
RemoteHF
mlanagan/RemoteHF
Remote HF PCB and Node Red Website for WFView, SteppIRAntenna and Yeasu Rotator

Remote HF PCB and Node Red Website for WFView, SteppIRAntenna and Yeasu Rotator
PowerSupply is an open-source printed circuit board by mlanagan, from the mlanagan/RemoteHF repository on GitHub. It is a 2-layer board of 143.3 × 68.8 mm with 24 parts on 16 nets, routed with 91 tracks and 2 vias.
It is built around the L7805, L7812 and GBU808, with the TIP42C among its other parts. Its parts include 7 capacitors, 4 diodes, 3 resistors, 2 ICs and 2 connectors. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1000u | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C1, C5 |
| 2 | 10u | Capacitor_SMD:CP_Elec_5x5.7 | C3, C7 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 2 | 220n Tant | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C2, C6 |
| 2 | GBU808 | Diode_THT:Diode_Bridge_Vishay_GBU | D2, D4 |
| 1 | 100n X2 | Capacitor_THT:C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3 | C4 |
| 1 | 12V OK | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | 240VAC | Connector_Molex:Molex_KK-396_5273-03A_1x03_P3.96mm_Vertical | J2 |
| 1 | 3.3R 1W | Resistor_SMD:R_2512_6332Metric | R2 |
| 1 | 5V OK | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | DCOUT | LanaganV2:ScrewTermConnector 1x3 | J1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | L7812 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | PowerTran M4624 | LanaganV2:PowerTran M4624 | TR1 |
| 1 | TIP42C | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
The 20 most common of 24 parts.

mlanagan/RemoteHF
Remote HF PCB and Node Red Website for WFView, SteppIRAntenna and Yeasu Rotator

RadioThermal/RadioThermal_Soldering_OSHW
Open Source Hardware 470KHz Induction Soldering Iron

profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.


retrobuiltRyan/4x4_Rover_ESP32
1:10 scale robot Rover with ESP32 and PS4 controller. Custom PCB for multi channel motor control

IsuriWeerarathne/Smart-BioGas-System
This Project is about a microcontroller-based hardware project on automated biogas system which done as a group project.



It measures 143.3 × 68.8 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the L7805, L7812, GBU808 and TIP42C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mlanagan/RemoteHF repository on GitHub, at the commit this page was made from: the board is PowerSupply/PowerSupply.kicad_pcb and its schematic KicadPCB-AZEL/Antenna Switching.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mlanagan before reusing the design.