

- Size
- 87.2 × 135.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 44
- Pads
- 336
- Tracks, vias
- 603, 91
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Sep 2026
- Updated
- 15 Oct 2026
Overview
12key is an open-source printed circuit board by mknudsen404-QA, from the mknudsen404-QA/4KeyPOC repository on GitHub. It is a 2-layer board of 87.2 × 135.7 mm with 65 parts on 44 nets, routed with 603 tracks and 91 vias.
It is built around the 74LVC1G17Z, ESP32-S3-WROOM-1-N16R8 and AP2112K-3.3, with the SK6812MINI-E and USBLC6-2SC6 among its other parts. Its parts include 21 capacitors, 12 diodes, 12 switches, 7 resistors and 4 ICs. It belongs with the ESP32 boards of this library.
Main components
574LVC1G17Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.4ns@5V,15pF 74LVC Push-pull Schmitt trigger Unidirectional SOT-553 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, TransceiversESP32-S3-WROOM-1-N16R8
SMD,25.5x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C7, CL1, CL2, CL3, CL4, CL5, CL6, CL7, CL8, CL9, CL10, CL11, CL12 |
| 12 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 4 | MountingHole_2.2mm_M2 | MountingHole_2.2mm_M2 | H62, H63, H64, H65 |
| 3 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C9 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R6 |
| 2 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C6 |
| 2 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 1 | 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 74LVC1G17 | SOT-23-5 | U4 |
| 1 | AGENT1 | SW_Hotswap_Kailh_MX | SW1 |
| 1 | AGENT10 | SW_Hotswap_Kailh_MX | SW10 |
| 1 | AGENT11 | SW_Hotswap_Kailh_MX | SW11 |
| 1 | AGENT2 | SW_Hotswap_Kailh_MX | SW2 |
| 1 | AGENT3 | SW_Hotswap_Kailh_MX | SW3 |
| 1 | AGENT4 | SW_Hotswap_Kailh_MX | SW4 |
| 1 | AGENT5 | SW_Hotswap_Kailh_MX | SW5 |
| 1 | AGENT6 | SW_Hotswap_Kailh_MX | SW6 |
| 1 | AGENT7 | SW_Hotswap_Kailh_MX | SW7 |
| 1 | AGENT8 | SW_Hotswap_Kailh_MX | SW8 |
| 1 | AGENT9 | SW_Hotswap_Kailh_MX | SW9 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | BOOT | SW_Push_1P1T_NO_CK_KMR2 | SW_BOOT |
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1 | U1 |
| 1 | PTT | SW_Hotswap_Kailh_MX | SW12 |
| 1 | RESET | SW_Push_1P1T_NO_CK_KMR2 | SW_RST |
| 1 | SPARE / DEBUG | PinHeader_2x06_P2.54mm_Vertical | J2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | D_ESD |
| 1 | USB_C_Receptacle | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
| 1 | XL9555 / PCF8575 (TSSOP-24) | TSSOP-24_4.4x7.8mm_P0.65mm | U2 |
More from mknudsen404-QA/4KeyPOC
1- 2 layers87.2 × 82.6 mm

Similar boards
- 2 layers74 × 74 mm

Solartron 7075 interface konnect
cHemingway/llm_circuitgen_tests
Tests of various "circuit as code" tools
93 parts - 4 layers100 × 100 mm

- 4 layers86 × 90 mm

Sc02 drive
KVR-CIBER/sc02-solar-hypercar
SC-02 Solar Hypercar: 3D-printbare Le-Mans-racer op zonne-energie met Pi 4 + ESP32-S3, CadQuery-CAD en three.js-simulatie
94 parts - 2 layers59.5 × 108.5 mm

Data streamdeck
vcazan/open-screen-deck
Per-key LCD macro pad: 6 screen-keys, ESP32-S3, IMU / ambient light / haptics / edge glow. Open hardware, open firmware, no subscription.
71 partsMIT - 6 layers84.5 × 72.2 mm

Hub standard rev2
nathanfraske/CEC-Platform
ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").
117 partsApache-2.0 - 4 layers64 × 60 mm

Dronemagnav
ajisrawi/dronemagnav
Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.
60 parts11 - 4 layers128 × 84 mm

Dronemagnav2
ajisrawi/DroneMagNav2.0
DroneMagNav 2.0 - survey-fluxgate magnetic-anomaly navigation board for drones (IGRF-14 + EMAG2v3 continued to flight altitude)
222 parts - 2 layers94.5 × 64 mm

Air monitor
kaushalch1/air-monitor
this is a portable air quality monitoring device designed to measure particulate matter and environmental conditions in real time.
42 parts
Questions
How big is the 12key PCB?
It measures 87.2 × 135.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 12key use?
65 parts, built around the 74LVC1G17Z, ESP32-S3-WROOM-1-N16R8, AP2112K-3.3 and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 12key KiCad files?
From the mknudsen404-QA/4KeyPOC repository on GitHub, at the commit this page was made from: the board is hardware/kicad/12key/12key.kicad_pcb and its schematic hardware/kicad/12key/12key.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 12key design in my own project?
Its repository states no licence, so its author keeps all rights: ask mknudsen404-QA before reusing the design.