

MotorDriver
高専ロボコン2025のために製作した基板
- Size
- 70 × 45 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 108
- Pads
- 393
- Tracks, vias
- 905, 851
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Mar 2025
- Updated
- 16 Mar 2026
Overview
MotorDriver is an open-source printed circuit board by mgsin30, from the mgsin30/Robocon2025-PCB repository on GitHub. It is a 4-layer board of 70 × 45 mm with 126 parts on 108 nets, routed with 905 tracks and 851 vias.
It is built around the CH340E, MCP25612FD-E/SL and IR2302PBF, with the TLP2348(E, NJM7812SDL1-TE1 and TLP293(E among its other parts. Its parts include 40 resistors, 26 capacitors, 16 diodes, 12 ICs and 8 connectors. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
7CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersMCP25612FD-E/SL
SOIC-14-40℃~+125℃ 15uA 2 4.5V~5.5V 70mA 8Mbps CAN FD Transceiver SOIC-14 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversIR2302PBF
PDIP-8-40℃~+150℃ 130ns 1mA 2 200mA 350mA 50ns 5V~20V Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge IGBT、MOSFET PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate Drive ICsTLP2348(E
SO-6,5LEADSO-6,5LEAD Logic Output Optoisolators ROHSToshibaLogic Output OptoisolatorsNJM7812SDL1-TE1
TO-252-40℃~+125℃ 1 1.5A 12V 2.2V@(1.5A) 35V 6mA 71dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSNisshinbo Micro Devices Inc.Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTLP293(E
SOP-4SOP-4 Transistor, Photovoltaic Output Optoisolators ROHSToshibaTransistor, Photovoltaic Output OptoisolatorsTLV1117-33DCY
UncategorisedTexas Instruments
README
XT60Hub/README.mdXT60 Hub
1つの入力を5つの出力に分岐させる XT60 コネクタのハブ

変更履歴
ver1.0 (発注日:2025/04/12)
- 初回完成
ver1.1 (完成日:2025/09/10)
- 基板の外形を編集
- 基板取付穴の位置を微調整
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3, C7, C9, C14, C15, C19, C20, C21, C23, C24, C25, C26 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R19, R20, R24, R25, R29, R30, R39, R40 |
| 6 | 80 | Resistor_SMD:R_0603_1608Metric | R8, R9, R16, R17, R26, R27 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R3, R31, R32, R35 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 1000p | Capacitor_SMD:C_0603_1608Metric | C8, C11, C12 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C2, C4, C18 |
| 3 | 420 | Resistor_SMD:R_0603_1608Metric | R1, R22, R23 |
| 2 | 1.5k | Resistor_SMD:R_0603_1608Metric | R11, R18 |
| 2 | 10k | Anan-Robo_Footprint_Library:ST-4ETB103 | RV1, RV2 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | 2.5u | Capacitor_SMD:C_0603_1608Metric | C10, C13 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 330u | Capacitor_SMD:CP_Elec_10x10.5 | C5, C6 |
| 2 | 350 | Resistor_SMD:R_0603_1608Metric | R36, R37 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R33, R34 |
| 2 | D | Diode_SMD:Nexperia_CFP3_SOD-123W | D1, D15 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123 | D7, D12 |
| 2 | IR2302 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6 |
| 2 | Polyfuse | Anan-Robo_Footprint_Library:MF-FSMF | F1, F2 |
| 2 | Q_NMOS | Anan-Robo_Footprint_Library:Vishay_PowerPAK_8x8L_Dual | Q1, Q2 |
| 2 | TLP2348 | Package_SO:SO-5-6_4.55x3.7mm_P1.27mm | U11, U12 |
| 1 | 0.33u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 13k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 18k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 3.7k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 300 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 430 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 600 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 660 | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | BATT | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | CAN | Connector_IDC:IDC-Header_2x03_P2.54mm_Horizontal | J1 |
| 1 | CAN_R | Anan-Robo_Footprint_Library:SLW | SW1 |
| 1 | CAN_R | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | CAN_RX | LED_SMD:LED_0603_1608Metric | D14 |
| 1 | CAN_TX | LED_SMD:LED_0603_1608Metric | D13 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U10 |
| 1 | CZ-3A05 | Anan-Robo_Footprint_Library:CZ3A | U4 |
| 1 | Crystal_GND2 | Anan-Robo_Footprint_Library:XRCGB | Y1 |
| 1 | DATA | LED_SMD:LED_0603_1608Metric | D16 |
| 1 | Debug | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J8 |
| 1 | ENC | Anan-Robo_Footprint_Library:SM05B-PASS-TBx | J2 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LED_GRB | LED_SMD:LED_ROHM_SMLVN6 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MA | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | MB | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | MCP2561/2FD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | MCP2561/2FD selector | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP4 |
| 1 | Motor | Anan-Robo_Footprint_Library:XT60PW-F_Horizontal | J6 |
| 1 | MountingHole | Anan-Robo_Footprint_Library:Aho_new_S | H7 |
| 1 | MountingHole | Anan-Robo_Footprint_Library:Aho_old_S | H6 |
| 1 | MountingHole | Anan-Robo_Footprint_Library:Title | H5 |
| 1 | MountingHole | Anan-Robo_Footprint_Library:Info_M_3 | H8 |
| 1 | NJM7812SDL1 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | OCD | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | OCD1 | LED_SMD:LED_0603_1608Metric | D10 |
| 1 | OCD2 | LED_SMD:LED_0603_1608Metric | D11 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:TSOT-23 | Q3 |
| 1 | RESET | Anan-Robo_Footprint_Library:TVAF06-A020B-R | SW3 |
| 1 | STM32F303K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U8 |
| 1 | SW1 | Anan-Robo_Footprint_Library:SM02B-PASS-TBx | J3 |
| 1 | SW1 | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | SW2 | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | SW2 | Anan-Robo_Footprint_Library:SM02B-PASS-TBx | J4 |
| 1 | SWD | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7 |
| 1 | SW_Coded | Anan-Robo_Footprint_Library:RDS-1055-SMT | SW2 |
| 1 | TLP293 | Package_SO:SOIC-4_4.55x2.6mm_P1.27mm | U7 |
| 1 | TLV1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Up/Down | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | VIN | Anan-Robo_Footprint_Library:XT60PW-M_Horizontal | J5 |
More from mgsin30/Robocon2025-PCB
12- 4 layers100 × 65 mm

- 4 layers70 × 45 mm

- 4 layers70 × 45 mm

- 2 layers70 × 45 mm

- 2 layers70 × 45 mm

- 2 layers60 × 40 mm

- 2 layers60 × 58 mm

- 2 layers70 × 40 mm

- 2 layers100 × 57 mm

- 2 layers60 × 42.5 mm

- 2 layers84.8 × 32.6 mm

- 2 layers35 × 33 mm

Similar boards
- 2 layers60 × 45 mm

- 4 layers90 × 50 mm

- 2 layers112.5 × 85.5 mm

- 2 layers143.7 × 76.6 mm

- 2 layers72 × 47.5 mm

- 2 layers80 × 40 mm

- 2 layers80 × 60 mm

- 2 layers95 × 72 mm

Questions
How big is the MotorDriver PCB?
It measures 70 × 45 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MotorDriver use?
126 parts, built around the CH340E, MCP25612FD-E/SL, IR2302PBF and TLP2348(E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorDriver KiCad files?
From the mgsin30/Robocon2025-PCB repository on GitHub, at the commit this page was made from: the board is MotorDriver/MotorDriver.kicad_pcb and its schematic CANBusHub/CANBusHub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask mgsin30 before reusing the design.