2 layers152.4 × 101.6 mm
8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0
2 layers110.1 × 101.6 mm
Nano8088
monotech/Nano808817Smaller SMD version of Sergey Kiselev's Micro 8088 SBC, with XT-CF added
- Size
- 110.1 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 159
- Pads
- 768
- Tracks, vias
- 3,169, 255
- Pours
- 36
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Jun 2019
- Updated
- 6 Jun 2019
Overview
Nano8088 is an open-source printed circuit board by monotech, from the monotech/Nano8088 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 110.1 × 101.6 mm with 78 parts on 159 nets, routed with 3,169 tracks and 255 vias.
It is built around the PIC12F629-I/P, 74F245D and 74F573D, with the 74F244D, 74LS04PC and 74LS32SC among its other parts. Its parts include 23 capacitors, 18 ICs, 12 resistors, 5 connectors and 3 diodes. It belongs with the computers and single-board computers boards and the FPGA and CPLD and PIC boards of this library.
Main components
6
PIC12F629-I/P
DIP-8-40℃~+85℃ 1.75KB 128Byte 20MHz 2V~5.5V 5 64Byte 8 Bit Built-in FLASH PIC DIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
74F245D
SOIC-20-300mil0℃~+70℃ 15mA 4.5V~5.5V 4ns@5V,50pF 64mA 74F Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNXP SemiconductorsBuffers, Drivers, Receivers, Transceivers74F573D
SOIC-20-300milSOIC-20-300mil Specialty Logic ROHSPhilips SemiconsSpecialty Logic74F244D
SOIC-20-300milSOIC-20-300mil Specialty Logic ROHSPhilips SemiconsSpecialty Logic
74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters
74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic Gates
README
README.mdNano 8088 Rev1.1 ReadMe
8088 SBC based on Sergey Kiselev's Micro 8088 here: https://github.com/skiselev/micro_8088
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6, C7, C8, C10, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +1 |
| 3 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10, R11 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C25, C26 |
| 3 | 74F573 | Custom:SOIC-20W_7.5x12.8mm_P1.27mm | U7, U9, U10 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R12 |
| 2 | 4.7K | Resistor_THT:R_Array_SIP9 | RN1, RN5 |
| 2 | 47 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R6, R7 |
| 2 | 74F244 | Custom:SOIC-20W_7.5x12.8mm_P1.27mm | U13, U18 |
| 2 | 74F245 | Custom:SOIC-20W_7.5x12.8mm_P1.27mm | U2, U12 |
| 2 | AS6C4008 | Custom:SSOP-32_11.305x20.495mm_P1.27mm | U16, U17 |
| 2 | HOLE | MountingHole:MountingHole_3mm | HOLE1, HOLE2 |
| 1 | 1.1A | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | F1 |
| 1 | 10K | Resistor_THT:R_Array_SIP8 | RN2 |
| 1 | 10K | Resistor_SMD:R_Array_Convex_4x1206 | RN3 |
| 1 | 10nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C3 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 1K | Resistor_SMD:R_Array_Convex_4x1206 | RN6 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 1N4148 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D2 |
| 1 | 28.63636MHz | Crystal:Crystal_HC49-4H_Vertical | X1 |
| 1 | 33 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R3 |
| 1 | 4.7K | Resistor_SMD:R_Array_Convex_4x1206 | RN4 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | 47pF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 5-30pF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 1 | 5.6K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R8 |
| 1 | 74LS04 | Custom:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | 74LS32 | Custom:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | 74LS688 | Custom:SOIC-20W_7.5x12.8mm_P1.27mm | U6 |
| 1 | 8087 | Package_DIP:DIP-40_W15.24mm_Socket | U4 |
| 1 | 8088 | Package_DIP:DIP-40_W15.24mm_Socket | U5 |
| 1 | ATF16V8B | Package_DIP:DIP-20_W7.62mm_Socket | U11 |
| 1 | BUSPC_HOST | Custom:Conn_Edge_PCB_ISA8_Micro8088 | BUS1 |
| 1 | CF Activity | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | P5 |
| 1 | CF Activity | LED_THT:LED_D3.0mm | D3 |
| 1 | CF_CARD | Custom:CF_Slot_3M_N7E50-7516TS0884 | P3 |
| 1 | FE2010A | Package_LCC:PLCC-84_THT-Socket | U8 |
| 1 | LOGO | Custom:Monotech Logo 18mm | LOGO1 |
| 1 | PIC12F629 | Package_DIP:DIP-8_W7.62mm_Socket | U14 |
| 1 | PN2222A EBC | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | PS/2 Keyboard | Custom:Conn_Mini_DIN_6pin | P4 |
| 1 | Power | LED_THT:LED_D3.0mm | D1 |
| 1 | Reset | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | P2 |
| 1 | Reset | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW3 |
| 1 | SST39SF010A | Package_DIP:DIP-32_W15.24mm_Socket | U15 |
| 1 | Speaker | Custom KiCad Library:PinHeader_1x04_3Loaded_P2.54mm_Horizontal | P1 |
| 1 | Speaker | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | SP1 |
| 1 | System Config | Button_Switch_THT:SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm | SW1 |
| 1 | UMB Config | Button_Switch_THT:SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm | SW2 |
Questions
How big is the Nano8088 PCB?
It measures 110.1 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nano8088 use?
78 parts, built around the PIC12F629-I/P, 74F245D, 74F573D and 74F244D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nano8088 KiCad files?
From the monotech/Nano8088 repository on GitHub, at the commit this page was made from: the board is Nano 8088.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nano8088 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers184.9 × 243.8 mm
Project NuXT
monotech/NuXT
MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial
223 parts121GPL-3.0 - 2 layers416.8 × 346.1 mm
- 2 layers416.3 × 345.8 mm
Rhaamo kicad amiga2000 amiga2000
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
558 parts1 - 4 layers254 × 134.6 mm
Z280-S100
cm68/Z280-S100
16-bit Zilog Z280 CPU card for the IEEE-696 S-100 backplane; glue logic in two ATF1508AS CPLDs
61 parts1CERN-OHL-P-2.0 - 6 layers304.8 × 243.8 mm
- 2 layers
CompaqportableIII
raymondh2/CompaqPortableIII
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.
123 parts17 - 4 layers204 × 244 mm
Aries-1
computerguy096/Aries-1
This is a work in progress micro-ATX 486 board, based off of the DTK 386 replica and the Prometheus VLB
381 parts3GPL-3.0