2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
2 layers55.6 × 63.5 mm
DMB Wemos D1 Breakout
MKme/ESP826614ESP8266 projects, firmware, PCB designs, Gerbers & ref docs
- Size
- 55.6 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 16
- Pads
- 140
- Tracks, vias
- 113, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Apr 2020
- Updated
- 30 Dec 2021
Overview
DMB Wemos D1 Breakout is an open-source printed circuit board by MKme, from the MKme/ESP8266 repository on GitHub. It is a 2-layer board of 55.6 × 63.5 mm with 89 parts on 16 nets, routed with 113 tracks and 0 vias.
It is built around the WEMOS D1 MINI. Its parts include 5 connectors and 1 IC. It belongs with the interfaces and adapters boards and the ESP8266 boards of this library.
Main components
1README
README.mdEric's ESP8266 Code & Projects
Various ESP8266 basics, functions and hardware support for incomplete projects
My notes projects and goodies for ESP prjects
🐦 Twitter
| 📺 YouTube
| 🌍 mkme.org
Support this project and become a patron on Eric's Patreon.
Website, Forum and store are at http://mkme.org
Chat with Me: Discord
Website, Forum and store are at http://mkme.org
Chat with Me: Discord
Discussion and further info I figure out (if any):
SD Card Use: http://mkme.org/forum/viewtopic.php?f=14&t=1126&p=1430#p1430
FULL Video Tutorials:
SD Card Use: https://youtu.be/y-P627KBLBw
BUY THE SUPPLIES HERE:
Buy a breakout board here: https://store.mkme.org/?product=wemos-d1-mini-dmb-breakout-pcb-with-screw-terminals-v1
Buy the D1 Mini here: https://amzn.to/34XAxhJ
SD Card Reader https://amzn.to/2XPDv6B
ESP01 https://amzn.to/2RSAvlR
LOLIN Variants https://amzn.to/2XSdjrP
0.96" OLED Display https://amzn.to/3cCHvvj
SPI SD Card to WEMOS D1 Mini
| Pin On SD Reader | Pin on D1 Mini |
|---|---|
| SCK | D5 |
| MISO | D6 |
| MOSI | D7 |
| CS | D8 |
| GND | GND |
| VCC | 3.3V ONLY! |
0.96" OLED to WEMOS D1 Mini
| Pin On OLED | Pin on D1 Mini |
|---|---|
| SDA | D2 |
| SCL | D1 |
| GND | GND |
| VCC | 3.3V or 5V (depends on display) |
Useful Stuffz
More videos and information at http://youtube.com/mkmeorg or http://www.mkme.org
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. https://creativecommons.org/licenses/by-nc/4.0/
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x08_Female | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2, J7 |
| 2 | Screw_Terminal_01x08 | TerminalBlock_RND:TerminalBlock_RND_205-00293_1x08_P5.08mm_Horizontal | J1, J9 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | SPI |
| 1 | Vin | TerminalBlock_RND:TerminalBlock_RND_205-00287_1x02_P5.08mm_Horizontal | J3 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
The 8 most common of 89 parts.
Questions
How big is the DMB Wemos D1 Breakout PCB?
It measures 55.6 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DMB Wemos D1 Breakout use?
89 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DMB Wemos D1 Breakout KiCad files?
From the MKme/ESP8266 repository on GitHub, at the commit this page was made from: the board is DMB Wemos Breakout Board/DMB Wemos D1 Breakout/DMB Wemos D1 Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DMB Wemos D1 Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask MKme before reusing the design.
Similar boards
- 2 layers37.6 × 29.3 mm
Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm
Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm
Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm
- 2 layers
