minye065/imu-dev-boardA devboard that lets you test imu programs via the onboard imu and being able to test data to it
Imu dev board is an open-source printed circuit board by minye065, from the minye065/imu-dev-board repository on GitHub. It is a 2-layer board of 33 × 29 mm with 39 parts on 64 nets, routed with 435 tracks and 59 vias.
It is built around the RP2350A, W25Q128JVSIQ and ICM-42688-P, with the TLV75533PDBV among its other parts. Its parts include 21 capacitors, 8 resistors, 4 ICs, 2 switches and 1 diode. It belongs with the microcontroller boards and sensors and measurement boards and the RP2350 boards of this library.
# Imu dev board
A devboard that lets you test imu programs via the onboard imu and being able to test data to it
*Powered via the usb cable
Features: RP2350A - MCU ICM-42688-P - IMU
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nf | Capacitor_SMD:C_0402_1005Metric | C8, C13, C14, C15, C16, C17, C18, C19, C20, C21 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R7, R8 |
| 3 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5 |
| 2 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C9, C11 |
| 2 | 15pf | Capacitor_SMD:C_0402_1005Metric | C7, C22 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 2.2uf | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 3.3 | kicad-includes:AOTA-B2016 | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | Crystal_GND24, 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | ICM-42688-P | kicad-includes:ICM-42688-P | U4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RP2350A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_Shouhan_MSK12C02 | SW2 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
It measures 33 × 29 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the RP2350A, W25Q128JVSIQ, ICM-42688-P and TLV75533PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the minye065/imu-dev-board repository on GitHub, at the commit this page was made from: the board is pcb/imuDevBoard.kicad_pcb and its schematic pcb/imuDevBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask minye065 before reusing the design.
sequoia-hope/bluebuzz
A Bluetooth vibrator controller: RP2350A + Raspberry Pi Radio Module 2 (the first board, an nRF52840 module, is abandoned and kept in archive/nrf52840/): Wi-Fi 4 and Bluetooth 5.2 Classic + LE (CYW43439), so the toy can…
RotemCarr/snowboard-fc
Snowboard flight controller hardware and software stacks - using the Zephyr framework
bastian2001/Kolibri-FC-Hardware
Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard
nguyencanhanh/luckfox-rv1103-drone
AI quadcopter on one RV1103 (Luckfox Pico Mini B): Linux + RISC-V MCU flight loop, SITL with 3D pilot view, KiCad flight-controller board
profdc9/PicoAlt2
An alternative Pi Pico 2 (RP2350) type board you can have made yourself.
ROAR-QUTRC/perseus-v3
The code base for the QUT Robotics Club ROAR teams rover Perseus starting 2026