2 layers50.8 × 22.9 mm
Classic MIDI FeatherWing
hajdbo/Classic_MIDI_FeatherWing
A classic MIDI interface FeatherWing with provisions for DIN-5 and TRS TypeB connectors.
21 parts
2 layers299.2 × 112.1 mm
The Split 65% Keyboard - ARM Based
- Size
- 299.2 × 112.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 438
- Nets
- 298
- Pads
- 1,784
- Tracks, vias
- 6,817, 311
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Feb 2016
- Updated
- 29 Mar 2016
Overview
TS65 is an open-source printed circuit board by mohitg11, from the mohitg11/TS65ARM repository on GitHub. It is a 2-layer board of 299.2 × 112.1 mm with 438 parts on 298 nets, routed with 6,817 tracks and 311 vias.
It is built around the MK20DX256VLH7, 74HCT1G125GV and IP4234CZ6, with the WS2812B among its other parts. Its parts include 183 diodes, 110 switches, 40 capacitors, 26 resistors and 8 ICs. It belongs with the keyboards and input boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
4
MK20DX256VLH7
LQFP-64(10x10)12bit 16bit 256KB 288KB 40 72MHz ARM Cortex-M4 FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Built-in general-purpose timer、Hardware CRC、Calendar function、Touch function、Software watchdog LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)
74HCT1G125GV
SOT-753-40℃~+125℃ 1 1 11ns@4.5V,50pF 20uA 4.5V~5.5V 6mA 6mA 74HCT Tri-State Unidirectional SOT-753 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
IP4234CZ6
TSOP-6-40℃~+85℃@(Ta) 100W 100nA 3.1pF 5.5V 6V ESD Four channels IEC 61000-4-2、IEC 61000-4-5 TSOP-6 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdTS65 - ARM Based
The Split 65% Keyboard - ARM Based
This is a custom 65% style keyboard that is split in the middle to provide a more ergonomic option whilest not being drastically different from the standard stagger used on keyboards
#Features
- Open Source Design
- Fully Programmable Keys
- Split design for better ergonomics, while maintaining the currently "standard" keyboard layout
- PCBs and case designed so that the two sides can be connected into standard 65% without split
- Infinite layers
- Alps & Cherry (PCB and Plate) switches supported
- PCB mount stabs supported
- All keys individually lit. LED on top to maintain compatibility with the few backlit keysets out there
- 18 RGB SMD LEDs on the bottom of the PCB for under/side glow
- 3 indicator LEDs
- Individual resistors for the LEDs not required as it uses a dedicated LED driver
- Either side (Left or right) can be connected to the PC
- USB 3.0 Type A and USB Type C are used.
- Using larger (0805) capacitors and resistors so it is easy to hand-solder
- SMD (SOD-123) diodes only
#Layout options
- Split backspace
- Split left shift
- ISO support
- Off-center capslock
- 2.75 and 1.75 right shift
- Lots of options for bottom row
In the below image you can see the different options available, the top four rows represent the four rows of th keyboard and the options for the final keyboard row is represented by the remaining rows in the image.
Parts
438| Qty | Value | Footprint | References |
|---|---|---|---|
| 110 | LED | prettylib:INSW_LEDS_REG | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED19_2, LED20, LED21, LED22 +94 |
| 110 | SW | prettylib:MXALPS2 | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S19_2, S20, S21, S22 +94 |
| 73 | DIODE | prettylib:SOD123-DIODE | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +57 |
| 18 | 0.1 uF | prettylib:SMD_0805 | C10, C11, C12, C13, C14, C15, C16, C17, CR10, CR11, CR12, CR13, CR14, CR15, CR16, CR17 +2 |
| 18 | WS2812B | prettylib:WS2812B | LEDG1, LEDG2, LEDG3, LEDG4, LEDG5, LEDG6, LEDG7, LEDG8, LEDGR1, LEDGR2, LEDGR3, LEDGR4, LEDGR5, LEDGR6, LEDGR7, LEDGR10 +2 |
| 12 | 0.1uF | prettylib:SMD_0805 | C4, C5, C6, C7, C8, C18, CR4, CR5, CR6, CR7, CR8, CR20 |
| 12 | MISC | prettylib:MX_200 | STAB1, STAB2, STAB3, STAB4, STAB5, STABR1, STABR2, STABR3, STABR4, STABR5, STABR6, STABR7 |
| 10 | MISC | prettylib:FID | FID1, FID2, FID3, FID4, FIDR1, FIDR2, FIDR3, FIDR4, HOLE1, HOLER1 |
| 6 | 1uF | prettylib:SMD_0805 | C1, C2, C3, CR1, CR2, CR3 |
| 6 | 4.7k | prettylib:SMD_0805 | R3, R4, R5, RR3, RR4, RR5 |
| 4 | 100 | prettylib:SMD_0805 | R6, R7, RR6, RR7 |
| 4 | 33 | prettylib:SMD_0805 | R1, R2, RR1, RR2 |
| 4 | 5.1k | prettylib:SMD_0805 | R9, R10, RR9, RR10 |
| 4 | MISC | prettylib:OSHW | LOGO3, LOGO4, LOGOR3, LOGOR4 |
| 4 | MISC | prettylib:TS65-LOGO | LOGO1, LOGO2, LOGOR1, LOGOR2 |
| 3 | LED | prettylib:LED-3MM | LEDI1, LEDI2, LEDI3 |
| 2 | 0.22uF | prettylib:SMD_0805 | C9, CR9 |
| 2 | 100k | prettylib:SMD_0805 | R8, RR8 |
| 2 | 10uF | prettylib:SMD_0805 | C19, CR21 |
| 2 | 1k | prettylib:SMD_0805 | R11, RR11 |
| 2 | 20k | prettylib:SMD_0805 | R12, RR12 |
| 2 | 3.3V REG IC | prettylib:SOT-223 | Q1, QR1 |
| 2 | 330 | prettylib:SMD_0805 | R13, RR13 |
| 2 | 74HCT1G125 | prettylib:SOT-753 | U3, UR3 |
| 2 | CONN_15 | prettylib:HEADER_1x15 | P3, PR3 |
| 2 | CRYSTAL | prettylib:NX3225SA | X1, XR1 |
| 2 | FLASH_HDR | prettylib:JLINK_NEEDLE | P4, PR4 |
| 2 | IP4234CZ6 | prettylib:SOT457 | U4, UR4 |
| 2 | IS31FL3731 | prettylib:SSOP-28 | U2, UR2 |
| 2 | LED | prettylib:LED_0805 | LEDD1, LEDDR1 |
| 2 | MISC | prettylib:BreakHoles | BREAKHOLES1, BREAKHOLES2 |
| 2 | MK20DX256VLH7 | prettylib:LQFP64 | U1, UR1 |
| 2 | PTC FUSE | prettylib:Fuse_SMD1206_HandSoldering | F1, FR1 |
| 2 | TAC_SWITCH | prettylib:TACT_5.2x5.2 | SRL1, SRR1 |
| 2 | USB3_AFEMALE | prettylib:USB3_AFEMALE_MOD | P2, PR2 |
| 2 | USB_TYPE_C | prettylib:USB_TYPE_C_HYBRID | P1, PR1 |
Questions
How big is the TS65 PCB?
It measures 299.2 × 112.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TS65 use?
438 parts, built around the MK20DX256VLH7, 74HCT1G125GV, IP4234CZ6 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TS65 KiCad files?
From the mohitg11/TS65ARM repository on GitHub, at the commit this page was made from: the board is PCB/TS65.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TS65 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mohitg11 before reusing the design.
Similar boards
- 2 layers38.1 × 22.9 mm
- 2 layers35.6 × 17.8 mm
Adafruit adafruit itsybitsy m0 pcb adafruit itsybitsy m0
oomlout/oomlout_oomp_project_bot_v_2
28 parts - 2 layers11.4 × 98.4 mm
- 2 layers73.2 × 116 mm
SAMPad
jaredhumphreys3141/MECHANICAL-NUMPAD-PCB
This is a custom numeric pad that is designed to be usable on the right side of the keyboard or on the left (With a mirrored layout if required). There is a gap in the top row and the second row of 1.25U.
154 parts - 4 layers285 × 94.6 mm
Project Aurora
Project-Aurora/Project-Aurora
An Attempt at making an Open Source Fully RGB Backlit 60% Keyboard
275 parts37GPL-2.0 - 2 layers264 × 34 mm
- 4 layers100 × 54 mm
