

- Size
- 48.3 × 71.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 44
- Pads
- 113
- Tracks, vias
- 137, 112
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Feb 2023
- Updated
- 19 May 2023
Overview
RFID is an open-source printed circuit board by MilanR312, from the MilanR312/RFID-IP repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.3 × 71.1 mm with 22 parts on 44 nets, routed with 137 tracks and 112 vias.
It is built around the 74LVC2G14GW. Its parts include 5 capacitors, 5 connectors, 3 ICs, 2 resistors and 1 inductor. It belongs with the radio and wireless boards of this library.
Main components
1README
README.mdRFID-IP
Summary
Automatic inventory managment using a ultra high frequency rfid and postgres. Contains a website to control the esp and the schematics to rebuild.
folder structure
- 3D files of the enclosure using fusion 360
- database implemented using postgress
- electronic schematic files using kicad
- RFIDEspCode to run the esp32
- webApp server using blazor
credits
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_4mm | H1, H2, H3, H4 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 22µF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 3.9µH | KiCad:SRR4828A3R9Y | L1 |
| 1 | 5K1 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 5k | Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical | RV1 |
| 1 | 5k1 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 74LVC2G14 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | AP63202WU | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | Conn Uart | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J3 |
| 1 | Conn deur | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn motion | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x16_Pin | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J4 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | UGent_standard_stock_Connector:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
| 1 | ~ | Library:espConn | U3 |
Similar boards
- 4 layers137 × 79.5 mm

- 2 layers75 × 82 mm

- 4 layers210.8 × 74.9 mm

Bkm-10rlternative
skumlos/bkm-10rlternative
Project aiming to replicate the BKM-10R/11R remote for Sony professional CRT monitors.
257 parts17 - 4 layers47 × 27 mm

SD Swap
Mr-Bossman/SD_Swap
A development tool which swaps an sdcard between a usb3 card reader or a SBC.
44 parts14 - 2 layers66 × 51.5 mm

WiFi Gate Controller
mikelawrence/WiFi-Gate-Controller
WiFi enabled Gate Controller Addon to US Automatic Gate Opener
91 parts8MIT - 2 layers80 × 90 mm

WiFi Septic Controller
mikelawrence/WiFi-Septic-Controller
WiFi enabled Septic Controller
104 parts8MIT - 6 layers83.5 × 99.4 mm

- 2 layers39 × 66.5 mm

Questions
How big is the RFID PCB?
It measures 48.3 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RFID use?
22 parts, built around the 74LVC2G14GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RFID KiCad files?
From the MilanR312/RFID-IP repository on GitHub, at the commit this page was made from: the board is electronics/RFID/RFID.kicad_pcb and its schematic electronics/RFID/RFID.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RFID design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).