2 layers82.8 × 73.2 mm
2 layers80 × 80 mm
Supplybox
mkalte666/supplyboxsuppybox exercise
- Size
- 80 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 31
- Pads
- 121
- Tracks, vias
- 157, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Nov 2020
- Updated
- 19 Nov 2020
Overview
Supplybox is an open-source printed circuit board by mkalte666, from the mkalte666/supplybox repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 80 mm with 56 parts on 31 nets, routed with 157 tracks and 25 vias.
It is built around the MC33063AD. Its parts include 11 capacitors, 7 resistors, 5 diodes, 4 inductors and 3 ICs. It belongs with the FPGA and CPLD boards of this library.
Main components
1Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP8, TP9, TP10 |
| 4 | 100uF | Capacitor_SMD:C_Elec_6.3x7.7 | C4, C7, C8, C11 |
| 2 | 0-200 | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1, RV2 |
| 2 | 0.3 Ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5 |
| 2 | 1N5819 | Diode_SMD:D_SOD-123F | D4, D5 |
| 2 | 1uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2, L4 |
| 2 | 2.5A | ERIG_Fuse:RST_XXX | F1, F2 |
| 2 | 220 uH | Inductor_THT:L_Radial_D9.5mm_P5.00mm_Fastron_07HVP | L1, L3 |
| 2 | 3900 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R7 |
| 2 | 470pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C9 |
| 2 | 470uF | Capacitor_SMD:CP_Elec_10x10.5 | C6, C10 |
| 2 | MC33063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C1 |
| 1 | 1200 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 13V | Diode_SMD:D_SOT-23_ANK | D2 |
| 1 | 1A | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F3 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 2200 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | D_Bridge_+AA- | ERIG_Diode:KBP20XXG | D1 |
| 1 | EPM1210SJ_1212AE | ERIG_Converter_DCDC:EPMXX10SJ_XXXXAE | U1 |
| 1 | L_Core_Ferrite_Coupled_1243 | Inductor_THT:L_CommonMode_Wuerth_WE-CMB-XS | FL1 |
| 1 | Q_SCR_AGK | Package_TO_SOT_THT:TO-92_Inline_Wide | D3 |
| 1 | Thermistor_NTC | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | TH1 |
The 52 most common of 56 parts.
Questions
How big is the Supplybox PCB?
It measures 80 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Supplybox use?
56 parts, built around the MC33063AD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Supplybox KiCad files?
From the mkalte666/supplybox repository on GitHub, at the commit this page was made from: the board is supplybox/supplybox.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Supplybox design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 100 mm
MidiBox3
Dethernal/Midibox3
New features for DIN5 MIDI → Waweblaster interface board. Now with MT-32 stuff.
127 parts5MIT - 2 layers68.1 × 52.5 mm
Collector Gate System
AnotherBuildCorner/Mesh_Blast_Gates
What happens when you combine a Woodworker, and an Electrical Engineer? Sometimes the result are things like this. A Mesh controlled set of blast gates for dust collection control.
30 parts1 - 2 layers60 × 66.6 mm
- 2 layers132 × 90 mm
- 2 layers60 × 100 mm
- 2 layers87.2 × 71.3 mm
SensorBox
Lelk0e/DA_Sensorbox
Diplomarbeit 2024-2025 mit der Firma B2 electronics. Das Ziel ist es eine Sensorbox mit dem ESP32, als Basis zu entwickeln. Diese Sensorbox soll über ein Mesh-Netzwerk erweiterbar werden.
82 parts - 2 layers50 × 50 mm
Voltage Regulator seneryo Y (Input 3.7V)
manyetox/Voltage-Regulator-Examples
Educational KiCad power-supply examples demonstrating linear regulation, buck/boost conversion and current limiting, with design trade-offs and improvement notes.
43 parts