2 layers30.5 × 53.9 mm
EdisonBlock 915MHz
EnhancedRadioDevices/915MHzEdisonExplorer
A 915MHz block for the Intel Edison.
117 parts26
2 layers30.5 × 44.4 mm
EdisonBlockTemplate
mogar/EdisonBlockTemplateA KiCAD template for an Intel Edison Block (works with SparkFun block form factor)
- Size
- 30.5 × 44.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 64
- Pads
- 192
- Tracks, vias
- 500, 60
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Sep 2016
- Updated
- 21 Sep 2016
Overview
EdisonBlockTemplate is an open-source printed circuit board by mogar, from the mogar/EdisonBlockTemplate repository on GitHub. It is a 2-layer board of 30.5 × 44.4 mm with 17 parts on 64 nets, routed with 500 tracks and 60 vias.
It is built around the FT234XD-R and AP7365. Its parts include 4 capacitors, 4 ICs, 2 resistors and 1 connector.
Main components
2README
README.mdThese are the hardware design files for a template Intel Edison Block. The Block form factor will work with the SparkFun Edison Blocks.
This template shows how you might implement your own Edison Block hardware, and includes a USB-serial converter in the schematic. The block itself is incomplete (layout still required). Add whatever functionality you want to the board.
KiCAD libraries
See also this repo for example code:
These hardware files were created with KiCAD. You may need the KiCAD libraries available here: https://github.com/mogar/KiCAD_libs When opening these projects in KiCAD, you may need to change the path to the libraries from the above link. This can be done in preferences->libraries in both the schematic editor and the layout editor. Make sure the libraries noted there point to wherever you put the above KiCAD_libs repo.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | CONN_01X01 | Mounting_Holes:MountingHole_2.5mm | MH1, MH2, P2, P3, P4, P5 |
| 2 | 0.1u | Capacitors_SMD:C_0402 | C19, C20 |
| 2 | 100 | Resistors_SMD:R_0603 | R16, R17 |
| 2 | 4.7u | Capacitors_SMD:C_0603 | C15, C16 |
| 1 | AP7365 | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | EdisonConnector | mogar_modules_new:DF40C-70DP-0.4V(51) | U2 |
| 1 | EdisonConnector | mogar_modules_new:DF40HC(3.0)-70DS | U1 |
| 1 | FT234XD | Housings_DFN_QFN:DFN-12-1EP_3x3mm_Pitch0.45mm | U10 |
| 1 | USB | Connect:USB_Micro-B | P7 |
Questions
How big is the EdisonBlockTemplate PCB?
It measures 30.5 × 44.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EdisonBlockTemplate use?
17 parts, built around the FT234XD-R and AP7365. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EdisonBlockTemplate KiCad files?
From the mogar/EdisonBlockTemplate repository on GitHub, at the commit this page was made from: the board is EdisonBlock_Template.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EdisonBlockTemplate design in my own project?
Its repository states no licence, so its author keeps all rights: ask mogar before reusing the design.
Similar boards
- 2 layers26.5 × 26.8 mm
- 4 layers90 × 44.8 mm
- 2 layers17.8 × 22.9 mm
ATTinyX12
vul-os/sirboard
Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.
27 parts56Apache-2.0 - 4 layers58.1 × 64.2 mm
- 4 layers128.5 × 40 mm
Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
146 parts152Apache-2.0 - 4 layers172.7 × 135.9 mm
- 4 layers150 × 50 mm
