2 layers68 × 42 mm
2 layers54.1 × 48.6 mm
E Fidget V3
miameows/E-Fidget6Hi there! There's a lot of moving parts with this project right now, so why don't you check out my latest blog post for more info?
- Size
- 54.1 × 48.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 32
- Pads
- 110
- Tracks, vias
- 329, 51
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Aug 2022
- Updated
- 27 Aug 2023
Overview
E Fidget V3 is an open-source printed circuit board by miameows, from the miameows/E-Fidget repository on GitHub, published under the MIT licence. It is a 2-layer board of 54.1 × 48.6 mm with 29 parts on 32 nets, routed with 329 tracks and 51 vias.
It is built around the ATTINY841-MMH, BAT54J and DMG2302U, with the WAFER-PH2.0-2PWB and WS2812B among its other parts. Its parts include 7 resistors, 5 diodes, 3 capacitors, 3 ICs and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATTINY841-MMH
VQFN-20-EP(3x3)-40℃~+85℃ 1.7V~5.5V 10bit 12 16MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog VQFN-20-EP(3x3) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BAT54J
SOD-323F1 Independent 200mA 2uA@25V 30V 600mA 800mV@100mA SOD-323F Schottky Diodes ROHSNexperiaSchottky Diodes
DMG2302U
SOT-23-55℃~+150℃ 1 N-channel 120mΩ@4.5V 1V 20V 4.2A 57.7pF 594.3pF 64.5pF 7nC@4.5V 800mW SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
WAFER-PH2.0-2PWB
SMD,P=2mm,卧贴-25℃~+85℃ 1 1x2P 2 250V 2A 2P 2mm 5.6mm 7.59mm 8mm Auxiliary Solder Pin Beige Brass LCP PH Surface Mount, Right Angle Tin SMD,P=2mm,卧贴 Wire To Board Connector ROHSXUNPUWire To Board Connector
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdE-Fidget
Hi there! There's a lot of moving parts with this project right now, so why don't you check out my latest blog post for more info?
Thanks :)
- Micha
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R5, R6, R7 |
| 3 | BAT54J | Diode_SMD:D_SOD-323F | D3, D4, D5 |
| 3 | DMG2302U | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | Motor_DC | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | M1, M2, M3 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | ATtiny841-MM | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm | U3 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | ORANGE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | TC1185-xCT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
| 1 | WAFER-PH2.0-2PWB | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | BT1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
Questions
How big is the E Fidget V3 PCB?
It measures 54.1 × 48.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the E Fidget V3 use?
29 parts, built around the ATTINY841-MMH, BAT54J, DMG2302U and WAFER-PH2.0-2PWB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the E Fidget V3 KiCad files?
From the miameows/E-Fidget repository on GitHub, at the commit this page was made from: the board is Hardware/E-Fidget V3.kicad_pcb and its schematic Hardware/E-Fidget V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the E Fidget V3 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers74.1 × 130 mm
- 2 layers69 × 72 mm
MMv3
MrCroesus/MMv3
MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.
47 parts16Apache-2.0 - 2 layers99.5 × 124.8 mm
B Sides 2024
OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences
151 parts3 - 4 layers85 × 56 mm
- 2 layers39.3 × 30.1 mm
- 4 layers103.1 × 71.1 mm
- 2 layers90 × 58 mm
