Skip to the content
2 layers99.1 × 76.2 mmOptiprodV2, the printed circuit board in 3D

SemesterProject

Size
99.1 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
93
Pads
139
Tracks, vias
108, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
14 Sep 2023
Updated
15 Jan 2024

Overview

OptiprodV2 is an open-source printed circuit board by melROLL, from the melROLL/Opti.Prod repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.1 × 76.2 mm with 47 parts on 93 nets, routed with 108 tracks and 0 vias.

It is built around the DS18B20 and TL082. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Opti-prod: Solar Production System Optimization

SemesterProject

Project Overview:

The Opti-prod project, a fifth-year endeavor, aims to optimize solar production systems through the development of an embedded system. This system is designed to collect weather data, specifically temperature and solar flux (in W/m²), from rooftop installations in photovoltaic solar production sites. Additionally, the project includes the development of an algorithm that correlates real-time weather data with production data from inverters. If a significant and prolonged deviation between expected and actual production is detected, the system triggers an alert (e.g., email, SMS). The system must also be capable of detecting production faults at the inverter level. Both the weather measurement and production calculation/alarm functionalities can be implemented on the same hardware platform. All system data must be accessible via the Modbus TCP protocol through a PC supervisory control system (GTC). The software developed will provide real-time analysis and alerts on the client computer.

Project Team:

  • Felipe Bartbaste
  • Haoyu Wang
  • Melvyn Rolland
  • Meriam Mhedhbi
  • Zhuodong Kang

Specifications

General Specifications

The project, a fifth-year initiative, consists of two main parts:

  1. Measurement Module (MM): This module is responsible for acquiring physical data such as temperature and solar flux. It comprises two components: the sensor part (MMC) located on the rooftop and the processing part (MMT). The MMC must withstand external environmental factors like rain, wind, and UV radiation. The MMT converts electrical readings into usable temperature and solar flux values and makes them available to the analysis module.

  2. Installation Analysis Module (MAI): This module acquires production data from inverters (power, energy, status codes), calculates expected values based on installation and weather data from the MM, analyzes production data, and sends alerts (via email) if a fault or anomaly is detected. The software developed provides real-time analysis and alerts on the client computer.

Measurement Module Specifications (MM)

  • Consists of two parts: MMC (external rooftop sensors) and MMT (processing unit).
  • Maximum distance between MMC and MMT: 100 meters with a maximum of 4 wires.
  • Low power consumption.
  • Capable of calculating daily average temperature and cumulative energy received in kWh/m².
  • All data, both instantaneous and calculated, accessible via Modbus TCP protocol.
  • Provides a USB serial port for configuration, sensor calibration, data inspection, and real-time communication monitoring.
  • Equipped with LEDs for power status, module status, and fault indication.
  • Includes a reset/reboot button and software watchdog for module recovery.

Installation Analysis Module Specifications (MAI)

  • Capable of managing up to 10 inverters.
  • Acquires data from inverters and weather data (from MM) via Modbus TCP.
  • Calculates expected power with high precision.
  • Compares expected power to actual power and sends emails to notify stakeholders of prolonged anomalies.
  • Maintains a log of operation, including timestamped records of anomalies and faults.
  • Web-based user interface for configuration, adjustment of variables/parameters, real-time data inspection, and monitoring of communication with inverters and MM.
  • Ability to reset alarm flags.

These specifications outline the minimum hardware and software requirements for the system and its components, ensuring the project's success in optimizing solar production systems and providing real-time analysis and alerts on the client computer.

Parts

47
QtyValueFootprintReferences
11MountingHole_PadConnector_Pin:Pin_D1.3mm_L11.0mm3.3V1, A1, CS1, GND1, GNDIN1, GNDIN2, IN1, SCL1, SDA1, SDO1, VCC1
6MountingHole_PadConnector_Pin:Pin_D1.0mm_L10.0mmFollower1, Follower2, GNDS1, SCL2, SDA2, VCCS1
4LOGOLogo.preety:ZHK8MMG***, G***, G***, G***
4LOGOLogo.preety:Haoyu8MMG***, G***, G***, G***
4LOGOLogo.preety:10mmlogoRWG***, G***, G***, G***
4LOGOLogo.preety:FelipeBarbaste10mmG***, G***, G***, G***
3RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal1K2, 4.7K1, 51K1
21N4733Diode_THT:D_A-405_P12.70mm_HorizontalDZ5, DZ6
2LOGOLogo.preety:Moneymoney30Gkhbhb, Gkhbhb
2LOGOLogo.preety:EPFLOGO15MMGejghjv, Gejghjv
1Arduino_Mega2560_R3_ShieldPCM_arduino-library:Arduino_Mega2560_R3_ShieldA2
1DS18B20Package_TO_SOT_THT:TO-92_Inline_WideDS18B20
1LOGOLogo.preety:ElfamosoMelvyn5mmG***
1TL082Package_DIP:DIP-8_W7.62mmMCP602
1TrimPot_T73YEt_1kPCM_Potentiometer_THT_US_AKL:Potentiometer_Bourns_3296W_Vertical1K1

More from melROLL/Opti.Prod

2
  • 2 layers88.9 × 53.3 mmOptiprodV2, the printed circuit board in 3D

    OptiprodV2

    melROLL/Opti.Prod

    SemesterProject

    38 partsGPL-3.0

Similar boards

  • 2 layers80 × 66 mmGearbox 00, the printed circuit board in 3D

    Gearbox 00

    dzavalishin/hardware

    Misc smart house hardware

    82 parts3
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers82.1 × 82.1 mmUncut Gem, the printed circuit board in 3D

    Uncut Gem

    QuantumVillage/UncutGem

    A prototype Full Stack fully Open Source NV Center Diamond Magnetometer

    207 parts210AGPL-3.0
  • 2 layers96.8 × 97 mmPsoc5power, the printed circuit board in 3D

    Psoc5power

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    133 parts59
  • 2 layers130.6 × 112 mmSWN, the printed circuit board in 3D

    SWN

    4ms/SWN

    Spherical Wavetable Navigator source code

    614 parts43
  • 2 layers48 × 36.5 mmOsillyscope etchable, the printed circuit board in 3D

    Osillyscope etchable

    tvlad1234/osillyscope

    Low cost, low part count CH32V003-based oscilloscope

    31 parts30MIT
  • 2 layers60 × 50 mmEurorack volca, the printed circuit board in 3D

    Eurorack volca

    grappendorf/eurorack-volca

    Mounting Korg Volcas into a Eurorack system

    25 parts19
  • 2 layers79 × 107 mmEurorack spinfx, the printed circuit board in 3D

    Eurorack spinfx

    grappendorf/eurorack-spinfx

    Spin FV-1 based effects module for Eurorack systems

    80 parts16

Questions

How big is the OptiprodV2 PCB?

It measures 99.1 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OptiprodV2 use?

47 parts, built around the DS18B20 and TL082. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OptiprodV2 KiCad files?

From the melROLL/Opti.Prod repository on GitHub, at the commit this page was made from: the board is Clean_Realease/Kicad_Schem_And_PCB/OptiprodV2.kicad_pcb and its schematic Clean_Realease/Kicad_Schem_And_PCB/OptiprodV2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the OptiprodV2 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).