2 layers99.1 × 76.2 mm
Ssr
Miceuz/triac-bloc
An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
39 parts54
2 layers106.7 × 83.8 mm
Controller
Miceuz/triac-bloc54An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
- Size
- 106.7 × 83.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 25
- Pads
- 85
- Tracks, vias
- 86, 0
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 18 Apr 2013
- Updated
- 18 Feb 2020
Overview
Controller is an open-source printed circuit board by Miceuz, from the Miceuz/triac-bloc repository on GitHub. It is a 2-layer board of 106.7 × 83.8 mm with 23 parts on 25 nets, routed with 86 tracks and 0 vias.
It is built around the ATTINY1634-SU, SP3485CN-L and P82B96D. Its parts include 7 capacitors, 7 resistors, 3 ICs, 2 connectors and 2 switches. It belongs with the home automation and IoT boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY1634-SU
SOIC-20-300mil-40℃~+85℃ 1.8V~5.5V 10bit 12MHz 16KB 18 1KB 256Byte 8 Bit AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)
SP3485CN-L
SOIC-80℃~+70℃ 1 1 10Mbps 3V~3.6V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSMaxLinearRS-485 / RS-422 ICsP82B96D
SOIC-8-40℃~+85℃ 2 2-Wire Bus 2-Wire Bus 2V~15V 4pF 70ns Buffer SOIC-8 Signal Buffers, Repeaters, Splitters ROHSTexas InstrumentsSignal Buffers, Repeaters, Splitters
README
README.mdtriac-bloc
A universal power block based on triac. In essence this is a high power solid state relay augmented with some bells and whistles.
Bells and whistles:
- Attiyny44 MCU on board
- I2C interface
- maximum power - 6kW
- zero crossing detection
- controllable via I2C protocol
- phase shift dimmer mode
- linear output power control
- switch at zero-crossing mode
- output filtering for dimmer mode
- snubber network
- “low level” zero-crossing signal output
- “low level” triac trigger signal input
- 4 spare MCU pins available for additional features
- open source hardware and firmware
More info available at: http://wemakethings.net/2013/10/27/triac-bloc/
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | SM0603_Capa | C3, C4, C5, C6, C7 |
| 4 | R | SM0603_Resistor | R2, R3, R6, R7 |
| 2 | 10k | SM0603_Resistor | R1, R4 |
| 2 | 22p | SM0603_Capa | C1, C2 |
| 1 | 120 | SM0603_Resistor | R5 |
| 1 | 16MHz | HC-49V | X1 |
| 1 | ATTINY1634-S | SO20L | IC1 |
| 1 | AVR-ISP-6 | pin_array_3x2 | CON1 |
| 1 | I2C | PIN_ARRAY_4x1 | P1 |
| 1 | JUMPER | PINHEAD1-2 | JP1 |
| 1 | P82B96 | SO8N | U1 |
| 1 | RS458 | PINHEAD1-3 | K1 |
| 1 | SP3485CN | SO8N | IC2 |
| 1 | SW_PUSH | SW_PUSH_SMALL | SW1 |
Questions
How big is the Controller PCB?
It measures 106.7 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
23 parts, built around the ATTINY1634-SU, SP3485CN-L and P82B96D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the Miceuz/triac-bloc repository on GitHub, at the commit this page was made from: the board is controller-attiny1634/controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask Miceuz before reusing the design.
More from Miceuz/triac-bloc
2- 2 layers106.7 × 83.8 mm
Controller
Miceuz/triac-bloc
An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
27 parts54
Similar boards
- 2 layers27.4 × 1.3 mm
Thermocouple attiny1634
Miceuz/thermocouple-modbus
Thermocouple frontend accessible via industrial modbus protocol
40 parts2 - 2 layers65 × 58 mm
- 2 layers99.1 × 99.1 mm
Connector test stand
L0czek/rakieta
The starter board provides the ignition impulse to fire the engine. It includes an I2C IO expander and an 8-channel digital comparator to require a correct safety byte/address to be present before firing.
86 parts - 4 layers426 × 182.3 mm
- 2 layers50 × 100 mm
- 2 layers50 × 50 mm
Alimentatore
CarloMara/didactic-octo-PSU
So, @nicogela and I decided to build a LAB PSU, but because we're lazy people and we don't like to carry weight we're tring to unite the high efficiency of the switching topologies to the high stability and low noise of…
67 parts - 2 layers65 × 30.1 mm
- 2 layers80 × 132 mm
