Moddingear/IRRemoteA programmable infrared remote, made to be cheap
IRRemote is an open-source printed circuit board by Moddingear, from the Moddingear/IRRemote repository on GitHub. It is a 2-layer board of 28 × 50.2 mm with 28 parts on 53 nets, routed with 123 tracks and 27 vias.
It is built around the AMS1117-3.3, KT-0603R and TS-1187A-B-A-B, with the CL31A107MQHNNNE and 918-418K2024S40006 among its other parts. Its parts include 11 resistors, 5 diodes, 4 switches, 2 capacitors and 2 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0603WAF2200T5E | Resistor_SMD:R_0603_1608Metric | R8, R9, R10, R11 |
| 4 | KT-0603R | LED_SMD:LED_0603_1608Metric | D2, D3, D4, D5 |
| 4 | TS-1187A | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2, SW3, SW4 |
| 2 | 0603WAF5101T5E | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | CL31A107MQHNNNE | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 1 | 0603WAF1000T5E | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 0603WAF1001T5E | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 0603WAF1002T5E | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 0603WAF4702T5E | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 918-418K2024S40006 | usb:313 | J3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | LED | LED_THT:LED_D5.0mm_Clear | D1 |
| 1 | MMBT2222A 1P | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | R_Photo | OptoDevice:R_LDR_4.9x4.2mm_P2.54mm_Vertical | R3 |
| 1 | STM32F030C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
It measures 28 × 50.2 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the AMS1117-3.3, KT-0603R, TS-1187A-B-A-B and CL31A107MQHNNNE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Moddingear/IRRemote repository on GitHub, at the commit this page was made from: the board is kicad/irremote.kicad_pcb and its schematic kicad/irremote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Moddingear before reusing the design.
JoeMighty/opentouch-s3
A modern remake of the Bare Conductive Touch Board: 12 capacitive touch electrodes, MP3/WAV/MIDI audio, and now WiFi, Bluetooth LE, USB-C, a proper LiPo power path, a fuel gauge, line-in, MIDI out, Qwiic and an RGB LED.
elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)
jarrod89/pocketPSU
Input1: - Output1 can be used to supply pocketPSU via a battery - Optional battery charging capability (addon board with BMS)
AlphaCassiopeiae/8800
Firmware and PCBs for aCassiopeiae, a minature Altair 8800 clone
Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)