2 layers44 × 44 mm
2 layers
Rampzbackup
mjrice/PICA16Power Interface and Control Adapter, an Arduino Mega Reprap Shield
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 144
- Pads
- 473
- Tracks, vias
- 245, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 9 Apr 2016
- Updated
- 17 Apr 2017
Overview
Rampzbackup is an open-source printed circuit board by mjrice, from the mjrice/PICA repository on GitHub. It is a 2-layer board with 100 parts on 144 nets, routed with 245 tracks and 0 vias.
It is built around the MBR0560, SS36 and IRLML6346, with the IRFZ48VSPBF, YC164-JR-07100KL and YC164-JR-0722RL among its other parts. Its parts include 37 connectors, 15 resistors, 14 diodes, 13 capacitors and 5 transistors. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
7
MBR0560
SOD-123-55℃~+150℃ 5.5A 500mA 60V 700mV@500mA Independent SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
SS36
SMA(DO-214AC)-55℃~+125℃ 3A 500uA@60V 60V 700mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
IRLML6346
SOT-23MOSFETsLeiditech
IRFZ48VSPBF
D2PAK-55℃~+175℃ 1 N-channel 1.985nF 110nC 12mΩ@10V 150W 496pF 4V 60V 72A 91pF N-Channel D2PAK MOSFETsInfineon TechnologiesMOSFETs
YC164-JR-07100KL
0603x4100kΩ 4 62.5mW 8 ±200ppm/℃ ±5% 0603x4 Resistor Networks, Arrays ROHSYAGEOResistor Networks & Arrays
YC164-JR-0722RL
0603x422Ω 4 62.5mW 8 ±200ppm/℃ ±5% 0603x4 Resistor Networks, Arrays ROHSYAGEOResistor Networks & ArraysYC164-JR-073K3L
0603x43.3kΩ 4 62.5mW 8 ±200ppm/℃ ±5% 0603x4 Resistor Networks, Arrays ROHSYAGEOResistor Networks & Arrays
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P7, P19, P20, P21, P22, P23, P24, SER0, SER1 |
| 7 | 100UF | Capacitors_SMD:c_elec_6.3x5.8 | C1, C2, C3, C4, C5, C10, C14 |
| 7 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | J1, J2, J3, J4, J5, P5, P32 |
| 6 | CONN_01X02 | RAMPZ:SPACE_CONN_VERT | P25, P27, P28, P29, P30, P33 |
| 6 | Led_Small | LEDs:LED_1206 | D2, D4, D5, D6, D9, D10 |
| 5 | 10K | Resistors_SMD:R_0805_HandSoldering | R20, R21, R22, R23, R24 |
| 5 | 4.7k | Resistors_SMD:R_0805 | R1, R2, R3, R4, R7 |
| 5 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P6, P38, PWM0, PWM1, PWM2 |
| 5 | POLOLU_A4988 | SWDIP8_.6W:SWDIP8_.6W | DRV_E0, DRV_E1, DRV_X1, DRV_Y1, DRV_Z1 |
| 4 | .1UF | Capacitors_SMD:C_0805_HandSoldering | C6, C7, C8, C9 |
| 4 | 36-4966-ND | RAMPZ:SPADE_CONN_RT | P1, P2, P3, P4 |
| 4 | MBR0560 | Diodes_SMD:SOD-123 | D12, D14, D15, D16 |
| 3 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P26, P34, P40 |
| 3 | SS36 | Diodes_SMD:SMA_Handsoldering | D7, D8, D11 |
| 2 | CONN_02X05 | Connect:IDC_Header_Straight_10pins | EXP1, EXP2 |
| 2 | FUSE_CLIP_5x20 | RAMPZ:FUSE_CLIP_5x20 | CS1, CS2 |
| 2 | IRFL024ZPbF | TO_SOT_Packages_SMD:SOT-223 | Q1, Q5 |
| 2 | IRLML6346 | TO_SOT_Packages_SMD:SOT-23 | Q2, Q6 |
| 1 | .1 | Capacitors_SMD:C_1206_HandSoldering | C12 |
| 1 | 10 | Resistors_SMD:R_0805_HandSoldering | R9 |
| 1 | 100K | Resistors_SMD:R_0805_HandSoldering | R11 |
| 1 | 33uH | RAMPZ:RH127 | L1 |
| 1 | 4.7K | Resistors_SMD:R_0805_HandSoldering | R26 |
| 1 | 4.7k | Resistors_SMD:R_0805_HandSoldering | R13 |
| 1 | 40.2K | Resistors_SMD:R_0805_HandSoldering | R25 |
| 1 | ARDUINO_MEGA_SHIELD | RAMPZ:MEGA_NOLINES | SHIELD1 |
| 1 | BSF-3100 | RAMPZ:BSF_RT | SW1 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06 | P11 |
| 1 | CONN_02X04 | Pin_Headers:Pin_Header_Straight_2x04 | P9 |
| 1 | CONN_02X06 | Pin_Headers:Pin_Header_Straight_2x06 | P10 |
| 1 | C_Small | Capacitors_SMD:C_1206_HandSoldering | C13 |
| 1 | D | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D1 |
| 1 | IRFZ48VS | TO_SOT_Packages_SMD:TO-263-3Lead | Q3 |
| 1 | LM2596-ADJ | TO_SOT_Packages_SMD:TO-263-5Lead | U1 |
| 1 | YC164-JR-07100KL | Resistors_SMD:R_Array_Convex_4x1206 | RP2 |
| 1 | YC164-JR-0722RL | Resistors_SMD:R_Array_Convex_4x1206 | RP1 |
| 1 | YC164-JR-073K3L | Resistors_SMD:R_Array_Convex_4x1206 | RP3 |
Questions
What parts does the Rampzbackup use?
100 parts, built around the MBR0560, SS36, IRLML6346 and IRFZ48VSPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rampzbackup KiCad files?
From the mjrice/PICA repository on GitHub, at the commit this page was made from: the board is rampzbackup.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rampzbackup design in my own project?
Its repository states no licence, so its author keeps all rights: ask mjrice before reusing the design.
Similar boards
- 2 layers56.5 × 64.5 mm
- 2 layers100 × 100 mm
- 2 layers43.2 × 58.4 mm
- 2 layers54 × 94 mm
- 8 layers22 × 44 mm
- 4 layers80 × 49 mm
- 2 layers80 × 50 mm
Lcd dual
Novin3dp/7inch-hdmi-screen
این برد دولایه (۶۸×۴۲ میلیمتر) همان پنل ۷ اینچ AT070TN92 و تاچ GT915 را این بار از پورت DSI رزبریپای راه میاندازد. نسخهی HDMI در پوشهی hardware/ دستنخورده باقی مانده است.
127 parts1