4 layers10.7 × 20.8 mm
4 layers180.9 × 110 mm
Waveshaper Marcin
michalelektryk/NoA-SSH8Noise of Antimatter - Subshaper
- Size
- 180.9 × 110 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 223
- Nets
- 148
- Pads
- 654
- Tracks, vias
- 2,023, 498
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 May 2024
- Updated
- 23 May 2024
Overview
Waveshaper Marcin is an open-source printed circuit board by michalelektryk, from the michalelektryk/NoA-SSH repository on GitHub. It is a 4-layer board of 180.9 × 110 mm with 223 parts on 148 nets, routed with 2,023 tracks and 498 vias.
It is built around the SLG46824V, TL072 and AP331AWG, with the CD4053BE and BAT54S among its other parts. Its parts include 78 resistors, 70 capacitors, 20 connectors, 17 ICs and 10 diodes.
Main components
5
SLG46824V
STQFN-20(2x3)-40℃~+85℃ Other PLDs STQFN-20(2x3) Programmable Logic Device (CPLDs/FPGAs) ROHSRenesas ElectronicsProgrammable Logic Device (CPLDs/FPGAs)
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
AP331AWG
SOT-25-18V~-1V、1V~18V 0℃~+70℃ 1 1.3us 150nA 2V~36V 300ns 36V 400uA 4mV 70nA DTL、TTL、CMOS、ECL、MOS SOT-25 Comparators ROHSDiodes IncorporatedComparators
CD4053BE
DIP-16-40℃~+85℃ 0.2pF 2:1 3 3V~15V 7ns 90Ω Bidirectional analog channel、Level shifting、Glitch-free switching DIP-16 Analog Switches, Multiplexers ROHSHGSEMIAnalog Switches, Multiplexers
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdNoise of Antimatter - Subshaper
disclaimer
This repository contains all files required to make or repair the SSH. The following files are provided as is, with no responsibility. They're provided for personal use only. If you'd like to sell anything made out of them feel free to ping me, I'm mostly ok, as long as you're not big company scamming small manufacturers :)
Module description
SSH is 16HP triple waveshaper with subharmonicon and sequencer. It's versatile tool for enriching sound sources and animating voices. More information can be found on the webpage or by checking out the demo.
File structure
- electronics design can be found in folder electronics
- schematic.pdf is useful for quick look. For editing and deep dive full kicad design is provided. Project was done in kicad 6 but seems to work equally well in 7/8
- CPDL firmware is provided in folder greenpak
- the device hides all complex digital logic into two greenpak CPLDs.
- Their configuration and ESP32 software used for flashing are here
- panel design can be found in folder panel
- panel has been designed as 3d model in openSCAD. Two projections are available for CNC production. Additionally, stls for dual color printing are provided
- manual generating files and pdf can be found in manual
- It's written in LaTeX. For people who don't know LaTeX I recommend you read about it, especially if you're doing group projects and need to git proper documents
Parts
223| Qty | Value | Footprint | References |
|---|---|---|---|
| 47 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R16, R17, R18, R19, R20, R21, R22, R23, R26 +31 |
| 30 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C18, C19, C20, C21, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33 +14 |
| 20 | 10u | Capacitor_SMD:C_0805_2012Metric | C5, C6, C10, C12, C13, C52, C53, C54, C55, C56, C57, C62, C63, C64, C65, C66 +4 |
| 15 | 47p | Capacitor_SMD:C_0603_1608Metric | C14, C15, C16, C17, C22, C23, C34, C49, C50, C51, C68, C69, C70, C71, C72 |
| 11 | 10k | Resistor_SMD:R_0603_1608Metric | R24, R25, R31, R40, R41, R42, R44, R45, R55, R75, R76 |
| 10 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4, U5, U7, U8, U11, U12, U15 |
| 9 | 1k | Resistor_SMD:R_0603_1608Metric | R27, R28, R29, R30, R32, R37, R46, R67, R77 |
| 9 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3, D4, D5, D7, D8, D9, D10 |
| 7 | AudioJack2_SwitchT | jacks:thonkiconn | J6, J7, J8, J9, J10, J11, J12 |
| 6 | 400 | Resistor_SMD:R_0603_1608Metric | R56, R58, R65, R68, R70, R74 |
| 5 | 1u - test | Capacitor_SMD:C_1210_3225Metric | C3, C58, C59, C60, C61 |
| 5 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 47k | Resistor_SMD:R_0603_1608Metric | R15, R38, R39, R78 |
| 4 | MountingHole | learning:SS-16F03_cutout | H1, H2, H3, H4 |
| 3 | 10k | learning:Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV3, RV5 |
| 3 | param | learning:Potentiometer_Alps_RK09K_Single_Vertical | RV2, RV4, RV6 |
| 2 | CVs | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J19, J20 |
| 2 | Polyfuse | Fuse:Fuse_0805_2012Metric | F1, F2 |
| 2 | SLG46824 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U13, U16 |
| 2 | gates | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13, J14 |
| 2 | out+switch | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J15, J16 |
| 2 | powers | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J17, J18 |
| 1 | 250k | Resistor_SMD:R_0603_1608Metric | R43 |
| 1 | AP331A | Package_TO_SOT_SMD:SOT-23-5 | U17 |
| 1 | AS3363 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | BV199 | Package_TO_SOT_SMD:SOT-23 | D6 |
| 1 | CD4053B | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U14 |
| 1 | CV1 | jacks:thonkiconn | J1 |
| 1 | CV2 | jacks:thonkiconn | J2 |
| 1 | CV3 | jacks:thonkiconn | J3 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.00mm:PinHeader_2x03_P2.00mm_Vertical | J5 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J4 |
| 1 | HT75xx-1-SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U9 |
| 1 | L79L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U10 |
| 1 | bank_switch | switches:TSM1x3 | SW1 |
| 1 | channel_1 | learning:SS-16F03 | S2 |
| 1 | channel_2 | learning:SS-16F03 | S3 |
| 1 | channel_3 | learning:SS-16F03 | S4 |
| 1 | fill_switch | learning:SS-16F03 | S1 |
| 1 | gain | learning:Potentiometer_Alps_RK09K_Single_Vertical | RV8 |
Questions
How big is the Waveshaper Marcin PCB?
It measures 180.9 × 110 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Waveshaper Marcin use?
223 parts, built around the SLG46824V, TL072, AP331AWG and CD4053BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Waveshaper Marcin KiCad files?
From the michalelektryk/NoA-SSH repository on GitHub, at the commit this page was made from: the board is electronics/waveshaper_Marcin.kicad_pcb and its schematic electronics/CLK_in.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Waveshaper Marcin design in my own project?
Its repository states no licence, so its author keeps all rights: ask michalelektryk before reusing the design.
Similar boards
- 2 layers253 × 199.4 mm
- 6 layers124.5 × 135.4 mm
MicroZed carrier board v4
viktor-nikolov/MicroZed-carrier-board
MicroZed development carrier board
116 parts7CC0-1.0 - 4 layers100.3 × 101.6 mm
MicroZed IntanInterface-2Layer
kemerelab/MicroZedIntanInterface
Repository with work in process Microzed projects
114 parts3MIT - 4 layers218.4 × 101.5 mm
- 2 layers147.4 × 63.2 mm
Guitar down octave
MR-DOS/guitar_down_octave
A octave-down effect for guitar. All analog, no microcontroller, no DSP.
219 parts5GPL-3.0 - 2 layers233.9 × 128.5 mm
TM LPG MIX MK3
kuangmk11/TM_LPG-MIX_MK3
A Missing Mile Modular fork of clarionut/TMLPG-MIX, which is itself a variant of the TM-LPG-X expander and the original Turing Machine Vactrol Mix expander.
89 parts - 4 layers284 × 185.5 mm
