

- Size
- 60 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 122
- Pads
- 440
- Tracks, vias
- 899, 75
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Nov 2025
- Updated
- 10 Nov 2025
Overview
Dev is an open-source printed circuit board by gkhnmlym, from the gkhnmlym/STM32-Dev-Borad repository on GitHub. It is a 2-layer board of 60 × 100 mm with 99 parts on 122 nets, routed with 899 tracks and 75 vias.
It is built around the MAX485ED, MC33063AD and ESDA6V1SC6, with the LM1117-3.3 and M24C01-WMN6P among its other parts. Its parts include 34 resistors, 21 capacitors, 12 connectors, 8 ICs and 6 diodes. It belongs with the STM32 boards of this library.
Main components
5MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsMC33063AD
SOIC-8-40℃~+85℃@(TA) 1 1.5A 100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in SOIC-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersESDA6V1SC6
SOT-23-6L-40℃~+150℃ 18A@8/20us 190pF 19V 2uA 400W@8/20us 5.2V 7.2V Four channels TVS Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedM24C01-WMN6P
SO-8-40℃~+85℃ 1Kbit 1mA 2.5V~5.5V 200 Years 3uA 4,000,000 Cycles 400kHz 5ms 900ns Hardware write protection function、Built-in power-on reset (POR) I2C SO-8 EEPROM ROHSSTMicroelectronicsEEPROM
README
STM32F103C8T6_DEVBOARD_2022-main/README.mdSTM103C8T6_DEV!
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C7, C8, C9, C10, C11, C12, C19 |
| 8 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11, R12, R13, R14, R15, R16 |
| 6 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R7, R26, R29, R30, R32 |
| 5 | R_Small_US | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R5, R6, R8 |
| 4 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R18, R20, R21 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 02X02_2.54 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | EEPROM_CN1, ESP01_CN1, OLED_CN1 |
| 3 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3, J5, RS485_CN1 |
| 2 | 105 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C20 |
| 2 | 1K2 | Resistor_SMD:R_0805_2012Metric | R17, R37 |
| 2 | 20R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R25 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C17 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric | R22, R33 |
| 2 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1, Y2 |
| 2 | Conn_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J12, RS485 |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J4, J6 |
| 2 | D_Schottky_Small | Diode_SMD:D_SMB | D4, D9 |
| 2 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1, U2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2 |
| 2 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J1, J8 |
| 1 | 0R33 | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_10x12.6 | C13 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R31 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 3K6 | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric | C25 |
| 1 | 470uF/DIP | Capacitor_SMD:CP_Elec_10x12.6 | C24 |
| 1 | 47uF | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Conn_02x04_Odd_Even | FOOTPRINT7:ESP-01_ | ESP1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J10 |
| 1 | ESDA6V1SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | GREEN_LED | LED_SMD:LED_0805_2012Metric | D8 |
| 1 | INDUCTOR | Inductor_SMD:L_12x12mm_H8mm | L2 |
| 1 | LED_BLUE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LED_ORANGE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U9 |
| 1 | LOGO | MFOOTPRINT:iron | G*** |
| 1 | LOGO | MFOOTPRINT:batman | G*** |
| 1 | LOGO | MFOOTPRINT:bart_simpson | G*** |
| 1 | LOGO | MFOOTPRINT:pandas | G*** |
| 1 | M24C01-WMN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | MC33063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Micro_SD_Card_Det | USER_FOOTPRINT1:L-KLS1-TF-003-SDCARD | J9 |
| 1 | ORANGE | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SSD1306_CRY | USER_FOOTPRINT1:128x64OLED | U4 |
Similar boards
- 2 layers175 × 60 mm

- 2 layers70 × 90 mm

Ventilation control
ucw-gadgets/ventilation-control
Board for controlling ventilation system
184 partsMIT - 2 layers85 × 60 mm

BaseModule
KarlVaello/VehicleControlSystem
Vehicle Control System. Using C++ Qt and C. Hardware and Software
67 parts14GPL-3.0 - 2 layers90 × 60 mm

Nexa
KarlVaello/Nexa-Board
Nexa is a Open Source Hardware board based on STM32f103 with a full duplex rs-485 interface
74 parts2GPL-3.0 - 2 layers82.8 × 73.2 mm

- 2 layers100 × 100 mm

MidiBox3
Dethernal/Midibox3
New features for DIN5 MIDI → Waweblaster interface board. Now with MT-32 stuff.
127 parts5MIT - 2 layers68.1 × 52.5 mm

Collector Gate System
AnotherBuildCorner/Mesh_Blast_Gates
What happens when you combine a Woodworker, and an Electrical Engineer? Sometimes the result are things like this. A Mesh controlled set of blast gates for dust collection control.
30 parts1 - 2 layers60 × 66.6 mm

Questions
How big is the Dev PCB?
It measures 60 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dev use?
99 parts, built around the MAX485ED, MC33063AD, ESDA6V1SC6 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dev KiCad files?
From the gkhnmlym/STM32-Dev-Borad repository on GitHub, at the commit this page was made from: the board is STM32F103C8T6_DEVBOARD_2022-main/dev.kicad_pcb and its schematic STM32F103C8T6_DEVBOARD_2022-main/103C8.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dev design in my own project?
Its repository states no licence, so its author keeps all rights: ask gkhnmlym before reusing the design.