2 layers194.3 × 79 mm
2 layers229 × 80 mm
Dizzy40
str-dst/Dizzy4012Daisy40 drop-in replacement PCB
- Size
- 229 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 90
- Pads
- 484
- Tracks, vias
- 745, 52
- Pours
- 441
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Jun 2022
- Updated
- 31 May 2023
Overview
Dizzy40 is an open-source printed circuit board by str-dst, from the str-dst/Dizzy40 repository on GitHub. It is a 2-layer board of 229 × 80 mm with 106 parts on 90 nets, routed with 745 tracks and 52 vias.
It is built around the ATMEGA32U2-AU, SRV05-4 and WS2812B. Its parts include 22 diodes, 6 capacitors, 6 resistors, 2 ICs and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA32U2-AU
TQFP-32(7x7)-40℃~+85℃ 16MHz 1KB 1KB 2.7V~5.5V 22 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)
SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdDizzy40
A simple drop-in replacement PCB for the KPR Daisy 40% with more layout options
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | MX-NoLED | MX_Only:MXOnly-1U-NoLED | MX1, MX2, MX10, MX11, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX24, MX25, MX26 +20 |
| 22 | D_Small | custom_parts:D_SOT-23_ANK_norm | D1, D2, D10, D11, D12, D14, D15, D16, D17, D18, D19, D20, D22, D23, D24, D25 +6 |
| 8 | MX-NoLED | MX_Only:MXOnly-1.25U-NoLED | MX12, MX33, MX34, MX36, MX40, MX42, MX49, MX53 |
| 8 | WS2812B | custom_parts:WS2812-2020 | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.5U-NoLED | MX48, MX55 |
| 2 | MX-NoLED | MX_Only:MXOnly-2.25U-ReversedStabilizers-NoLED | MX45, MX46 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.75U-NoLED | MX22, MX23 |
| 2 | MX-NoLED | MX_Only:MXOnly-2.75U-ReversedStabilizers-NoLED | MX44, MX47 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | ATmega32U2-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | LOGO | custom_parts:vial_logo | G*** |
| 1 | LOGO | custom_parts:kpr_logo | G*** |
| 1 | LOGO | custom_parts:elmo | G*** |
| 1 | LOGO | custom_parts:qmk | G*** |
| 1 | MX-NoLED | MX_Only:MXOnly-3U-ReversedStabilizers-NoLED | MX37 |
| 1 | MX-NoLED | MX_Only:MXOnly-2U-ReversedStabilizers-NoLED | MX39 |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | RESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | RESET |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | USB1 |
Questions
How big is the Dizzy40 PCB?
It measures 229 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dizzy40 use?
106 parts, built around the ATMEGA32U2-AU, SRV05-4 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dizzy40 KiCad files?
From the str-dst/Dizzy40 repository on GitHub, at the commit this page was made from: the board is pcb/dizzy40.kicad_pcb and its schematic pcb/dizzy40.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dizzy40 design in my own project?
Its repository states no licence, so its author keeps all rights: ask str-dst before reusing the design.
Similar boards
- 2 layers190.5 × 83.2 mm
Endeavour-2
ScatteredDrifter/Endeavour
An 38 key orthogonal Keyboard with 3d printable case
111 parts13CERN-OHL-P-2.0 - 2 layers259 × 88.3 mm
- 2 layers266.7 × 77.5 mm
- 2 layers242.9 × 89.3 mm
40-m0110
Aeonstrife/40-m0110
An OpenSource 40% PCB compatible with Ani's 40-m0110 case. Made for the Indian Mechanical Keyboard Community.
117 parts1 - 2 layers295.3 × 98.3 mm
- 2 layers120.1 × 52.3 mm
- 2 layers73 × 38.1 mm
