Skip to the content
2 layers100 × 57 mmCANBusHub, the printed circuit board in 3D

高専ロボコン2025のために製作した基板

Size
100 × 57 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
21
Pads
111
Tracks, vias
193, 46
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Mar 2025
Updated
16 Mar 2026

Overview

CANBusHub is an open-source printed circuit board by mgsin30, from the mgsin30/Robocon2025-PCB repository on GitHub. It is a 2-layer board of 100 × 57 mm with 28 parts on 21 nets, routed with 193 tracks and 46 vias.

Its parts include 9 connectors, 8 switches, 3 resistors and 1 diode.

README

XT60Hub/README.md

XT60 Hub

1つの入力を5つの出力に分岐させる XT60 コネクタのハブ

表面 表面

変更履歴

ver1.0 (発注日:2025/04/12)

  • 初回完成

ver1.1 (完成日:2025/09/10)

  • 基板の外形を編集
  • 基板取付穴の位置を微調整

Parts

28
QtyValueFootprintReferences
5MountingHole_PadMountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3, H4, H5
4CAN1/2Anan-Robo_Footprint_Library:SLWSW1, SW2, SW3, SW4
4SW_DPDT_x2Anan-Robo_Footprint_Library:SLWSW5, SW6, SW7, SW8
25.1kResistor_SMD:R_0603_1608MetricR2, R3
1430Resistor_SMD:R_0603_1608MetricR1
1CAN1_INAnan-Robo_Footprint_Library:PAコネクタ(4ピンサイド型)J1
1CAN1_OUTAnan-Robo_Footprint_Library:PAコネクタ(4ピンサイド型)J7
1CAN2_INAnan-Robo_Footprint_Library:PAコネクタ(4ピンサイド型)J2
1CAN2_OUTAnan-Robo_Footprint_Library:PAコネクタ(4ピンサイド型)J8
1CAN_OUT1Connector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ3
1CAN_OUT2Connector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ4
1CAN_OUT3Connector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ5
1CAN_OUT4Connector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ6
1MountingHoleAnan-Robo_Footprint_Library:TitleH6
1MountingHoleAnan-Robo_Footprint_Library:Info_MH7
1PWRLED_SMD:LED_0603_1608MetricD1
1PWR_INConnector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_HorizontalJ11

More from mgsin30/Robocon2025-PCB

12
  • 4 layers100 × 65 mmPowerBoard, the printed circuit board in 3D

    PowerBoard

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    144 parts
  • 4 layers70 × 45 mmSolenoidDriver, the printed circuit board in 3D

    SolenoidDriver

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    129 parts
  • 4 layers70 × 45 mmMotorDriver, the printed circuit board in 3D

    MotorDriver

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    126 parts
  • 4 layers70 × 45 mmPWMBoard, the printed circuit board in 3D

    PWMBoard

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    94 parts
  • 2 layers70 × 45 mmGPIOBoard, the printed circuit board in 3D

    GPIOBoard

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    93 parts
  • 2 layers70 × 45 mmRoboMasterBoard, the printed circuit board in 3D

    RoboMasterBoard

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    89 parts
  • 2 layers60 × 40 mmUSB CANBoard, the printed circuit board in 3D

    USB CANBoard

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    75 parts
  • 2 layers60 × 58 mmConverterBoard, the printed circuit board in 3D

    ConverterBoard

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    59 parts
  • 2 layers70 × 40 mmLEDBoard, the printed circuit board in 3D

    LEDBoard

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    29 parts
  • 2 layers84.8 × 32.6 mmXT60Hub, the printed circuit board in 3D

    XT60Hub

    mgsin30/Robocon2025-PCB

    高専ロボコン2025のために製作した基板

    26 parts

Similar boards

  • 2 layers44.5 × 72.7 mmOSO SWAT C1-jig, the printed circuit board in 3D

    OSO SWAT C1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    28 parts2.1k
  • 2 layers95 × 54 mmEinkPDA screen, the printed circuit board in 3D

    EinkPDA screen

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    28 parts2kApache-2.0
  • 2 layers45 × 45 mmSmartbuttons, the printed circuit board in 3D

    Smartbuttons

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    28 parts915
  • 2 layers24.1 × 36.2 mmEsp32miniBT, the printed circuit board in 3D

    Esp32miniBT

    asterics/esp32_mouse_keyboard

    ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

    28 parts911GPL-3.0
  • 2 layers34.8 × 12.2 mmInfnoise goldfingers, the printed circuit board in 3D

    Infnoise goldfingers

    waywardgeek/infnoise

    The world's easiest TRNG to get right

    28 parts854CC0-1.0
  • 2 layers55.9 × 99.1 mmStm32f0 disco Luos shield, the printed circuit board in 3D

    Stm32f0 disco Luos shield

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    28 parts546MIT
  • 2 layers88 × 25 mmEleLab v2 Frontpanel a, the printed circuit board in 3D

    EleLab v2 Frontpanel a

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    28 parts531GPL-3.0

Questions

How big is the CANBusHub PCB?

It measures 100 × 57 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CANBusHub use?

28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CANBusHub KiCad files?

From the mgsin30/Robocon2025-PCB repository on GitHub, at the commit this page was made from: the board is CANBusHub/CANBusHub.kicad_pcb and its schematic CANBusHub/CANBusHub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CANBusHub design in my own project?

Its repository states no licence, so its author keeps all rights: ask mgsin30 before reusing the design.