2 layers50.8 × 78.7 mm
TW39-mit Powersave
rwobrecht/piTelex-contrib
Contributions (hardware, software) around piTelex
29 parts2GPL-3.0
2 layers127 × 127 mm
Hvsupply
xunil/hvsupply5Design files for an adjustable high-voltage bench supply.
- Size
- 127 × 127 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 38
- Pads
- 191
- Tracks, vias
- 284, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 14 May 2013
- Updated
- 22 Dec 2013
Overview
Hvsupply is an open-source printed circuit board by xunil, from the xunil/hvsupply repository on GitHub. It is a 2-layer board of 127 × 127 mm with 70 parts on 38 nets, routed with 284 tracks and 25 vias.
It is built around the LM358N, LM311N and LM7812, with the IRF740 and TIP50 among its other parts. Its parts include 20 resistors, 15 diodes, 11 connectors, 9 capacitors and 7 transistors.
Main components
5
LM358N
DIP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierLM311N
DIP-80℃~+70℃ 1 250nA 300ns 36V 50nA 5V~30V 7.5mA 7.5mV ±15V DIP-8 Comparators ROHSHGSEMIComparators
LM7812
TO-263TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIUncategorised
IRF740
TO-220-55℃~+175℃ 1 N-channel 1.162nF 100W 10A 17pF 32nC@10V 400V 4V 500mΩ@10V N-Channel TO-220 MOSFETs ROHSMinosMOSFETs
TIP50
TO-2201 NPN 10MHz 150 1V 1mA 2A 400V 40W 5V NPN TO-220 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4007 | R1 | D6, D7, D8, D9, D12, D13, D14, D15 |
| 6 | 100 | R1 | R1, R3, R5, R7, R9, R14 |
| 6 | CONN_1 | 1pin | P6, P7, P8, P9, P10, P11 |
| 5 | .01 | C1 | C1, C2, C3, C4, C5 |
| 5 | 16.2, 3W | RS02B16R20FE70 | R2, R4, R6, R8, R10 |
| 5 | 16V, 1.3W | R1 | D1, D2, D3, D4, D5 |
| 5 | IRF740 | TO220_VERT_HEATSINK | Q1, Q2, Q3, Q4, Q5 |
| 3 | 10k | R1 | R18, R19, R21 |
| 2 | 2.2k | R1 | R16, R17 |
| 1 | 0.1u | C1 | C9 |
| 1 | 0.33u | C1 | C8 |
| 1 | 100k | RJ128-5.0-3 | RV2 |
| 1 | 10M | R1 | R20 |
| 1 | 10u | C2V10 | C7 |
| 1 | 12VAC_IN | RJ128-5.0-2 | P1 |
| 1 | 1N914 | R1 | D11 |
| 1 | 220 | R1 | R12 |
| 1 | 2n7000 | TO92DGS | Q9 |
| 1 | 3.3k | R1 | R13 |
| 1 | 330 | R1 | R11 |
| 1 | 47u | CP7P5X16 | C6 |
| 1 | 500k | RJ128-5.0-3 | RV1 |
| 1 | HV_IN | RJ128-5.0-3 | P2 |
| 1 | HV_OUT | RJ128-5.0-2 | P3 |
| 1 | LED | PIN_ARRAY_2X1 | D10 |
| 1 | LM311N | DIP-8__300 | U2 |
| 1 | LM358N | DIP-8__300 | U3 |
| 1 | LM7812 | LM78XX | U4 |
| 1 | LR8 | TO92-123 | U1 |
| 1 | RELAY_2RT | RTE25012 | K1 |
| 1 | SENSE_I | RJ128-5.0-2 | P5 |
| 1 | SENSE_V | RJ128-5.0-2 | P4 |
| 1 | SPST | RJ128-5.0-2 | SW1 |
| 1 | TIP50 | TO220_VERT | Q8 |
Questions
How big is the Hvsupply PCB?
It measures 127 × 127 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hvsupply use?
70 parts, built around the LM358N, LM311N, LM7812 and IRF740. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hvsupply KiCad files?
From the xunil/hvsupply repository on GitHub, at the commit this page was made from: the board is hvsupply.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hvsupply design in my own project?
Its repository states no licence, so its author keeps all rights: ask xunil before reusing the design.
Similar boards
- 2 layers120 × 75 mm
PCB FLM FTE-12V
EngLuizs/Fonte_Linear_12V
Fonte linear regulada ajustável (12V/1A) com telemetria digital integrada. Desenvolvida com ESP32, KiCad e PlatformIO para monitoramento local (LCD) e remoto (Web Server Wi-Fi).
55 parts1MIT - 2 layers147.2 × 58.3 mm
Li IonBatteryProtection
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
81 parts6MIT - 2 layers99.5 × 75 mm
Final outline
MITEVT/opel_velocity_interface
MIT EVT's Opel GT Project Driver Interface Module. Acts as an inteface between the user and the electrical system for controlling power distribution and auxiliary peripherals.
58 parts1MIT - 2 layers94.5 × 70 mm
- 2 layers79.4 × 91.6 mm
Loconet
dirkjankrijnders/lnet-iface-hub
Modular hub/frontpanel/microcontroller interface PCB's
38 parts - 4 layers100 × 100 mm
- 2 layers
Multimeter
MadsRudolph/personal-projects
One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).
62 parts