mhorimoto/Q930TWE ARIA を用いた加速度センサ
Q930 is an open-source printed circuit board by mhorimoto, from the mhorimoto/Q930 repository on GitHub, published under the MIT licence. It is a 2-layer board with 16 parts on 36 nets.
It is built around the SEN-14480, SHT40I-AD1B-R2 and DRV5032FDDMRR, with the TPL5010DDCR and CR2032 among its other parts. Its parts include 5 ICs, 4 resistors, 3 capacitors, 2 diodes and 1 connector.
TWE ARIA を用いた加速度センサ
https://mono-wireless.com/jp/products/twelite-aria/index.html
これと
https://www.digikey.jp/ja/products/detail/sparkfun-electronics/SEN-14480/8032538
これを使用する。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
| 2 | 3.3k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2 |
| 1 | 1SS387CT_L3FT | q930:CST2_TOS | D1 |
| 1 | 27k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R4 |
| 1 | 470 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R3 |
| 1 | 7Pin | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | CR2032 | Battery:BatteryHolder_MPD_BC2003_1x2032 | BT1 |
| 1 | DRV5032FDDMRR | q930:DMR0004A | U2 |
| 1 | LB Q39E-L2OO-35-1 | q930:LED_LBQ39E_OSR | LED1 |
| 1 | MW-R-WX | RF_Module:MonoWireless_TWE-L-WX | U1 |
| 1 | SEN-14480 | q930:SEN-14480 | U5 |
| 1 | SHT40I-AD1B-R2 | q930:SHT40I_SEN | U3 |
| 1 | TPL5010DDCR | q930:DDC0006A_L | U4 |
16 parts, built around the SEN-14480, SHT40I-AD1B-R2, DRV5032FDDMRR and TPL5010DDCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mhorimoto/Q930 repository on GitHub, at the commit this page was made from: the board is Q930.kicad_pcb and its schematic Q930.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Takingo/Mypcb35
OmniCircuit AI is a local proof of concept for an autonomous PCB/PCBA design and manufacturing suite. The current implementation focuses on the ESP32-S3 + DWM3000 UWB Anchor example and establishes the architecture for:
EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...
Open-Air-Foundation/pcb-go
AirGradient GO is a handheld air quality monitor. It measures particulate matter (Sensirion SPS30), CO₂ (Senseair S12), VOC/NOx (SGP41), temperature and humidity (SHT4x), and barometric pressure (DPS368), with an…
haum2002/EWP-Control
SmartCoolingv2.1 menggabungkan firmware SmartCooling dengan reka bentuk EWP Controller ini. RP2350B kekal sebagai pengawal keselamatan dan actuator kritikal, manakala ESP32-S3 mengurus UI, Wi-Fi, BLE, diagnostik dan…
NOAA-PMEL/ASVCO2
Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system
