Skip to the content
4 layers60 × 56 mmGPA RP Adapter, the printed circuit board in 3D

Adapter to connect GPA-FHDO to Red Pitaya

Size
60 × 56 mm
Copper layers
4
Thickness
1.6 mm
Parts
24
Nets
54
Pads
131
Tracks, vias
163, 11
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Oct 2020
Updated
27 Jul 2023

Overview

GPA RP Adapter is an open-source printed circuit board by menkueclab, from the menkueclab/GPA-RP-Adapter repository on GitHub. It is a 4-layer board of 60 × 56 mm with 24 parts on 54 nets, routed with 163 tracks and 11 vias.

It is built around the 74LVC1G17Z and RJ45. Its parts include 13 connectors, 3 capacitors, 2 ICs and 2 inductors. It belongs with the interfaces and adapters boards of this library.

Main components

2

README

README.md

GPA-RP-Adapter

This is a shield for the red pitaya (rp-122 or rp-125) to connect it easily to the GPA-FHDO.

Parts

  • pin header
  • RJ45 connector
  • schmitt trigger (optional)
  • SMA connector (optional)
  • capacitor (optional)
  • fan (optional)

for details see KiCad schematic.

Contributing

Benjamin Menkuec

Disclaimer

Not intended for medical use!

Parts

24
QtyValueFootprintReferences
310uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2, C3
274LVC1G17Package_TO_SOT_SMD:SOT-23-5_HandSolderingU1, U2
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3, J7
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5, J9
2Conn_CoaxialConnector_Coaxial:SMA_Amphenol_132134_VerticalJ2, J6
2LInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1, L2
1Analog In 0Connector_Coaxial:SMA_Amphenol_132134_VerticalJ12
1Analog In 1Connector_Coaxial:SMA_Amphenol_132134_VerticalJ13
1Analog Out 0Connector_Coaxial:SMA_Amphenol_132134_VerticalJ16
1Analog Out 1Connector_Coaxial:SMA_Amphenol_132134_VerticalJ17
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ11
1Extension Connector E1Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_VerticalE1
1Extension Connector E2Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_VerticalE2
1PWR_FanConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1RJ45Connector_RJ:RJ45_Amphenol_54602-x08_HorizontalJ4

The 22 most common of 24 parts.

Similar boards

  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers120 × 130 mmSingularitySurfer V1, the printed circuit board in 3D

    SingularitySurfer V1

    nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier

    Repository for the development of an FPGA based DSP Lock-In Amplifier

    174 parts80MIT
  • 2 layers24 × 38 mmBSH Board, the printed circuit board in 3D

    BSH Board

    Bouni/BSH-Board

    A board that interfaces the DBUS of several home appliances and brings them into Home-Assitant via ESPHome

    75 parts65
  • 2 layers47 × 50 mmSDBox, the printed circuit board in 3D

    SDBox

    jbilander/SDBox-v2

    SDBox-v2 for Amiga, compatible with the new updated card-detect firmware

    22 parts53GPL-3.0
  • 4 layers83.1 × 92.5 mmTildagon base, the printed circuit board in 3D

    Tildagon base

    emfcamp/badge-2024-hardware

    183 parts40
  • 2 layers25 × 25 mmRp2040-bento, the printed circuit board in 3D

    Rp2040-bento

    ergomechstore/rp2040-bento

    The RP2040-bento is a breakout board for the RP2040 MCU.

    32 parts38MIT
  • 4 layers165 × 107 mmSpla board, the printed circuit board in 3D

    Spla board

    khaydarian/spla

    SNES PPU Logic Analyzer

    290 parts32
  • 2 layers100 × 100 mmM68k, the printed circuit board in 3D

    M68k

    annoyatron255/m68k

    A Motorola 68000 Computer

    110 parts24

Questions

How big is the GPA RP Adapter PCB?

It measures 60 × 56 mm and has 4 copper layers, 1.6 mm thick.

What parts does the GPA RP Adapter use?

24 parts, built around the 74LVC1G17Z and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GPA RP Adapter KiCad files?

From the menkueclab/GPA-RP-Adapter repository on GitHub, at the commit this page was made from: the board is GPA-RP-Adapter/GPA-RP-Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GPA RP Adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask menkueclab before reusing the design.