2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers95.9 × 101.6 mm
PikaGlow
Moaz-Eid13/PikaGlow- Size
- 95.9 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 8
- Pads
- 23
- Tracks, vias
- 46, 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Jun 2025
- Updated
- 29 Jun 2025
Overview
PikaGlow is an open-source printed circuit board by Moaz-Eid13, from the Moaz-Eid13/PikaGlow repository on GitHub, published under the MIT licence. It is a 2-layer board of 95.9 × 101.6 mm with 10 parts on 8 nets, routed with 46 tracks and 1 via.
Its parts include 4 resistors, 2 diodes, 1 capacitor and 1 transistor.
README
README.mdPikaGlow
This is a design for a PCB that resembbles Pikachu the Beloved mascot of the Pokemon Franchise. As pikachu controllos electricity he will help in dark places and Light the way for you.
This Pcb utalizes an LDR to detect ambient ligt which will make two LEDs light in the dark and Turn off in the light.
| Item No. | Part Name | Quantity |
|---|---|---|
| 1 | Resistor 220Ω | 2 |
| 2 | Capacitor 10uF | 1 |
| 3 | CR2032 battery cell | 1 |
| 4 | Red 5mm LED | 2 |
| 5 | photoresistor | 1 |
| 6 | Resistor 47kΩ | 1 |
| 7 | 2N3904 transistor | 1 |
My Slack user name is Moaz Eid
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R4 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | C | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | NPN | Package_TO_SOT_THT:TO-92L_HandSolder | Q1 |
| 1 | R_Photo | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R2 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |
Questions
How big is the PikaGlow PCB?
It measures 95.9 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PikaGlow use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PikaGlow KiCad files?
From the Moaz-Eid13/PikaGlow repository on GitHub, at the commit this page was made from: the board is SCH/PikaGlow.kicad_pcb and its schematic SCH/PikaGlow.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PikaGlow design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0