

Esp32-gateway hw
- Size
- 100.3 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 51
- Pads
- 292
- Tracks, vias
- 617, 11
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Oct 2017
- Updated
- 18 Oct 2017
Overview
Esp32-gateway hw is an open-source printed circuit board by monkeykingblack, from the monkeykingblack/esp32-gateway-hw repository on GitHub. It is a 2-layer board of 100.3 × 76.2 mm with 72 parts on 51 nets, routed with 617 tracks and 11 vias.
It is built around the NEO-6M, SIM800C and LM2596S-5.0, with the DMP1045U, MCP1727-3302E/SN and S8050 among its other parts. Its parts include 24 capacitors, 19 resistors, 8 diodes, 8 connectors and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
7NEO-6M
-- GNSS Modules ROHSu-bloxGNSS ModulesSIM800C
SMD,17.6x15.7mm3.4V~4.4V CMUX功能、噪声抑制功能、USSD功能 GPRS、GSM UART、GPIO、ADC、SIM card SMD,17.6x15.7mm 2G/3G/4G/5G Modules ROHSSIMCom Wireless Solutions2G/3G/4G/5G ModulesLM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersDMP1045U
SOT-23-55℃~+150℃ 1 P-Channel 1.357nF 1.3W 12V 15.8nC@4.5V 1V 235pF 31mΩ@4.5V 5.2A 504pF P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsMCP1727-3302E/SN
SOIC-8-40℃~+125℃@(Tj) 1 1.5A 120uA 3.3V 330mV@(1.5A) 60dB@(100Hz) 6V Fixed Over Current Protection、Thermal Shutdown、Operating status indication Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)SMF05C
SC-88-40℃~+125℃ 100W@8/20us 12.5V 5 5V 7.2V 70nA 80pF 8A@8/20us IEC 61000-4-2 TVS SC-88 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)
README
README.md#ESP32-GATEWAY-HARDWARE
##Features
- ESP32 WIFI, Bluetooth LE, SoC - 240MHz - Module ESP32 Wrover
- Tracking location by GPS-NEO-6M IC
- Send SMS via sim card by
- Automatic select 3 power sources (DC6-28V, USB and Battery)
- Charger battery lithium 3.7V
- 1 Power LED, 1 Status GPS LED, 1 Status GSM LED
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10uF | footprint:C_0603 | C2, C3, C8, C10, C21, C23 |
| 4 | 10k | footprint:R_0603 | R1, R2, R6, R15 |
| 3 | 10 | footprint:R_0603 | R10, R11, R14 |
| 3 | 100nF | footprint:C_0603 | C19, C22, C24 |
| 3 | 10pF | footprint:C_0603 | C12, C13, C16 |
| 3 | 33pF | footprint:C_0603 | C11, C14, C15 |
| 3 | 470 | footprint:R_0603 | R3, R4, R5 |
| 3 | 51 | footprint:R_0603 | R17, R18, R19 |
| 3 | LED | LEDs:LED_D3.0mm | D2, D4, D7 |
| 2 | 1uF | footprint:C_0603 | C7, C9 |
| 2 | 330 | footprint:R_0603 | R8, R16 |
| 2 | 4.7uF | footprint:C_0603 | C5, C6 |
| 2 | Conn_01x04 | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | J3, J4 |
| 2 | D_Schottky | Diodes_SMD:D_SOD-123 | D1, D3 |
| 2 | LEMO2 | footprint:SMA_Straight | J6, J8 |
| 2 | S8050 | footprint:SOT-23_standar | Q1, Q2 |
| 1 | 100k | footprint:R_0603 | R9 |
| 1 | 10nF | footprint:C_0603 | C18 |
| 1 | 120 | footprint:R_0603 | R13 |
| 1 | 1N4148 | Diodes_SMD:D_SOD-123 | D6 |
| 1 | 1nF | footprint:C_0603 | C17 |
| 1 | 220 | footprint:R_0603 | R7 |
| 1 | 220uF | Capacitors_SMD:CP_Elec_4x5.3 | C4 |
| 1 | 22pF | footprint:C_0603 | C20 |
| 1 | 22uH | footprint:INDUCTOR_SMD_DIP2 | L2 |
| 1 | 33uH | footprint:INDUCTOR_SMD_DIP2 | L1 |
| 1 | 4k7 | footprint:R_0603 | R12 |
| 1 | 680uF | Capacitors_SMD:CP_Elec_4x5.3 | C1 |
| 1 | Barrel_Jack | footprint:CUI-PJ-102A_dc-barrel-jack | J2 |
| 1 | Battery | Connectors_JST:JST_EH_B02B-EH-A_02x2.50mm_Straight | BT1 |
| 1 | Conn_01x05 | Socket_Strips:Socket_Strip_Straight_1x05_Pitch2.54mm | J5 |
| 1 | Conn_01x06 | Socket_Strips:Socket_Strip_Straight_1x06_Pitch2.54mm | J1 |
| 1 | DMP1045U | TO_SOT_Packages_SMD:SOT-23 | U6 |
| 1 | D_TVS | footprint:DO-214AC(SMA) | D9 |
| 1 | ESP32-WROVER-V3 | footprint:esp32-wrover-32S | U2 |
| 1 | LM2596 | TO_SOT_Packages_SMD:TO-263-5_TabPin3 | U1 |
| 1 | MCP1727-3302E/SN | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | MCP73832 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | Q3 |
| 1 | NEO-6M | footprint:GPS24P-SMD-1.1-16X12.2MM | U3 |
| 1 | SIM800C | footprint:sim800C | U5 |
| 1 | SIM_Card | footprint:MOLEX_47553-2001_SIMCARD | J7 |
| 1 | SMF05C | footprint:SC70-6L | D8 |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm_h4.3mm | SW1 |
Similar boards
- 2 layers40 × 50 mm

- 2 layers99.1 × 99.1 mm

Devboard io
mattis25/sierros_pcb
Circuit of Sierros Project (self-service device which does a resuscitation) OPEN HARDWARE
68 parts - 2 layers79.2 × 59.2 mm

- 2 layers75 × 35 mm

- 4 layers103.5 × 48.3 mm

ButtonBd2
frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.
165 parts3Apache-2.0 - 2 layers102 × 103 mm

- 2 layers320 × 136 mm

- 2 layers142.2 × 90.7 mm

Questions
How big is the Esp32-gateway hw PCB?
It measures 100.3 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32-gateway hw use?
72 parts, built around the NEO-6M, SIM800C, LM2596S-5.0 and DMP1045U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-gateway hw KiCad files?
From the monkeykingblack/esp32-gateway-hw repository on GitHub, at the commit this page was made from: the board is esp32-gateway-hw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-gateway hw design in my own project?
Its repository states no licence, so its author keeps all rights: ask monkeykingblack before reusing the design.