
Axis V2
Meigs2/Axis
An open source espresso machine controller inspired by the Gaggiuinio Project

An open source espresso machine controller inspired by the Gaggiuinio Project
Axis V2 HV is an open-source printed circuit board by Meigs2, from the Meigs2/Axis repository on GitHub. It is a 2-layer board of 100 × 60 mm with 43 parts on 41 nets, routed with 186 tracks and 15 vias.
It is built around the AQH3213, PCA9536DP and BC847, with the MOV-10D471K, 1N4148W and MB6S among its other parts. Its parts include 14 resistors, 6 connectors, 5 capacitors, 3 ICs and 3 transistors.
This project is unfinished and is under active development.
For updates, come join the discord: https://discord.gg/SSdEUZB4Xh
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R11, R14 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | 0.1u | Capacitor_THT:C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 | C3, C4 |
| 2 | 162 | Resistor_SMD:R_0603_1608Metric | R9, R12 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R13 |
| 2 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R8 |
| 2 | AQH3213 | Package_DIP:DIP-8-N7_W7.62mm | U1, U3 |
| 2 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | Fuse (1A, Slow) | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F2, F3 |
| 2 | MOV-10D471K | Varistor:RV_Disc_D12mm_W7.5mm_P7.5mm | RV1, RV2 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D2 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 1n | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 22k | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 3WAY | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | 4N35 | Package_DIP:SMDIP-6_W7.62mm | OC1 |
| 1 | AC | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Conn_01x08 | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J1 |
| 1 | Fuse (3A, slow) | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | MB6S | Package_TO_SOT_SMD:TO-269AA | D1 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PCA9536DP | Package_SO:TSSOP-8_3x3mm_P0.65mm | U2 |
| 1 | PUMP | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | PWR | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | SSR | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |

Meigs2/Axis
An open source espresso machine controller inspired by the Gaggiuinio Project

Meigs2/Axis
An open source espresso machine controller inspired by the Gaggiuinio Project

Meigs2/Axis
An open source espresso machine controller inspired by the Gaggiuinio Project

unterdrueckt/OpenBlind32
ESP32-C3 (Super Mini) based controller for blinds / rafstore.


makeTVee/MYNDlights
Adding lights to a Teufel Mynd bluetooth speaker


Benedikt3141/Smart-Irrigation-System
A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.

nrdsp/rvPhone
The goal of the this project is to develop a privacy enhanced, simple and fully featured mobile phone.

VEXU-GHOST/ghost_kicad
Welcome to UT IEEE RAS VEXU GHOST's repository for our PCB developments! - PCB Images - Onboarding

It measures 100 × 60 mm and has 2 copper layers, 1 mm thick.
43 parts, built around the AQH3213, PCA9536DP, BC847 and MOV-10D471K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Meigs2/Axis repository on GitHub, at the commit this page was made from: the board is hardware/pcbs/Axis_V2_HV/Axis_V2_HV.kicad_pcb and its schematic hardware/pcbs/Axis_Base_Rev01/Axis_Base_Rev01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Meigs2 before reusing the design.