
OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

Collection of hacks and iterative builds for RUFS-1, the satellite to bring Rufs the Space Lion in to space (http://rufsklubben.se/).
Aprs tracker is an open-source printed circuit board by mik4el, from the mik4el/rufs repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 39 parts on 49 nets.
Its parts include 21 resistors, 7 connectors, 5 capacitors, 2 diodes and 2 transistors.
Collection of hacks and iterative builds for RUFS-1, the satellite to bring Rufs the Space Lion in to space (http://rufsklubben.se/).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistors_SMD:R_0805_HandSoldering | R13, R14, R20, R21 |
| 4 | 1K | Resistors_SMD:R_0805_HandSoldering | R1, R2, R12, R18 |
| 3 | 100K | Resistors_SMD:R_0805_HandSoldering | R3, R8, R11 |
| 2 | 100nF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C3, C4 |
| 2 | 20K | Resistors_SMD:R_0805_HandSoldering | R15, R16 |
| 2 | 2N7002 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 2 | 3K3 | Resistors_SMD:R_0805_HandSoldering | R9, R19 |
| 1 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C5 |
| 1 | 10K | Potentiometers:Potentiometer_Trimmer-Suntan-TSR-3386P | RV1 |
| 1 | 1K 1% | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 1uF | Capacitors_ThroughHole:C_Rect_L7_W4.5_P5 | C1 |
| 1 | 2.5mm Stereo Jack | Pin_Headers:Pin_Header_Straight_1x03 | J2 |
| 1 | 270 1% | Resistors_SMD:R_0805_HandSoldering | R10 |
| 1 | 2K2 1% | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 3.5mm Stereo Jack | Pin_Headers:Pin_Header_Straight_1x03 | J1 |
| 1 | 3K9 1% | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | 4.7K | Resistors_SMD:R_0805_HandSoldering | R17 |
| 1 | 4.7uF | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | C2 |
| 1 | 8K2 1% | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | BAOFENG | Pin_Headers:Pin_Header_Straight_1x04 | P4 |
| 1 | GPS | Pin_Headers:Pin_Header_Straight_1x04 | P5 |
| 1 | POWER | Pin_Headers:Pin_Header_Straight_1x03 | P1 |
| 1 | RADIO | Pin_Headers:Pin_Header_Straight_1x10 | P2 |
| 1 | RX (RED) | LEDs:LED_1206 | D2 |
| 1 | TEMPERATURE | Pin_Headers:Pin_Header_Straight_1x03 | P3 |
| 1 | TX (GREEN) | LEDs:LED_1206 | D1 |
| 1 | arduino_mini | arduino pro mini:ARDUINO_PRO_MINI | U1 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040

windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mik4el/rufs repository on GitHub, at the commit this page was made from: the board is hacks/aprs_tracker/hardware/v1/aprs_tracker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).