Skip to the content
2 layers71.1 × 82.8 mmKeyBoard PCB, the printed circuit board in 3D

Repository for my custom hackpad + pcb

Size
71.1 × 82.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
25
Pads
99
Tracks, vias
72, 3
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Dec 2025
Updated
12 Jan 2026

Overview

KeyBoard PCB is an open-source printed circuit board by mmchoc, from the mmchoc/HackPad-Repository-MCHOC repository on GitHub. It is a 2-layer board of 71.1 × 82.8 mm with 21 parts on 25 nets, routed with 72 tracks and 3 vias.

It is built around the 1N4148WT and SK6812MINI-E. Its parts include 11 diodes, 9 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Main components

2

README

README.md

SideDuck Macropad

SideDuck is a 9 key macropad that utilizes KMK firmware and a keyboard matrix circuit. This macropad includes 2 SK6812 MINI-E LEDs as well as customizable LED features including a reactive ripple effect.

It serves as an extension to my 60% keyboard providing my setup with individual arrow keys as well as a delete key

Features

  • 2 SK6812 MINI-E LEDs
  • Breathe and Reactive LED feature
  • Home Key as the Layer-Tap Key
  • 9 Keys

CAD Model

2-Piece case that fits together utilizing 4 M3 Bolts and heatset inserts.

Screenshot 2025-12-19 175734

The case model was made in Fusion360

PCB

This is my PCB that utilizes a matrix circuit to reduce the amount of ports tied to each switch. Every switch organized in rows and columns with their respective diodes and connected to the XIAO RP2040 respectively.

This is my Schematic

Screenshot 2025-12-19 174946

This is my PCB

Screenshot 2025-12-19 175013

Firmware Overview

This macropad uses KMK firmware for everything

  • The home key acts as a Layer-Tap Key
  • LED choices of Off, Reactive, and Breathe mode

BOM:

  • 9x Cherry MX Switches
  • 9x Blank DSA Keycaps
  • 4x M3x5x4 Heatset inserts
  • 4x M3x16mm SHCS Bolts
  • 9x 1N4148 DO-35 Diodes
  • 2x SK6812 MINI-E LEDs
  • 1x XIAO RP2040
  • 1x Case (Two 3D printed parts)

Parts

21
QtyValueFootprintReferences
91N4148WTDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD3, D4, D5, D6, D7, D8, D9, D10, D11
9SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9
2SK6812MINILED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mmD1, D2
1XIAO-RP2040-DIPSeeed Studio XIAO Series Library:XIAO-RP2040-DIPU1

Similar boards

  • 2 layers96 × 74 mmMacroController, the printed circuit board in 3D

    MacroController

    alex1klimovich/nrf52840-macro-controller

    Custom nRF52840 productivity controller for digital artists — PCB, BLE/USB firmware, OLED, haptics, RGB, and enclosure CAD.

    78 parts1
  • 2 layers88.7 × 85.7 mmHackpad, the printed circuit board in 3D

    Hackpad

    Ckacha/Hackpad

    Hackpad for blueprint!

    25 parts1
  • 2 layers84.7 × 83.8 mmHackpad, the printed circuit board in 3D

    Hackpad

    Flaryiest/UwU-Pad

    25 parts1
  • 2 layers113 × 86 mmMacroPad, the printed circuit board in 3D

    MacroPad

    Shuri-101/MacroPad

    Macro Pad for use in CAD and general productivity + convenience, mainly for use in CAD...

    57 parts1
  • 2 layers340.8 × 100 mmTap65, the printed circuit board in 3D

    Tap65

    sudo-apt-install-tap/Tap65

    A simple 68 key based layout!

    224 parts1
  • 2 layers99.9 × 87.3 mmHackpad, the printed circuit board in 3D

    Hackpad

    Abluebowobble/macropad-hackclub

    The heatset inserts would be placed in all the holds to keep the case together and keep the pcb board in place! I have items poking out both the front side and the backside, so I'll need to be careful about that when…

    48 parts
  • 2 layers100 × 100 mmHackpad, the printed circuit board in 3D

    Hackpad

    anshxlm/hackpad

    This is my hackpad! It has 8 backlit keys, a dial, an OLED, and a status LED.

    29 parts
  • 2 layers79 × 99.4 mmHackpad, the printed circuit board in 3D

    Hackpad

    Anycircle11139s/12-key-hackpad

    This is my PCB design, after creating the schematic, I imported it into the pcb editor and arranged the parts, which was pretty easy.

    42 parts

Questions

How big is the KeyBoard PCB PCB?

It measures 71.1 × 82.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KeyBoard PCB use?

21 parts, built around the 1N4148WT and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KeyBoard PCB KiCad files?

From the mmchoc/HackPad-Repository-MCHOC repository on GitHub, at the commit this page was made from: the board is KeyBoard PCB.kicad_pcb and its schematic KeyBoard PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the KeyBoard PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask mmchoc before reusing the design.