2 layers110 × 90 mm
2 layers160 × 70 mm
Debugboard
mickeeriksson/MIC-1- Size
- 160 × 70 mm
- Copper layers
- 2
- Thickness
- 1.58 mm
- Parts
- 23
- Nets
- 94
- Pads
- 216
- Tracks, vias
- 545, 32
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Nov 2024
- Updated
- 3 Oct 2025
Overview
Debugboard is an open-source printed circuit board by mickeeriksson, from the mickeeriksson/MIC-1 repository on GitHub. It is a 2-layer board of 160 × 70 mm with 23 parts on 94 nets, routed with 545 tracks and 32 vias.
It is built around the LTA-1000Y and LTA-1000HR. Its parts include 6 resistors and 5 connectors.
Main components
2
LTA-1000Y
DIP-20-2.54mm-35℃~+85℃ 0.54mcd~2mcd 2.1V 20mA 585nm 588nm Discrete Diode Yellow DIP-20-2.54mm LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
LTA-1000HR
DIP-20-2.54mm-35℃~+85℃ 25mA 2V 623nm 635nm 75mW Discrete Diode Red Red Lens DIP-20-2.54mm LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
README
README.mdMIC-1
This is the repo for MIC-1
Contents
- kernels/ : contains the MONITOR ROM source for MIC-1
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 4 | MountingHole_2.7mm_M2.5_Pad_TopBottom | MountingHole:MountingHole_2.7mm_M2.5_Pad_TopBottom | hole1, hole1, hole1, hole1 |
| 2 | 330 | SamacSys_Parts:4611X101221LF | RN2, RN3 |
| 2 | LTA-1000Y | SamacSys_Parts:DIPS762W50P254L2527H825Q20N | DS2, DS3 |
| 1 | 330 | SamacSys_Parts:4609X101102LF | RN1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | Conn_01x16_Pin | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J5 |
| 1 | HDSP-4836_2 | Display:HDSP-4836 | BAR1 |
| 1 | LTA-1000HR | SamacSys_Parts:DIPS762W50P254L2527H825Q20N | DS1 |
| 1 | MBUS_8/16 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
The 22 most common of 23 parts.
Questions
How big is the Debugboard PCB?
It measures 160 × 70 mm and has 2 copper layers, 1.58 mm thick.
What parts does the Debugboard use?
23 parts, built around the LTA-1000Y and LTA-1000HR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Debugboard KiCad files?
From the mickeeriksson/MIC-1 repository on GitHub, at the commit this page was made from: the board is hardware/debugboard/debugboard.kicad_pcb and its schematic hardware/busboard/busboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Debugboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask mickeeriksson before reusing the design.
More from mickeeriksson/MIC-1
2- 2 layers160 × 90 mm
Similar boards
- 2 layers151.1 × 95.3 mm
LED Panel
Plasmarobo/Disarmed
Heavily inspired by Keep Talking and Nobody Explodes and Bomb Corp.
38 parts1 - 2 layers89 × 53 mm
- 2 layers65 × 56 mm
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
