Skip to the content
2 layers100 × 100 mmTwoZoneDamperController, the printed circuit board in 3D

TwoZoneDamperController

mitchins/esp-hvac-controller

A simple relay based two zone low voltage AC damper controller. May also control other loads.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
22
Pads
102
Tracks, vias
201, 11
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
29 Sep 2026
Updated
29 Sep 2026

Overview

TwoZoneDamperController is an open-source printed circuit board by mitchins, from the mitchins/esp-hvac-controller repository on GitHub. It is a 2-layer board of 100 × 100 mm with 25 parts on 22 nets, routed with 201 tracks and 11 vias.

It is built around the ULN2003A. Its parts include 6 resistors, 6 connectors, 4 capacitors, 2 ICs and 2 switches.

Main components

1

README

archive/2021-esp-hvac-donor/README.md

ESP-HVAC

Parts

25
QtyValueFootprintReferences
4MountingHole_3.2mmTwoZoneDamperController:MountingHole_3.2mmMH1, MH2, MH3, MH4
2100nF SW filterCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC3, C4
2SRD-05VDC-SL-C 5VTwoZoneDamperController:Songle_SRD_05VDC_SL_CK1, K2
1100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC2
1100uF 10VCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1
110k RELAY1 pulldownResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5
110k RELAY2 pulldownResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR6
11k SW_A seriesResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
11k SW_B seriesResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
12k2 SW_A pull-upResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
12k2 SW_B pull-upResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
12x ALTRONICS S5983 M205 CLIPS — FUSE TBDTwoZoneDamperController:Altronics_S5983_M205_2Clip_P20.60mmF1
1KF128-5.0/5.08-3P - ZONE 1 OUTPUTTwoZoneDamperController:ZPWAN_126_5_0_J5_LeftJ5
1KF128-5.0/5.08-3P - ZONE 2 OUTPUTTwoZoneDamperController:ZPWAN_126_5_0_J6_RightJ6
1ULN2003APackage_DIP:DIP-16_W7.62mmU1
1WALL CONTROL RJ12Connector_RJ:RJ25_Wayconn_MJEA-660X1_HorizontalJ3
1Wemos D1 Mini (removable)TwoZoneDamperController:Wemos_D1_mini_FemaleSocket_DONORU2
1ZONE 1 DAMPER RJ12 - HVAC 24VAC ONLYConnector_RJ:RJ25_Wayconn_MJEA-660X1_HorizontalJ1
1ZONE 2 DAMPER RJ12 - HVAC 24VAC ONLYConnector_RJ:RJ25_Wayconn_MJEA-660X1_HorizontalJ2
1ZPWAN 126-5.0-02P - FIELD SUPPLY INPUTTwoZoneDamperController:ZPWAN_126_5_0_02PJ4

More from mitchins/esp-hvac-controller

1
  • 2 layers100 × 70 mmESP HVAC, the printed circuit board in 3D

    ESP HVAC

    mitchins/esp-hvac-controller

    A simple relay based two zone low voltage AC damper controller. May also control other loads.

    12 parts

Similar boards

  • 2 layers107 × 54 mmInterface board 1, the printed circuit board in 3D

    Interface board 1

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    63 parts756
  • 4 layers93.3 × 60.3 mmArduino 386EX V5, the printed circuit board in 3D

    Arduino 386EX V5

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    56 parts114
  • 2 layers52 × 61 mmArduino motorfocus, the printed circuit board in 3D

    Arduino motorfocus

    fehlfarbe/arduino-motorfocus

    Arduino motorfocus with moonlite protocol for telescopes

    23 parts58MIT
  • 4 layers199.9 × 69.3 mmZaphod controller, the printed circuit board in 3D

    Zaphod controller

    Scottapotamas/zaphod-bot

    A DIY high performance delta-bot for fun, and lightpainting...

    251 parts53
  • 4 layers285.1 × 48.1 mmAyab esp32, the printed circuit board in 3D

    Ayab esp32

    AllYarnsAreBeautiful/ayab-hardware

    Contains the schematics and layouts for the AYAB Arduino shield

    246 parts50CC-BY-SA-4.0
  • 2 layersDrehorgel20, the printed circuit board in 3D

    Drehorgel20

    bixb922/crank-organ

    MIDI based crank organ software and hardware

    14 parts47MIT
  • 2 layers40 × 80 mmSplitflappcb, the printed circuit board in 3D

    Splitflappcb

    codingcatgirl/split-flap-fae-pcb

    Alternative drop-in replacement PCB for David Kingsman's split-flap display

    46 parts31Apache-2.0
  • 2 layers177.9 × 187.4 mmAudio board 0033 rev.a, the printed circuit board in 3D

    Audio board 0033 rev.a

    palazzol/CyberamicControlCenter

    Repo for docs and info about the Cyberamic Control Center

    105 parts16

Questions

How big is the TwoZoneDamperController PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TwoZoneDamperController use?

25 parts, built around the ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TwoZoneDamperController KiCad files?

From the mitchins/esp-hvac-controller repository on GitHub, at the commit this page was made from: the board is two-zone-damper-controller/TwoZoneDamperController.kicad_pcb and its schematic two-zone-damper-controller/TwoZoneDamperController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TwoZoneDamperController design in my own project?

Its repository states no licence, so its author keeps all rights: ask mitchins before reusing the design.