
Arduino Minimal PTH
mithat/Arduino_Minimal_PTH
Crazy stupid experiment to see how small you can make an Arduino-compatible board using through-hole parts.

Arduino Pro Mini using through-hole parts
Arduino Pro Mini PTH is an open-source printed circuit board by mithat, from the mithat/Arduino_Pro_Mini_PTH repository on GitHub. It is a 2-layer board of 27.9 × 45.7 mm with 22 parts on 30 nets, routed with 201 tracks and 2 vias.
It is built around the ATMEGA328P-PU, L4931CZ50-AP and CSTLS16M0X53-B0. Its parts include 6 capacitors, 5 resistors, 4 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Crazy stupid experiment to see how close you can get to an Arduino Pro Mini using through hole parts.
Made with KiCad, which is free and open source software. No raptors were touched in the making of this board.
No, I haven't built it (yet?).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | mfk-C_4.0_2.5_2.5_0.5 | C3, C4, C7, C8 |
| 2 | 10K | mfk-R_0.25W_RN55_vert | R1, R2 |
| 2 | 10u | mfk-CRP_5.0_2.0_0.5 | C1, C2 |
| 2 | LED | LED-3MM | D1, D2 |
| 2 | opt | mfk-R_0.25W_RN55_vert | R4, R5 |
| 1 | 330 | mfk-R_0.25W_RN55_vert | R3 |
| 1 | A4 A5 | mfk-SIL-2 | P3 |
| 1 | ATMEGA328P-PU | mfk-DIP-28_300_rnd | IC1 |
| 1 | CSTLS16M0X53-B0 | mfk-Murata-CSTLS_X | X1 |
| 1 | FTDI Basic | mfk-SIL-6 | P2 |
| 1 | I/O hi | mfk-SIL-12 | P4 |
| 1 | I/O lo | mfk-SIL-12 | P1 |
| 1 | L4931CZ50-AP | mfk-TO-92_f321 | U1 |
| 1 | REF | oshw-logo-150mil-FSilk | VAL |
| 1 | Reset | mfk-SW_PUSH_6MM | SW1 |

mithat/Arduino_Minimal_PTH
Crazy stupid experiment to see how small you can make an Arduino-compatible board using through-hole parts.

pablojonsson/DaisyMultiFX
Code for a Daisy Seed development board to run guitar effects

bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed

tebl/RC-Light-System
Various projects on the road to creating a more interesting system for lights on RC cars. It won't be small, but at least I'll have fun making it.

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C
It measures 27.9 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the ATMEGA328P-PU, L4931CZ50-AP and CSTLS16M0X53-B0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mithat/Arduino_Pro_Mini_PTH repository on GitHub, at the commit this page was made from: the board is Arduino_Pro_Mini_PTH.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mithat before reusing the design.