2 layers65 × 58 mm
2 layers82.2 × 101.3 mm
Meshinger
Meshinger/Meshinger13KiCad Project for the Meshinger hardware
- Size
- 82.2 × 101.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 71
- Pads
- 223
- Tracks, vias
- 2,033, 44
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 May 2022
- Updated
- 21 May 2022
Overview
Meshinger is an open-source printed circuit board by Meshinger, from the Meshinger/Meshinger repository on GitHub. It is a 2-layer board of 82.2 × 101.3 mm with 42 parts on 71 nets, routed with 2,033 tracks and 44 vias.
It is built around the FAN53610AUC33X, SS2040FL and SKW92A, with the FH34SRJ-24S-0.5SH(99), LQM2MPN1R0MGHL and MCH3478-TL-W among its other parts. Its parts include 13 capacitors, 8 ICs, 7 connectors, 2 resistors and 2 transistors.
Main components
7
FAN53610AUC33X
WLCSP-6(0.9x1.2)-40℃~+85℃@(TA) 1 1A 2.3V~5.5V 26uA 3.3V 3MHz Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Output discharge、Cycle-by-cycle current limiting、Frequency synchronization Step-down type Yes WLCSP-6(0.9x1.2) DC-DC Converters ROHSonsemiDC-DC Converters
SS2040FL
SOD-123FLSOD-123FL Schottky Diodes ROHSFUXINSEMISchottky DiodesSKW92A
LCC-48_25x40.5mmUncategorisedSKYLABFH34SRJ-24S-0.5SH(99)
SMD,P=0.5mm,卧贴-55℃~+105℃ 0.3mm 0.5mm 1mm 24P Double-Sided Contacts, Top and Bottom Entry Gold Phosphor bronze Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSHirose ElectricFFC, FPC (Flat Flexible) Connector Assemblies
LQM2MPN1R0MGHL
08061.9A 1uH 2A 60MHz 64mΩ Multilayer inductor ±20% 0806 Power Inductors ROHSMurataInductors (SMD)
MCH3478-TL-W
SOT-323-3SOT-323-3 MOSFETs ROHSonsemiPre-Ordered Products
NTR2101P
SOT-23-55℃~+150℃ 1 P-Channel 1.173nF 120mΩ@1.8V 15nC@4.5V 1V 218pF 289pF 3.7A 8V 960mW P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8, C9, C10 |
| 4 | MountingHole_2.2mm_M2_DIN965_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | MH_CASE1, MH_CASE2, MH_KBD1, MH_KBD2 |
| 4 | SS2040FL | SS2040FL:SOD-123FL | U1, U2, U3, U6 |
| 2 | MountingHole_6.4mm_M6_Pad_TopBottom | MountingHole:MountingHole_6.4mm_M6_Pad_TopBottom | ANT1, ANT2 |
| 1 | 0.1uF | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | C11 |
| 1 | 0.1uF/16V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 0.47ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1043 | SamacSys_Parts:1043 | U7 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 10uH | Inductor_SMD:IND_LQH44PN100MJ0L | L1 |
| 1 | 1825232-1 | SamacSys_Parts:18252321 | S1 |
| 1 | 1uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 4.7uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | BBQ10KBD | BBQ10KBD:BM14B(0.8)-24DS-0.4V(53) | U4 |
| 1 | Barrel_Jack_Switch | SamacSys_Parts:PJ079BH | J4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J6 |
| 1 | FAN53610AUC33X | SamacSys_Parts:BGA6C40P2X3_86X116X62 | IC1 |
| 1 | FH34SRJ-24S-0.5SH(99) | FH34SRJ-24S:HRS_FH34SRJ-24S-0.5SH(99) | J1 |
| 1 | LOGO | Logo:Logo-175DPI | G*** |
| 1 | LQM2MPN1R0MGHL | SamacSys_Parts:LQM2MPN1R0NG0L | L2 |
| 1 | MCH3478-TL-W | MCH3478-TL-W:On_Semiconductor-MCH3478-TL-H-Manufacturer_Recommended | Q1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3D-SF | J2 |
| 1 | NTR2101P | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | RJ45_Amphenol_RJMG1BD3B8K1ANR | Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANR | J5 |
| 1 | SKW92A | SKW92A:SKYLAB_SKW92A | U5 |
| 1 | USB_A | Connector_USB:USB_A_Stewart_SS-52100-001_Horizontal | J3 |
Questions
How big is the Meshinger PCB?
It measures 82.2 × 101.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Meshinger use?
42 parts, built around the FAN53610AUC33X, SS2040FL, SKW92A and FH34SRJ-24S-0.5SH(99). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Meshinger KiCad files?
From the Meshinger/Meshinger repository on GitHub, at the commit this page was made from: the board is Meshinger/Meshinger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Meshinger design in my own project?
Its repository states no licence, so its author keeps all rights: ask Meshinger before reusing the design.
More from Meshinger/Meshinger
1Similar boards
- 2 layers104.7 × 135.6 mm
- 4 layers76 × 20 mm
- 2 layers90 × 50 mm
USB Hub V2.0
CarosCave/4_Port_2.0_USB-Hub
You will find the: - CAD-Files in the folder KiCAD - The manufacturing files in the folder Gerber-files - The PDF documents in the folder PDF - The licence files from CERN OHL v. 1.2 under Licence
62 parts2 - 2 layers
- 2 layers165 × 70 mm
Ev charger met16
ms270169/kicad
1) Voltage transformer module does not work Wrong operation amplifier on module (OP07C instead of LM358) PCB error on R3 (see netlist-reverse-engieneered.jpg)
70 partsMIT - 2 layers65 × 65.1 mm
Base heating
NerdyProjects/HouseBusNode
(Yet another) house bus hardware based on STM32F072 and the CAN bus
90 parts8 - 2 layers156 × 116 mm
- 4 layers50 × 35 mm
