Skip to the content
2 layers227.4 × 83.3 mmDisorder30, the printed circuit board in 3D

Disorder30 - meme(ish) mechanical keyboard based on pro micro.

Size
227.4 × 83.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
96
Nets
61
Pads
503
Tracks, vias
338, 10
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
10 Nov 2022
Updated
17 May 2023

Overview

Disorder30 is an open-source printed circuit board by mkylama, from the mkylama/disorder30 repository on GitHub. It is a 2-layer board of 227.4 × 83.3 mm with 96 parts on 61 nets, routed with 338 tracks and 10 vias.

Its parts include 40 switches, 39 diodes, 4 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Disorder30

ISO adaptation of dcpedits Dissatisfaction30. Includes original "75%" layout and extended "1800" layout.

Disorder30 layout

This project is made as an inside joke, so support will be limited.

Required components for pcb

ComponentDisorder30Disorder30 extended
DO-35 or SOD123 1N4148 Diodes3138-39
Pro Micro or other compatible mcu11
MX Switches30-3137-39
2u Stabilizer22-3
EC11 Encoder (optional)11
SSD1306 128x32 0.91" OLED (optional)11

Case

Very simple top mount case (untested by me). If pro micro is socketed, 5mm or lower sockets are recommended Assembly requires 10-12 countersunk 6mm M2 screws depending on pcb model.

Parts

96
QtyValueFootprintReferences
39D_Smallmigi:diode_hybridD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +23
33SW_Pushacheron_MX:MX100SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW18, SW19, SW20, SW22, SW23, SW24, SW25 +17
6MountingHolemigi:MountingHole_2.2mm_M2_DIN965_PadH1, H2, H3, H4, H5, H6
4Conn_01x03migi:PinHeader_1x03_P2.54mmJ1, J2, J3, J4
4SW_Pushacheron_MX:MX125SW21, SW31, SW32, SW34
2MountingHolemigi:MountingHole_2.2mm_M2H7, H8
1Conn_01x02migi:PinHeader_1x02_P2.54mmRST1
1LOGOmigi-art:chaosG***
1ProMicromigi:ProMicro_v4U1
1RotaryEncoder_Switchmigi:RotaryEncoder_EC11EC1
1SSD1306_OLEDmigi:OLED_v2OLED1
1SW_Pushacheron_MX:MX200RSW40
1SW_Pushacheron_MX:MX_ISOEnterSW17
1SW_Pushacheron_MX:MX275RSW33

Similar boards

  • 2 layers101.8 × 57.8 mmSc64v2, the printed circuit board in 3D

    Sc64v2

    Polprzewodnikowy/SummerCart64

    SummerCart64 - a fully open source N64 flashcart

    96 parts1.2kGPL-3.0
  • 2 layers55 × 80 mmBoard esp32, the printed circuit board in 3D

    Board esp32

    sudomesh/disaster-radio

    A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

    96 parts1.1k
  • 2 layers100.5 × 218.3 mmTraktorino, the printed circuit board in 3D

    Traktorino

    silveirago/traktorino

    The open-source DIY MIDI Controller for DJs.

    96 parts220
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 2 layers92.8 × 71.8 mmUSBSID Pico v1.0, the printed circuit board in 3D

    USBSID Pico v1.0

    LouDnl/USBSID-Pico

    USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller

    96 parts125GPL-2.0
  • 2 layers138.4 × 91.4 mmSTM32 MegaBlaster, the printed circuit board in 3D

    STM32 MegaBlaster

    AidanHockey5/STM32_VGM_Player_YM2612_SN76489

    A Sega Genesis music player based off of the STM32 BluePill board and real YM2612+SN76489 sound chips.

    96 parts117AGPL-3.0
  • 2 layers75.1 × 66.8 mmFroggyswadge, the printed circuit board in 3D

    Froggyswadge

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    96 parts114
  • 2 layers85 × 56 mmHB RF ETH, the printed circuit board in 3D

    HB RF ETH

    alexreinert/PCB

    Some of my PCBs

    96 parts104

Questions

How big is the Disorder30 PCB?

It measures 227.4 × 83.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Disorder30 use?

96 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Disorder30 KiCad files?

From the mkylama/disorder30 repository on GitHub, at the commit this page was made from: the board is pcb/disorder30.kicad_pcb and its schematic pcb/disorder30.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Disorder30 design in my own project?

Its repository states no licence, so its author keeps all rights: ask mkylama before reusing the design.