

Arcus
Hack Club's Parthenon PCB Badge (with an RP2040 and ePaper display)
- Size
- 110 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 72
- Pads
- 222
- Tracks, vias
- 443, 53
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Nov 2025
- Updated
- 7 Dec 2025
Overview
Arcus is an open-source printed circuit board by MeghanaM4, from the MeghanaM4/arcus repository on GitHub. It is a 2-layer board of 110 × 52 mm with 72 parts on 72 nets, routed with 443 tracks and 53 vias.
It is built around the RP2040, W25Q128JVSIQ and AFC07-S24FCA-00, with the AMS1117-3.3, MBR0530 and ABM8-272-T3 among its other parts. Its parts include 29 capacitors, 9 resistors, 4 ICs, 4 diodes and 2 switches. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
Main components
6RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAFC07-S24FCA-00
SMD,P=0.5mm,卧贴0.3mm 0.5mm 24P 2mm Bottom Contact Copper alloy Slide Lock Surface Mount, Right Angle Tin SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSJUSHUOFFC, FPC (Flat Flexible) Connector AssembliesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdarcus
Hack Club's Parthenon PCB Badge (with an RP2040 and ePaper display)
PCB
Schematic
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +4 |
| 12 | 1μF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C7, C8, C9, C10, C13, C21, C28 |
| 11 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6, C14, C15, C16, C17, C18, C19, C20, C22, C23, C24 |
| 4 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D5, D6, D7 |
| 2 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R7, R10 |
| 2 | 10μF | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C25, C26 |
| 2 | 1kΩ | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 27.4Ω | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 4.7μF | Capacitor_SMD:C_0402_1005Metric | C27, C29 |
| 2 | 5.1kΩ | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 1 | 0.47Ω | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 10μH 1A | Inductor_SMD:L_APV_ANR4018 | L2 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | AFC07-S24FCA-00 | arcus:LCSC_1x24-1MP_P0.5mm_Horizontal | U1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | IRLML2060 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | SW_PUSH | arcus:SW_Push_SPST_TSA016 | SW1 |
| 1 | SW_Push | arcus:SW_Push_SPST_TSA016 | SW2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | W25Q128JVSIQ | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U4 |
Questions
How big is the Arcus PCB?
It measures 110 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arcus use?
72 parts, built around the RP2040, W25Q128JVSIQ, AFC07-S24FCA-00 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arcus KiCad files?
From the MeghanaM4/arcus repository on GitHub, at the commit this page was made from: the board is arcus.kicad_pcb and its schematic arcus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arcus design in my own project?
Its repository states no licence, so its author keeps all rights: ask MeghanaM4 before reusing the design.
Similar boards
- 4 layers74.1 × 130 mm

- 2 layers62 × 47 mm

- 4 layers279.5 × 97 mm

Alpha centauri pcb
jacob-w-gable/alpha_centauri
A split, ergonomic, mechanical keyboard with 40 keys, designed for typing speed and comfort.
224 parts1MIT - 4 layers51.1 × 40.7 mm

- 2 layers65.1 × 60 mm

- 2 layers100 × 60 mm

- 4 layers91 × 91 mm

- 4 layers45 × 76 mm
