2 layers52.3 × 50.3 mm
1016-Breadboard Power Supply
wilsondr9999/1016-Breadboard-Power-Supply
An add-on module for powering your breadboard with selectable rail voltages.
82 parts14AGPL-3.0
2 layers38 × 3.2 mm
Arduino
mihneaspirescu/arduino-basic- Size
- 38 × 3.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 31
- Pads
- 102
- Tracks, vias
- 216, 136
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Aug 2020
- Updated
- 16 Aug 2020
Overview
Arduino is an open-source printed circuit board by mihneaspirescu, from the mihneaspirescu/arduino-basic repository on GitHub. It is a 2-layer board of 38 × 3.2 mm with 23 parts on 31 nets, routed with 216 tracks and 136 vias.
It is built around the AZ1117CH-5.0TRG1, LTST-C150CKT and PJ-102B. Its parts include 9 capacitors, 7 connectors, 2 resistors, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
AZ1117CH-5.0TRG1
SOT-223-20℃~+125℃@(Tj) 0.003%Vout 1 1.2V@(800mA) 1.35A 15V 4mA 5V 70dB@(120Hz) Fixed Over Current Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LTST-C150CKT
1206-55℃~+85℃ 1.8V 100mW 11.2mcd 130° 20mA 638nm 660nm Discrete Diode Red Water Clear 1206 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
PJ-102B
插件-25℃~+85℃ 2.5mm 24V 5A 6.5mm DC Power Jack Right Angle 插件 DC Power Connectors ROHSCUIDC Power Connectors
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5, C7, C8 |
| 2 | 22pf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 1 | 0.1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9 |
| 1 | 10k | digikey-footprints:0805 | R2 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 16Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 22uf | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 1 | 330 | digikey-footprints:0805 | R1 |
| 1 | ATMEGA328P-AUR | digikey-footprints:TQFP-32_7x7mm | U1 |
| 1 | AZ1117CH-5.0TRG1 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Female | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | Conn_01x09_Female | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J7 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | LTST-C150CKT | digikey-footprints:1206 | D1 |
| 1 | PJ-102B | PJ-102B:CUI_PJ-102B | J1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
Questions
How big is the Arduino PCB?
It measures 38 × 3.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduino use?
23 parts, built around the AZ1117CH-5.0TRG1, LTST-C150CKT and PJ-102B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino KiCad files?
From the mihneaspirescu/arduino-basic repository on GitHub, at the commit this page was made from: the board is arduino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino design in my own project?
Its repository states no licence, so its author keeps all rights: ask mihneaspirescu before reusing the design.
Similar boards
- 4 layers62.3 × 94.3 mm
STM32N6 Thesis Board
tobiasbaas/Roboterarm1
Herzlich willkommen zum Repo des Robotersarmes der Arbeitsgruppe. Bitte beachtet, dass es sich hierbei handelt um eine Erweiterung bereits vorhandener Infrastruktur.
221 parts1 - 4 layers113 × 113 mm
UC Agri PV
DerSchweigefuchs/uC_Agri-PV
A custom PCB designed for environmental monitoring in agricultural photovoltaic installations. Built around the STM32U5 ultra-low-power microcontroller with LoRaWAN connectivity and multiple sensor interfaces.
248 parts - 2 layers113.4 × 56 mm
- 2 layers55.9 × 25.4 mm
LedSplatStrand
ngdrascal/IcicleLights
A remix of Adafruit's Holiday Icicle Lights with Flair build.
10 parts1CERN-OHL-P-2.0 - 6 layers100 × 160 mm
OWNVERTER
owntech-foundation/OWNVERTER
The OwnVerter is an open-source 3-phase power converter that can be used to control multiple types of motors and is compatible with different types of sensors.
474 parts16 - 4 layers31 × 100 mm
Kp ptr
PTR-projects/PTR_mega_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.
208 parts3MIT - 2 layers85 × 35 mm
