2 layers36 × 70 mm
2 layers148.5 × 217.7 mm
- Size
- 148.5 × 217.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 79
- Pads
- 265
- Tracks, vias
- 722, 132
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Jul 2024
- Updated
- 25 Jul 2024
Overview
Name is an open-source printed circuit board by MelonMars, from the MelonMars/AvionicsPCB repository on GitHub. It is a 2-layer board of 148.5 × 217.7 mm with 53 parts on 79 nets, routed with 722 tracks and 132 vias.
It is built around the ATMEGA328P-AU, CH340N and ADXL343BCC, with the TP4057, AO3401A and SS34 among its other parts. Its parts include 16 diodes, 14 resistors, 11 capacitors, 6 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CH340N
SOP-8-20℃~+70℃ 1 2Mbps 3.3V、5V USB 2.0 USB to serial SOP-8 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
ADXL343BCC
LGA143-Axis, ±2g/±4g/±8g/±16g Digital MEMS AccelerometerAnalog DevicesUncategorised
TP4057
SOT-23-6-40℃~+85℃ 1 25uA 4.24V 4V~6.5V Charging IC Lithium Battery Not supported SOT-23-6 Battery Management ROHSTECH PUBLICBattery Management
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | NeoPixel_THT | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | 100 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C6, C7, C10 |
| 3 | 1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8, C11 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R13, R14 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R10 |
| 2 | 12pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | LED | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D12, D13 |
| 1 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | ADXL343 | Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U2 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano_WithMountingHoles | A1 |
| 1 | C8678 | Diode_SMD:D_SMA | D16 |
| 1 | C8678 | Diode_SMD:D_SMC_Handsoldering | D9 |
| 1 | CH340N | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | GREEN | Diode_SMD:D_SMC_Handsoldering | D11 |
| 1 | GREEN | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D15 |
| 1 | MS5607-02BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U7 |
| 1 | RED | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D14 |
| 1 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | TP4057 | Package_TO_SOT_SMD:TSOT-23-5 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A | J2 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U6 |
| 1 | YELLOW | Diode_SMD:D_SMC_Handsoldering | D10 |
Questions
How big is the Name PCB?
It measures 148.5 × 217.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Name use?
53 parts, built around the ATMEGA328P-AU, CH340N, ADXL343BCC and TP4057. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Name KiCad files?
From the MelonMars/AvionicsPCB repository on GitHub, at the commit this page was made from: the board is src/name.kicad_pcb and its schematic Avionics/LED_BLOCK.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Name design in my own project?
Its repository states no licence, so its author keeps all rights: ask MelonMars before reusing the design.
Similar boards
- 2 layers98.8 × 55.1 mm
H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT - 2 layers65 × 63.5 mm
- 2 layers69.1 × 56.6 mm
- 2 layers155 × 71 mm
Panel
PHS-SMCS/Falconia-Beacon
Falconia Beacon is an ATTINY816-based, CR2032-powered LED beacon board used to make the Falconia rover visible to the SMCS Pi-in-the-sky satellite.
395 parts - 2 layers61.2 × 35.5 mm
KitchenSink
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 4 layers65 × 65.5 mm
- 4 layers60 × 60 mm
Minion
vibsthebot/minion
I'm a mac user, and i love my apple wired headphones. mN phone doesn't have headphone jack and my computer doesn't have micro sd or usb a.
79 parts1