Skip to the content
2 layers20 × 33 mmJust a scope, the printed circuit board in 3D

Often times when working on embedded projects, once GPIO has just been configured and you take the leap from programming into the real world, you cannot even get a blinky program running.

Size
20 × 33 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
21
Pads
38
Tracks, vias
46, 5
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Jan 2025
Updated
9 Feb 2025

Overview

Just a scope is an open-source printed circuit board by Millioncove, from the Millioncove/just-a-scope repository on GitHub. It is a 2-layer board of 20 × 33 mm with 13 parts on 21 nets, routed with 46 tracks and 5 vias.

It is built around the LM358. Its parts include 5 resistors, 4 connectors, 1 capacitor and 1 IC.

Main components

1

README

README.md

The simplest oscilloscope imaginable.

just-a-scope is a battery powered, ultra light, and tiny oscilloscope.

Often times when working on embedded projects, once GPIO has just been configured and you take the leap from programming into the real world, you cannot even get a blinky program running. Even if you are lucky enough to succeed in your LED-blinking, whatever you are moving onto next won't work. It is simply way more complicated than a single LED.

At that point you wish you could "just see the electricity", but you cannot. You wish you had an oscilloscope, but all of the commercially available ones are extremely overkill and way out of budget. This is the problem just-a-scope tries to solve.

just-a-scope is really just an esp32 with some protection, scaling electronics and probes connected to the Analog-to-Digital converter. 9 times out of 10, that's all we'll ever need.

The plot is drawn in a web browser on a device connected over WIFI. At that point you already have the entire plot on your computer, and you can download a .csv file with all measurements made.

Hardware

The microcontroller is an esp32s3, bought already soldered onto a SEEED Studio XIAO. This is a cheap and very small board which includes a USB-C connector as well as charging electronics for a lithium battery.

When buying one of these boards, you are likely to receive an antenna in the same package. This antenna is known to be unusable due to very poor signal, so a third party antenna must be used.

Parts

13
QtyValueFootprintReferences
210kResistor_SMD:R_0805_2012MetricR2, R5
21kResistor_SMD:R_0805_2012MetricR1, R3
2Conn_01x01_PinConnector_Wire:SolderWirePad_1x01_SMD_5x10mmJ1, J2
2Conn_01x07_SocketConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ3, J4
2MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2
1100nFCapacitor_SMD:C_0805_2012MetricC1
1680kResistor_SMD:R_0805_2012MetricR4
1LM358Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2

Similar boards

  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers68.8 × 53.6 mmZArduino, the printed circuit board in 3D

    ZArduino

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    46 parts269
  • 2 layers152 × 88 mmRFBitBangSMT, the printed circuit board in 3D

    RFBitBangSMT

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    271 parts222
  • 2 layers118 × 103.5 mmEV Charger2, the printed circuit board in 3D

    EV Charger2

    fotherja/EV_Charger

    Arduino Uno Code for EV Charger

    62 parts167MIT
  • 2 layers113 × 62.2 mmFullScope, the printed circuit board in 3D

    FullScope

    tvlad1234/pillScopePlus

    Oscilloscope based around the STM32F401 Black Pill and a color LCD screen

    15 parts165Apache-2.0
  • 2 layers75.2 × 61.1 mmHelios, the printed circuit board in 3D

    Helios

    Grix/helios_dac

    Helios Laser DAC

    102 parts132
  • 2 layers144.1 × 182.2 mmSHVC CPU-01, the printed circuit board in 3D

    SHVC CPU-01

    starlightk7/OpenSFC

    OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

    498 parts114CERN-OHL-S-2.0
  • 2 layers100 × 85 mmVNA, the printed circuit board in 3D

    VNA

    profdc9/VNA

    Vector Network Analyzer based on the STM32F103C8T6 bluepill

    178 parts93

Questions

How big is the Just a scope PCB?

It measures 20 × 33 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Just a scope use?

13 parts, built around the LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Just a scope KiCad files?

From the Millioncove/just-a-scope repository on GitHub, at the commit this page was made from: the board is Electronics/just-a-scope.kicad_pcb and its schematic Electronics/just-a-scope.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Just a scope design in my own project?

Its repository states no licence, so its author keeps all rights: ask Millioncove before reusing the design.