2 layers285 × 94.6 mm
2 layers285 × 94.6 mm
Voyager
monksoffunk/Voyager1Voyager 60% Keyboard PCB
- Size
- 285 × 94.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 258
- Nets
- 181
- Pads
- 1,173
- Tracks, vias
- 3,472, 121
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Jun 2018
- Updated
- 6 Dec 2017
Overview
Voyager is an open-source printed circuit board by monksoffunk, from the monksoffunk/Voyager repository on GitHub. It is a 2-layer board of 285 × 94.6 mm with 258 parts on 181 nets, routed with 3,472 tracks and 121 vias.
It is built around the ATMEGA32U2-AU, WS2812B and NSS40301MZ4T1G. Its parts include 20 capacitors, 5 resistors, 1 IC, 1 transistor and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA32U2-AU
TQFP-32(7x7)-40℃~+85℃ 16MHz 1KB 1KB 2.7V~5.5V 22 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
NSS40301MZ4T1G
SOT-223-55℃~+150℃ 1 NPN 100nA 215MHz 220 2W 3A 40V 6V NPN SOT-223 Bipolar (BJT) ROHSonsemiBipolar (BJT)
README
README.mdVoyager
Voyager 60% Keyboard PCB
A simple MX/Alps 60% board that just works. Revision 2.0 released 2017-10-30. Revision 2.x overrides the 1.x branch.
Layouts:
- ANSI/ISO with arrow keys main
- AEK-II Alps secondary
Keyboard Layout Editor layout: http://tinyurl.com/ai03-voyager
Features
- ANSI/ISO enter/shift, split/unified backspace
- Optional LED backlighting
- Optional RGB underglow
- Recommended layout firmware available for a quick "build and use" solution
- Follows good practices for circuitry design for a stable, reliable result
- Fuse prevents mistakes in assembly from blowing up a computer (hopefully)
Things required for assembly of a full keyboard
- 65 switches, or less depending on layout
- Case, keycaps, cable, stabilizers, plate
- The PCB itself
- Soldering iron, solder, flux
- Desoldering wick/solder sucker for mistakes
- Soldering skill for surface-mount devices
- Parts in the parts list, and optional parts lists
The parts list
- 2 22pf 0805 capacitors
- 1 1uF 0805 capacitors
- 2 0.1uF 0805 capacitors
- 1 4.7uF 0805 capacitors
- 65 SOD-323 diodes
- 1 PTC Fuse, 500mA hold current, 1206
- 2 10k ohm 0805 resistors
- 2 22 ohm 0805 resistors
- 1 1.5k ohm 0805 resistors
- 1 6x6mm through-hole push button
- 1 ATMega32u2 - TQFP housing (NOT QFN)
- 1 Molex-0548190589 Mini-USB connector
- 1 16MHz 3.2x2.5mm crystal
Optional per-key LED lighting:
- 65 LEDs - 2x3x4mm or 1.8mm
- 65 2.2-3.3k ohm 0805 resistors (2.7k recommended)
- 1 SOT-223 NPN Transistor (NSS40301MZ4T1G recommended)
Optional RGB underglow:
- 14 WS2812B RGB LEDs (4-pin)
- 14 0.1uF 0805 capacitors
Parts
258| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | 2.7k | Resistors_SMD:R_0805_HandSoldering | R_-1, R_,1, R_;1, R_.1, R_'1, R_/1, R_#0_1, R_#1, R_#2, R_#3, R_#4, R_#5, R_#6, R_#7, R_#8, R_#9 +50 |
| 66 | SMA-GENERIC | Diodes_SMD:D_SOD-323_HandSoldering | D_-1, D_,1, D_;1, D_.1, D_'1, D_/1, D_#0_1, D_#1, D_#2, D_#3, D_#4, D_#5, D_#6, D_#7, D_#8, D_#9 +50 |
| 57 | MX-1U | MX_Alps_Hybrid:MX-1U | K_-1, K_,1, K_;1, K_.1, K_'1, K_/2, K_#0_1, K_#1, K_#2, K_#3, K_#4, K_#5, K_#6, K_#7, K_#8, K_#9 +41 |
| 16 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C4, C5, CR1, CR2, CR3, CR4, CR5, CR6, CR7, CR8, CR9, CR10, CR11, CR12, CR13, CR14 |
| 14 | WS2812B | WS2812B:WS2812B | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8, RGB9, RGB10, RGB11, RGB12, RGB13, RGB14 |
| 5 | MX-1.25U | MX_Alps_Hybrid:MX-1.25U | K_ALT1, K_CTRL1, K_RALT1, K_SHIFT2, K_WIN1 |
| 3 | MX-1.5U | MX_Alps_Hybrid:MX-1.5U | K_\1, K_CMD1, K_TAB1 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R5 |
| 2 | 22 | Resistors_SMD:R_0805_HandSoldering | R2, R3 |
| 2 | 22p | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 2 | MX-1.25U | MX_Alps_Hybrid:MX-1.25U-FLIPPED | K_ALT2, K_CAPS2 |
| 2 | MX-1.5U | MX_Alps_Hybrid:MX-1.5U-FLIPPED | K_CTRL2, K_RCTRL2 |
| 2 | MX-1.75U | MX_Alps_Hybrid:MX-1.75U | K_/1, K_CAPS1 |
| 2 | MX-2.25U | MX_Alps_Hybrid:MX-2.25U | K_ENTER1, K_SHIFT1 |
| 1 | 1.5k | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 16MHz | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 4.7u | Capacitors_SMD:C_0805_HandSoldering | C6 |
| 1 | 500mA | Fuse_Holders_and_Fuses:Fuse_SMD1206_HandSoldering | F1 |
| 1 | ATMEGA32U2-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | MX-2.75U | MX_Alps_Hybrid:MX-2.75U-FLIPPED | K_RSHIFT2 |
| 1 | MX-2U | MX_Alps_Hybrid:MX-2U | K_BACK2 |
| 1 | MX-6.25U-FLIPPED | MX_Alps_Hybrid:MX-6.25U-ReversedStabilizers | K_SPACE1 |
| 1 | MX-6.5U | MX_Alps_Hybrid:MX-6.5U | K_SPACE2 |
| 1 | MX-ISO | MX_Alps_Hybrid:MX-ISO-Combined-ReversedStabilizers | K_ISOENTER1 |
| 1 | Molex-0548190589 | Molex-0548190589:Molex-0548190589 | USB1 |
| 1 | NSS40301MZ4T1G | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | SW_PUSH | Molex-0548190589:PushButton_6x6mm_TH | SW1 |
The 255 most common of 258 parts.
Questions
How big is the Voyager PCB?
It measures 285 × 94.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Voyager use?
258 parts, built around the ATMEGA32U2-AU, WS2812B and NSS40301MZ4T1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Voyager KiCad files?
From the monksoffunk/Voyager repository on GitHub, at the commit this page was made from: the board is Voyager.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Voyager design in my own project?
Its repository states no licence, so its author keeps all rights: ask monksoffunk before reusing the design.
Similar boards
- 2 layers120.1 × 52.3 mm
- 2 layers73 × 38.1 mm
- 2 layers76.2 × 76.2 mm
- 2 layers229 × 80 mm
- 2 layers189.9 × 71.5 mm
- 2 layers257.2 × 76.2 mm
- 2 layers50.8 × 59.5 mm
