
SimonShield
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

A transistor-based astable multivibrator designed in KiCad 9.0 using BC547 transistors. The circuit alternately blinks two LEDs by means of RC timing networks and demonstrates oscillator fundamentals, schematic capture, PCB layout, routing.
Project2.kicad pro is an open-source printed circuit board by merincjoshy, from the merincjoshy/Astable-Multivibrator repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.2 × 37 mm with 11 parts on 8 nets, routed with 51 tracks and 0 vias.
It is built around the BC547. Its parts include 4 resistors, 2 capacitors, 2 diodes, 2 transistors and 1 connector.
This project is a transistor-based Astable Multivibrator PCB designed using KiCad 9. The circuit continuously oscillates between two unstable states, causing two LEDs to blink alternately.
The circuit consists of:
The transistors are cross-coupled through RC networks. The capacitors alternately charge and discharge, switching the transistors ON and OFF and producing alternate LED blinking.



| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 15K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3 |
| 2 | 390 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R4 |
| 2 | 53uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 9v | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!



ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

It measures 45.2 × 37 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the merincjoshy/Astable-Multivibrator repository on GitHub, at the commit this page was made from: the board is Ki-cad/project2.kicad_pro.kicad_pcb and its schematic Ki-cad/project2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).