Skip to the content
2 layers97 × 97.8 mmPCB (KiCAD), the printed circuit board in 3D

PCB (KiCAD)

mgamota2/PicoW
Size
97 × 97.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
90
Pads
255
Tracks, vias
472, 64
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
13 Jun 2023
Updated
10 Oct 2024

Overview

PCB (KiCAD) is an open-source printed circuit board by mgamota2, from the mgamota2/PicoW repository on GitHub. It is a 2-layer board of 97 × 97.8 mm with 67 parts on 90 nets, routed with 472 tracks and 64 vias.

It is built around the UWF1215S-3WR3 and L293D. Its parts include 16 capacitors, 8 ICs, 7 resistors, 6 diodes and 1 connector. It belongs with the RP2040 boards of this library.

Main components

2

README

README.md

picoW

Raspberry Pi Pico W Projects

Overview

All of these projects are personal projects which I have completed and implemented. Justifications and media can be found on my github.io page. I have found the Pico W to be an extremely versatile platform for the development of all kinds of embedded systems projects. All of these projects use the on-board WiFi chip.

Parts

67
QtyValueFootprintReferences
28TestPointTestPoint:TestPoint_Pad_2.5x2.5mmG1L1, G1L2, G1M1, G1M2, G1R1, G1R2, G2L1, G2L2, G2M1, G2M2, G2R1, G2R2, G3L1, G3L2, G3M1, G3M2 +12
70.1uFCapacitor_SMD:C_1210_3225MetricC2, C5, C6, C7, C11, C12, C16
71uFCapacitor_SMD:C_1210_3225MetricC3, C8, C9, C10, C13, C14, C15
7L293DPackage_DIP:DIP-16_W7.62mmU1, U3, U4, U5, U6, U7, U8
6300Resistor_SMD:R_1210_3225MetricR1, R2, R3, R4, R5, R6
6LEDLED_SMD:LED_1812_4532MetricD1, D2, D3, D4, D5, D6
1100kResistor_SMD:R_1210_3225MetricR7
1100uFCapacitor_SMD:C_1210_3225MetricC1
110uFCapacitor_SMD:C_1210_3225MetricC4
1694106301002SamacSys_Parts:694106301002_1J1
1PicoMCU_RaspberryPi_and_Boards:RPi_Pico_SMD_THU2
1UWF1215S-3WR3UWF1215S-3WR3:CONV_UWF1215S-3WR3PS1

More from mgamota2/PicoW

3

Similar boards

  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers84.3 × 58.4 mmEnocderDriver, the printed circuit board in 3D

    EnocderDriver

    NikodemBartnik/Small-Projects

    All of smaller projects (Arduino, PCBs, electronics, code)

    35 parts55
  • 2 layers56.4 × 72.6 mmRas pi hat, the printed circuit board in 3D

    Ras pi hat

    geno543/Redropi_highway

    the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…

    8 parts13
  • 2 layers87.5 × 70 mmLaberinto, the printed circuit board in 3D

    Laberinto

    CRM-UAM/CRMaze

    Open source robot for maze solving + line following

    34 parts12
  • 2 layers92.5 × 62.5 mmDropGenPCB, the printed circuit board in 3D

    DropGenPCB

    harrislab-brown/DropGen

    DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.

    25 parts12CC-BY-SA-4.0
  • 2 layers47.5 × 49.5 mmElectronic, the printed circuit board in 3D

    Electronic

    zosko/magspoof

    Magspoof with Arduino Pro Micro

    5 parts11
  • 2 layers120.7 × 184.1 mmBeachRover circuit, the printed circuit board in 3D

    BeachRover circuit

    wizardofrobots/roverCode

    Jetson Nano powered Arduino Rover

    11 parts10
  • 2 layers90 × 53.4 mmOpenOx, the printed circuit board in 3D

    OpenOx

    hacklabkyiv/openox-pcb

    PCB design for OpenOx - open source oxygen concentrator

    43 parts7GPL-3.0

Questions

How big is the PCB (KiCAD) PCB?

It measures 97 × 97.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PCB (KiCAD) use?

67 parts, built around the UWF1215S-3WR3 and L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCB (KiCAD) KiCad files?

From the mgamota2/PicoW repository on GitHub, at the commit this page was made from: the board is TrainControl/PCB (KiCAD)/RevisedControlBoard/RevisedControlBoard/RevisedControlBoard.kicad_pcb and its schematic TrainControl/PCB (KiCAD)/ControlBoard/ControlBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCB (KiCAD) design in my own project?

Its repository states no licence, so its author keeps all rights: ask mgamota2 before reusing the design.