2 layers113.5 × 70.5 mm
2 layers42 × 72 mm
Scanner
Miceuz/door-controlAn entrance to hackerspace control system
- Size
- 42 × 72 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 14
- Pads
- 53
- Tracks, vias
- 109, 14
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170922)
- Created
- 18 Dec 2017
- Updated
- 18 Dec 2017
Overview
Scanner is an open-source printed circuit board by Miceuz, from the Miceuz/door-control repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 42 × 72 mm with 15 parts on 14 nets, routed with 109 tracks and 14 vias.
It is built around the ADM3491AN and R-783.3-0.5. Its parts include 6 resistors, 3 capacitors, 2 ICs, 2 connectors and 1 diode.
Main components
2README
README.mddoor-control
An entrance to hackerspace control system
randominis minčių kratinys
- Du maitinimo blokai - vienas, 5V maitina ESP32 plokštę, kitas, 12V - "purvinąją" pusę X* Iš 5V patempti už kojos tranzistorių ir sekti, ar yra 5V maitinimas X* Iš 12V per optoporą patempti tranzistorių ir sekti, ar yra 12V maitinimas X* RS485 izoliuotas per AD2482/AD2487
- Išlituoti barrel lizdą įlituoti screw term http://www.mouser.com/pdfdocs/Bourns_RS485_AppNote.pdf
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R_Small | Resistors_SMD:R_0603 | R1, R2, R3, R4 |
| 3 | 1u | Capacitors_SMD:C_0603 | C1, C2, C3 |
| 2 | Resistors_SMD:R_0603 | R5, R6 | |
| 1 | ADM3491 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U2 |
| 1 | Buzzer | bilge-alarm-parts:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J2 |
| 1 | Conn_01x10 | TerminalBlock_WAGO:TerminalBlock_WAGO-804_RM5mm_10pol | J1 |
| 1 | LED | LEDs:LED_0603 | D1 |
| 1 | R-783.3-0.5 | Converters_DCDC_ACDC:DCDC-Conv_RECOM_R-78E-0.5 | U1 |
Questions
How big is the Scanner PCB?
It measures 42 × 72 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Scanner use?
15 parts, built around the ADM3491AN and R-783.3-0.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Scanner KiCad files?
From the Miceuz/door-control repository on GitHub, at the commit this page was made from: the board is scanner/scanner.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Scanner design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Miceuz/door-control
1Similar boards
- 2 layers33 × 90 mm
- 2 layers228.6 × 152.4 mm
- 2 layers17.8 × 35.6 mm
- 2 layers85 × 70 mm
- 4 layers74.9 × 62.2 mm
- 4 layers50 × 50 mm
- 2 layers123.5 × 79.5 mm
Projet mecatronique
Mickael235/pic16-biometric-access-control
Biometric access-control system based on PIC16F88, SFM3050-TC1 fingerprint sensing, RS232 communication, relay control, KiCad PCB design and SolidWorks enclosure.
45 parts - 2 layers32.5 × 25.1 mm
Ledstrip controller
wipmate/electronics
A collection of small ESP32-powered PCBs for use in smart home appliances.
16 parts