2 layers34 × 28.8 mm
VisibleLight
l0ad/ubpe-ressources
Dépôt public contenant des cartes capteur produites par le L0AD dans le cadre du projet "Un ballon pour l'école" (Planète-Sciences)
11 parts
2 layers97.8 × 58.4 mm
Temp sensor
mitchgu/6301-temp-sensor- Size
- 97.8 × 58.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 90
- Pads
- 263
- Tracks, vias
- 405, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Dec 2016
- Updated
- 14 Mar 2018
Overview
Temp sensor is an open-source printed circuit board by mitchgu, from the mitchgu/6301-temp-sensor repository on GitHub. It is a 2-layer board of 97.8 × 58.4 mm with 63 parts on 90 nets, routed with 405 tracks and 19 vias.
It is built around the LM6132BIN, CD4066BE and LM311N. Its parts include 41 resistors, 8 capacitors, 8 ICs and 2 connectors. It belongs with the sensors and measurement boards of this library.
Main components
3
LM6132BIN
PDIP-8-40℃~+85℃ 100dB 10MHz 14V/us 2 2.7V~24V 27nV/√Hz@1kHz 3.4nA 3.5mA 350nA 360uA 4mV 5uV/℃ Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
CD4066BE
PDIP-14-55℃~+125℃ 125Ω 15ns 1:1 3V~18V 40MHz PDIP-14 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersLM311N
DIP-80℃~+70℃ 1 250nA 300ns 36V 50nA 5V~30V 7.5mA 7.5mV ±15V DIP-8 Comparators ROHSHGSEMIComparators
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100 | Resistors_SMD:R_0805_HandSoldering | R10, R11, R12, R13, R14, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 +16 |
| 7 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C2, C3, C4, C5, C6, C7, C8 |
| 4 | 74HC595-R | Housings_DIP:DIP-16_W7.62mm | U6, U7, U8, U9 |
| 4 | 7SEG_PHYSICAL | Displays_7-Segment:7SegmentLED_LTS6760_LTS6780 | AFF1, AFF2, AFF3, AFF4 |
| 3 | 10K | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R1, R5, R6 |
| 1 | 100K | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R2 |
| 1 | 10k | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R41 |
| 1 | 1u | Capacitors_ThroughHole:C_Rect_L13_W6_H12_P10 | C1 |
| 1 | 2.2K | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R3 |
| 1 | 3.9K | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R15 |
| 1 | 4.7K | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R16 |
| 1 | 470 | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R4 |
| 1 | CD4066B | Housings_DIP:DIP-14_W7.62mm | U2 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05 | P2 |
| 1 | LM311N | Housings_DIP:DIP-8_W7.62mm | U4 |
| 1 | LM6132 | Housings_DIP:DIP-8_W7.62mm | U3 |
| 1 | MPQ3906 | Housings_DIP:DIP-14_W7.62mm | U1 |
| 1 | Pmod | Pin_Headers:Pmod_Male | P1 |
Questions
How big is the Temp sensor PCB?
It measures 97.8 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Temp sensor use?
63 parts, built around the LM6132BIN, CD4066BE and LM311N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Temp sensor KiCad files?
From the mitchgu/6301-temp-sensor repository on GitHub, at the commit this page was made from: the board is kicad/temp_sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Temp sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask mitchgu before reusing the design.
Similar boards
- 2 layers147.2 × 58.3 mm
Li IonBatteryProtection
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
81 parts6MIT - 2 layers127 × 127 mm
- 2 layers99.5 × 75 mm
Final outline
MITEVT/opel_velocity_interface
MIT EVT's Opel GT Project Driver Interface Module. Acts as an inteface between the user and the electrical system for controlling power distribution and auxiliary peripherals.
58 parts1MIT - 2 layers94.5 × 70 mm
- 2 layers79.4 × 91.6 mm
Loconet
dirkjankrijnders/lnet-iface-hub
Modular hub/frontpanel/microcontroller interface PCB's
38 parts - 4 layers100 × 100 mm
- 2 layers
Multimeter
MadsRudolph/personal-projects
One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).
62 parts