Skip to the content
2 layers110 × 90 mmMic1-cpu, the printed circuit board in 3D
Size
110 × 90 mm
Copper layers
2
Thickness
1.58 mm
Parts
30
Nets
54
Pads
210
Tracks, vias
842, 104
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Nov 2024
Updated
3 Oct 2025

Overview

Mic1-cpu is an open-source printed circuit board by mickeeriksson, from the mickeeriksson/MIC-1 repository on GitHub. It is a 2-layer board of 110 × 90 mm with 30 parts on 54 nets, routed with 842 tracks and 104 vias.

It is built around the ATF22V10C-7PX. Its parts include 6 resistors, 6 connectors, 5 capacitors, 4 ICs and 2 diodes. It belongs with the FPGA and CPLD boards of this library.

Main components

1

README

README.md

MIC-1

This is the repo for MIC-1

Contents

  • kernels/ : contains the MONITOR ROM source for MIC-1

Parts

30
QtyValueFootprintReferences
40.1uFCapacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC1, C2, C3, C4
33.3kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R5, R6
2MountingHole:MountingHole_2.2mm_M2_DIN965_PadHole1, Hole2
2Hole3, Hole4
2330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R3
2LEDLED_THT:LED_D5.0mmD1, D2
2PowerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4, J5
11.0MHzSamacSys_Parts:ECS100AX010Y1
1100uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC5
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
15VConnector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_HorizontalJ2
162256Package_DIP:DIP-28_W15.24mm_LongPadsIC2
1AT28C256Socket:DIP_Socket-28_W11.9_W12.7_W15.24_W17.78_W18.5_3M_228-1277-00-0602JIC3
1ATF22V10CPackage_DIP:DIP-24_W7.62mm_Socket_LongPadsIC4
1CLK SELConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1CLK/~{RW}Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1MBUS_8/16Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ1
1RESETButton_Switch_THT:SW_PUSH_6mm_H4.3mmSW1
1W65C02Package_DIP:DIP-40_W15.24mm_Socket_LongPadsIC1

The 29 most common of 30 parts.

More from mickeeriksson/MIC-1

2
  • 2 layers160 × 70 mmDebugboard, the printed circuit board in 3D

    Debugboard

    mickeeriksson/MIC-1

    23 parts
  • 2 layers160 × 90 mmBusboard, the printed circuit board in 3D

    Busboard

    mickeeriksson/MIC-1

    18 parts

Similar boards

  • 4 layers160 × 100 mmRosco m68k, the printed circuit board in 3D

    Rosco m68k

    rosco-m68k/rosco_m68k

    Design, documentation and software for the Really Old School Computer (M68K)

    140 parts200
  • 4 layers172.7 × 135.9 mmJJ65c02, the printed circuit board in 3D

    JJ65c02

    jimjag/JJ6502

    My 6502 Based Breadboard Project

    53 parts26MIT
  • 4 layers100 × 100 mmRosco 6502, the printed circuit board in 3D

    Rosco 6502

    rosco-6502/rosco_6502

    Design, documentation and software for the Really Old School Computer (6502)

    62 parts8MIT
  • 2 layers252.7 × 106.7 mmPCB - CPU V1, the printed circuit board in 3D

    PCB - CPU V1

    FredericSegard/6309-Unleashed

    Project LogicSpark-09, an old CPU but a favorite

    97 parts3
  • 2 layers238 × 174 mmRevision 4, the printed circuit board in 3D

    Revision 4

    FredericSegard/MH6502_v4

    This is my masterpiece MH6502, 4th revision.

    121 parts3
  • 4 layers101.6 × 101.6 mmSBC09, the printed circuit board in 3D

    SBC09

    hoglet67/SBC09

    Respsitory for the SBC09 6809/6309 Board Design

    60 parts3
  • 2 layers18.4 × 36.2 mmC64-PLA, the printed circuit board in 3D

    C64-PLA

    Guimli/C64-PLA

    Another PLA for Commodore 64

    5 parts2CC0-1.0
  • 4 layers290 × 215 mmPlacard, the printed circuit board in 3D

    Placard

    tocksin/placard

    PLA computer

    187 parts2AGPL-3.0

Questions

How big is the Mic1-cpu PCB?

It measures 110 × 90 mm and has 2 copper layers, 1.58 mm thick.

What parts does the Mic1-cpu use?

30 parts, built around the ATF22V10C-7PX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mic1-cpu KiCad files?

From the mickeeriksson/MIC-1 repository on GitHub, at the commit this page was made from: the board is hardware/cpuboard/mic1-cpu.kicad_pcb and its schematic hardware/busboard/busboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mic1-cpu design in my own project?

Its repository states no licence, so its author keeps all rights: ask mickeeriksson before reusing the design.