
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

mini 4band equalizer PCB
BassPre is an open-source printed circuit board by mesotokyo, from the mesotokyo/4band_eq repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 80 × 25 mm with 42 parts on 25 nets, routed with 237 tracks and 15 vias.
It is built around the TL072. Its parts include 15 resistors, 13 capacitors, 3 ICs and 3 connectors.
mini-size 4band equalizer PCB.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C8 |
| 4 | MountingHole_3mm | Mounting_Holes:MountingHole_3mm | , , , |
| 3 | 10k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R16, R22 |
| 3 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P1, P2, P3 |
| 3 | TL072 | Housings_DIP:DIP-8_W7.62mm_Socket | U1, U2, U3 |
| 2 | 1M | Resistors_SMD:R_0805_HandSoldering | R5, R10 |
| 2 | 1k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R19 |
| 2 | 1u | Capacitors_SMD:C_1206_HandSoldering | C4, C5 |
| 2 | 200k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R20, R21 |
| 2 | 22n | Capacitors_ThroughHole:C_Rect_L7.0mm_W2.5mm_P5.00mm | C6, C13 |
| 2 | 47k | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | 50k | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | RV1, RV2 |
| 1 | 100k | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 100k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 10n | Capacitors_ThroughHole:C_Rect_L7.0mm_W2.5mm_P5.00mm | C7 |
| 1 | 10u | Capacitors_SMD:CP_Elec_5x5.3 | C12 |
| 1 | 2.2n | Capacitors_ThroughHole:C_Rect_L7.0mm_W2.5mm_P5.00mm | C10 |
| 1 | 250k | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | RV3 |
| 1 | 33n | Capacitors_ThroughHole:C_Rect_L7.0mm_W2.5mm_P5.00mm | C9 |
| 1 | 470 | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18 |
| 1 | NC | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | NC | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | RV4 |
| 1 | NC | Capacitors_ThroughHole:C_Rect_L7.0mm_W2.5mm_P5.00mm | C11 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 80 × 25 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mesotokyo/4band_eq repository on GitHub, at the commit this page was made from: the board is BassPre.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).