
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly

Stm32 devboard is an open-source printed circuit board by merrittlj, from the merrittlj/stm32_devboard repository on GitHub. It is a 2-layer board of 21.6 × 50.4 mm with 31 parts on 45 nets, routed with 410 tracks and 45 vias.
It is built around the STM32F072CBT6. Its parts include 15 capacitors, 4 resistors, 3 diodes, 2 ICs and 2 switches. It belongs with the microcontroller boards boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C8, C10, C11, C13, C14 |
| 4 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C12, C15 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 2 | Conn_01x18 | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical | GPIO1, GPIO2 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 8MHz | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | AP2210-3.3 | Package_TO_SOT_SMD:SOT-23-3 | U1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | Prog1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Powered_On | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | Reset | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | STM32F072CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | Schottky | Diode_SMD:D_SOD-123 | D1 |
| 1 | User_Activation | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | User_Press | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly

dojoe/Twonkie
A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.

conol-ai/openmicrokbd
Open-source recreation of OpenAI's Codex Micro macropad — PCB written in CoHDL, an AI-native hardware description language. Rust firmware (embassy) + companion app (makepad). MIT licensed. https://openmicrokbd.org


sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard

sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072


It measures 21.6 × 50.4 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the STM32F072CBT6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the merrittlj/stm32_devboard repository on GitHub, at the commit this page was made from: the board is stm32_devboard.kicad_pcb and its schematic stm32_devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask merrittlj before reusing the design.