

Design files
My design files. Abandon all hope ye who enter here.
- Size
- 38.1 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 46
- Pads
- 142
- Tracks, vias
- 380, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2017
- Updated
- 13 Dec 2022
Overview
Design files is an open-source printed circuit board by aspro648, from the aspro648/KiCad repository on GitHub. It is a 2-layer board of 38.1 × 22.9 mm with 27 parts on 46 nets, routed with 380 tracks and 19 vias.
It is built around the ATMEGA32U4-AU, 74HCT1G125GV and MIC5225-3.3YM5, with the MBR120 among its other parts. Its parts include 6 resistors, 5 diodes, 4 capacitors, 3 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)74HCT1G125GV
SOT-753-40℃~+125℃ 1 1 11ns@4.5V,50pF 20uA 4.5V~5.5V 6mA 6mA 74HCT Tri-State Unidirectional SOT-753 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversMIC5225-3.3YM5
SOT23-53.3V 150mA Ultra-Low Current uCap Low Dropout RegulatorMicrochip TechnologyUncategorisedMBR120
SOD-123Schottky DiodesDoeshare
README
README.mdKiCad
My design files. Abandon all hope ye who enter here.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10uF | Capacitors_SMD:C_0805 | C6, C8, C9 |
| 3 | 180 | Resistors_SMD:R_0603 | R1, R2, R7 |
| 2 | 22 | Resistors_SMD:R_0603 | R4, R5 |
| 2 | Conn_01x14 | Pin_Headers:Pin_Header_Straight_1x14_Pitch2.54mm | J2, J4 |
| 2 | MBR120 | Diodes_SMD:D_SOD-123F | D1, D4 |
| 1 | 100K | Resistors_SMD:R_0603 | R9 |
| 1 | 1uF | Capacitors_SMD:C_0603 | C7 |
| 1 | 74HCT1G125 | Housings_SSOP:TSOP-5_1.65x3.05mm_Pitch0.95mm | U3 |
| 1 | 8 Mhz | footprints:Resonator_SMD_CTSC_1.3mmx3.2mm | Y1 |
| 1 | ATMEGA32U4-AU | Housings_QFP:TQFP-44_10x10mm_Pitch0.8mm | U1 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | D13 | LEDs:LED_0603 | D2 |
| 1 | D4 | Buttons_Switches_SMD:SW_SPST_KMR2 | SW2 |
| 1 | MB225rev | myFootPrints:MB225rev | VAL |
| 1 | MIC5225-3.3 | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | MadeInOregonRev25 | myFootPrints:MadeInOregonRev25 | VAL |
| 1 | RESET | Buttons_Switches_SMD:SW_SPST_KMR2 | SW1 |
| 1 | RX | LEDs:LED_0603 | D5 |
| 1 | TX | LEDs:LED_0603 | D3 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Molex-105017-0001 | X3 |
More from aspro648/KiCad
12- 2 layers86.4 × 53.3 mm

- 2 layers64 × 40 mm

- 2 layers86.4 × 53.3 mm

- 2 layers128 × 75 mm

- 2 layers128 × 75 mm

- 2 layers42 × 18 mm

- 2 layers80 × 38 mm

- 2 layers132 × 75 mm

- 2 layers42 × 18 mm

- 2 layers90 × 64 mm

- 2 layers69.8 × 12.5 mm

- 2 layers64.8 × 50.8 mm

Similar boards
- 2 layers35.6 × 17.8 mm

Adafruit adafruit itsybitsy m0 pcb adafruit itsybitsy m0
oomlout/oomlout_oomp_project_bot_v_2
28 parts - 2 layers299.2 × 112.1 mm

- 2 layers50.8 × 22.9 mm

Classic MIDI FeatherWing
hajdbo/Classic_MIDI_FeatherWing
A classic MIDI interface FeatherWing with provisions for DIN-5 and TRS TypeB connectors.
21 parts - 2 layers11.4 × 98.4 mm

- 2 layers230.1 × 77.6 mm

- 2 layers112.6 × 42.6 mm

- 2 layers71.6 × 94.2 mm

Buta board v1
azerimaker/ButaBoard
This repo contains all the necessary design and fabrication files for the ButaBoard.
81 parts - 2 layers100 × 80.7 mm

Palette1202-OB
niltea/Palette1202
Nilgiri12-02ECは、イラストレーターのための左手デバイスです。 Clip studio Paint や、 Adobe Photoshopを使用した描画を快適に行うため設計されています。 各種ショートカットを使用するためのキーを備えていることはもちろん、 つまみを操作することで、ブラシサイズの変更やキャンバスの拡大・縮小等を快適に行うことができます。
55 parts4
Questions
How big is the Design files PCB?
It measures 38.1 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design files use?
27 parts, built around the ATMEGA32U4-AU, 74HCT1G125GV, MIC5225-3.3YM5 and MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design files KiCad files?
From the aspro648/KiCad repository on GitHub, at the commit this page was made from: the board is projects/32u4/design_files/project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design files design in my own project?
Its repository states no licence, so its author keeps all rights: ask aspro648 before reusing the design.