Mar 2016
Overview
Octeleshield is an open-source printed circuit board by moonpunchorg, from the moonpunchorg/octeleshield repository on GitHub. It is a 2-layer board of 53.3 × 69.9 mm with 32 parts on 51 nets, routed with 191 tracks and 25 vias.
It is built around the MAX31855, MAX3378EEUD and 1N4148WS. Its parts include 11 connectors, 6 capacitors, 6 resistors, 4 diodes and 3 ICs.
Main components
3
MAX31855
UncategorisedMaxim Integrated (Analog Devices)
MAX3378EEUD
TSSOP-14-175mil-40℃~+85℃ 4 8Mbps Automatic direction detection、Output enable high-impedance Bidirectional Level translator Tri-State TSSOP-14-175mil Translators, Level ShiftersMaxim Integrated (Analog Devices)Translators, Level Shifters
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
README
README.mdOverclocking telemetry shield for Arduino Yún
Shield for overclocking telemetry, including:
- multi-channel thermocouple measurement
- multi-channel voltrage measurement
License
Released under CERN Open Hardware License 1.2.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4, C5, C6 |
| 4 | 1N4148WS | Diodes_SMD:SOD-323 | D1, D2, D3, D4 |
| 2 | 10k | Resistors_SMD:R_0603_HandSoldering | R3, R4 |
| 2 | 1k | Resistors_SMD:R_0603_HandSoldering | R1, R2 |
| 2 | 33k | Resistors_SMD:R_0603_HandSoldering | R5, R6 |
| 2 | MAX31855 | Power_Integrations:SO-8 | U2, U3 |
| 1 | ANALOG_HEADER | Pin_Headers:Pin_Header_Straight_1x06 | P2 |
| 1 | DIGITAL_HEADER_1 | Pin_Headers:Pin_Header_Straight_1x08 | P5 |
| 1 | DIGITAL_HEADER_2 | Pin_Headers:Pin_Header_Straight_1x08 | P4 |
| 1 | ICSP_HEADER | Socket_Strips:Socket_Strip_Straight_2x03 | P3 |
| 1 | LOGO | parts:epeak_logo | G*** |
| 1 | MAX3378E | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U1 |
| 1 | MOONPUNCH_LOGO | parts:moonpunch_1cm | G*** |
| 1 | POWER_HEADER | Pin_Headers:Pin_Header_Straight_1x08 | P1 |
| 1 | THERMOCOUPLE1/D3 | parts:Thermocouple | P10 |
| 1 | THERMOCOUPLE2/D4 | parts:Thermocouple | P11 |
| 1 | V_PROBE1_GND | parts:Test_Probe | P7 |
| 1 | V_PROBE1_SIG | parts:Test_Probe | P6 |
| 1 | V_PROBE2_GND | parts:Test_Probe | P9 |
| 1 | V_PROBE2_SIG | parts:Test_Probe | P8 |
Questions
How big is the Octeleshield PCB?
It measures 53.3 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Octeleshield use?
32 parts, built around the MAX31855, MAX3378EEUD and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Octeleshield KiCad files?
From the moonpunchorg/octeleshield repository on GitHub, at the commit this page was made from: the board is octeleshield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Octeleshield design in my own project?
Its repository states no licence, so its author keeps all rights: ask moonpunchorg before reusing the design.
Similar boards
- 2 layers25.5 × 27.9 mm
Microduino OPC DE
r-map/rmap
rete monitoraggio ambientale partecipativo documentation at https://doc.rmap.cc
10 parts55 - 2 layers140 × 190 mm
- 2 layers65 × 56 mm
- 2 layers100 × 100 mm
Reflow
windsorschmidt/reflow
Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.
95 parts4MIT - 2 layers31 × 26.4 mm
- 2 layers140.5 × 106 mm
Pcbgalapagos
catuta0/HAB-payload
Carrier PCB for a high-altitude balloon payload. An ESP32 DevKitC V4 (WROOM-32) plugs into the board together with breakout modules for GPS (NEO-8M, I2C or UART header, fit only one), INA260 power monitor, BME280…
62 parts - 2 layers81 × 98 mm
REFLOW OVEN V2
Charading/NETTA-Reflow-Oven-Conversion
I converted my NETTA Mini Oven 20L into a reflow oven.
74 parts