
Stencil
mikelawrence/esphome-fan-controller
This is a simple ESP32-C3 based fan controller design to support 4-pin computer fans from 5V to 24V at up to 2 amps. Fan tachometer is supported.

This is a simple ESP32-C3 based fan controller design to support 4-pin computer fans from 5V to 24V at up to 2 amps. Fan tachometer is supported.
Esphome fan controller is an open-source printed circuit board by mikelawrence, from the mikelawrence/esphome-fan-controller repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 25 × 42.5 mm with 51 parts on 54 nets, routed with 296 tracks and 158 vias.
It is built around the SN74LV1T34DBV, ESP32-C3-MINI-1 and MPM3506AGQV-P, with the TPS613222ADBV, SS2FH6HM3/H and ESDS452DBZ among its other parts. Its parts include 15 resistors, 13 capacitors, 6 ICs, 6 diodes and 2 connectors. It belongs with the home automation and IoT boards and the ESP32 and RISC-V boards of this library.
This is a simple ESP32-C3 based fan controller design to support 4-pin computer fans from 5V to 24V at up to 2 amps. Fan tachometer is supported.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10KΩ | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R9, R15 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6, C10, C12 |
| 3 | 5.1KΩ | Resistor_SMD:R_0402_1005Metric | R7, R8, R13 |
| 2 | 1kΩ | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C11, C13 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 2 | 47uF | Capacitor_SMD:C_0805_2012Metric | C3, C5 |
| 2 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U4, U5 |
| 2 | SS2FH6HM3/H | Diode_SMD:D_SMF | D1, D4 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2 |
| 2 | ~ | MountingHole:MountingHole_2.2mm_M2_Pad | MH1, MH2 |
| 2 | ~ | Button_Switch_SMD:SW_SPST_B3U-1000P-B | SW1, SW2 |
| 1 | 107KΩ | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 1uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 200KΩ | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 24KΩ | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 5.23KΩ | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 75KΩ | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | ESDS452 | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | ESP32-C3-MINI-1 | ESP32-C3-MINI:ESP32-C3-MINI-1-N4X | U3 |
| 1 | Fan_CPU_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 1 | LM76202-Q1 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm_ThermalVias | U6 |
| 1 | MPM3506AGQV-P | MPM3506A:QFN-19 | U1 |
| 1 | OSHW-Logo_5.7x6mm_SilkScreen | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | TEXT1 |
| 1 | SD36C-01F | Diode_SMD:D_SOD-323 | D6 |
| 1 | SK6812-4020 | SK6812-4020:SK6812-4020 | D5 |
| 1 | Screw_Terminal_01x02 | 1984769:1984769 | J1 |
| 1 | TPS613222ADBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB-C | TYPE-C-31-M-12:HRO_TYPE-C-31-M-12 | J2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | D3 |

mikelawrence/esphome-fan-controller
This is a simple ESP32-C3 based fan controller design to support 4-pin computer fans from 5V to 24V at up to 2 amps. Fan tachometer is supported.

mikelawrence/esphome-rgbcct-led-controller
ESPHome RGBCCT LED Controller is a PCB design that support a 5-Channel LED arrangement with Red, Green, Blue, Warm White and Cool White LEDs.





sneakylizard123-4/MP3player
Why the STM32H743: it has the RAM to buffer audio enough peripherals that almost every feature ended up on its own bus and 480MHz means I never have to care about optimization.


bismarx-v1/GPS-Compass
The compass that doesnt point to north, but it points to a GPS location, or a list of locations and points to the nearest one
It measures 25 × 42.5 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the SN74LV1T34DBV, ESP32-C3-MINI-1, MPM3506AGQV-P and TPS613222ADBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mikelawrence/esphome-fan-controller repository on GitHub, at the commit this page was made from: the board is pcb/esphome-fan-controller.kicad_pcb and its schematic pcb/esphome-fan-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).